4.0 ± 0.1 0.30 ±0.05 • See Note 1 1.75 ± 0.1 2.0 ± 0.1 Note 6 1.5+0.1/-0.0 DIA. A 0.3 R MAX. 11.5 ± 0.1 Note 6 Bo 24.0 ± 0.3 Ko SECTION A-A Ao = 13.0 mm Bo = 13.0 mm Ko = 4.9 mm A 16.0 ± 0.1 0.5 RADIUS TYPICAL 1.5 MIN Ao ± 0.1 ± 0.1 ± 0.1 Notes: 1. 10 sprocket hole pitch cumulative tolerance 2. Camber not to exceed 1mm in 100mm 3. Material: Conductive Black Advantek Polystyrene 4. Ao and Bo measured on a plane 0.3mm above the bottom of the pocket 5. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier. 6. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. - All Dimensions in Millimeters - ± 0.2 REVISIONS TOLERANCES (EXCEPT AS NOTED) DECIMAL NO. 1 DESCRIPTION Pocket Hole was 1.55+1.00/-0.05 DIA. ± DATE Advantek Part Number PLCC28-AC PLCC 28 Carrier Tape BY 3/3/94 A T.S. 2 FRACTIONAL 3 DRAWN BY ± BJD SCALE CHK'D DATE TRACED APP'D 4 ± see Note 3 DRAWING NO. 12/28/88 ANGULAR 5 MATERIAL 2.5 mm = 1 mm A0103-89-4 1