LIEBERT® INTELLISLOT® 485 CARDS Liebert IntelliSlot 485 Card Liebert IntelliSlot 485 Card-LBDS Liebert IntelliSlot 485 Card-L Liebert IntelliSlot 485 Card-S Liebert IntelliSlot 485 Card-X Product Specification / Installation Sheet Description Liebert IntelliSlot 485 cards provides Liebert SiteScan® Web or Building Management Systems monitoring and control of your Liebert equipment. The card delivers Modbus or the Emerson Protocol via the RS-485 port. DTE/DB9F serial port for configuration (requires null-modem connection) RS-485 (for Modbus) OR RS-422 (for IGM) Depends on configuration by user Compatibility With Other Emerson Network Power Products The Liebert IntelliSlot 485 Card family, formerly the Liebert OpenComms™ line, includes: Liebert IntelliSlot Card Part Number Compatible with: • Liebert GXT • Liebert GXT2U™ • Liebert NX™ • Liebert GXT 6kVA&10kVA • Liebert Hinet™ • Liebert PowerSure PSI™ (before July 2008) • Liebert Nfinity® • Liebert GXT3™ ™ Liebert IntelliSlot 485 Card OC-485 Units with Liebert iCOM® Firmware prior to PA1.04.033.STD: • Liebert Challenger 3000™ • Liebert Deluxe • Liebert PeX™ Liebert IntelliSlot 485 Card-LBDS OC485-LBDS • Liebert Challenger ITR™ System/3™ • Liebert XDC™ with ™ Liebert iCOM • Liebert DS™ • Liebert CW • Liebert XDF™ • Liebert HPC™ • Liebert HPM™ • Liebert APM™ • Liebert CRV™ • Liebert XDP™ with Liebert iCOM Units with Liebert iCOM Firmware PA1.04.033.STD or later: • Liebert Challenger 3000 • Liebert Deluxe • Liebert PeX System/3 • Liebert Challenger ITR • Liebert XDC with • Liebert DS Liebert iCOM • Liebert CW Liebert IntelliSlot 485 Card-L IS-485L Liebert IntelliSlot 485 Card-S IS-485S Units with Liebert IntelliSlot support only: • Liebert PPC™ • Liebert FDC™ • Liebert FPC™ • Liebert RDC™ Liebert IntelliSlot 485 Card-X IS-485X • Liebert NXL™ (SA, SR, SN, MM, CD), Alber® BDSU™ • Liebert RX™ Liebert IntelliSlot Card Communication Protocols The 485 cards support the following protocols: Communication Protocol Liebert IntelliSlot Card Part Number Liebert IntelliSlot 485 Card OC-485 Liebert IntelliSlot 485 Card-LBDS OC485-LBDS Liebert IntelliSlot 485 Card-L IS-485L Liebert IntelliSlot 485 Card-S IS-485S Liebert IntelliSlot 485 Card-X IS-485X 1 MODBUS/485 IGM — — — Wiring Specifications Supported Wire Type Connection RS-422 (IGM) RS-485 (Modbus) RS-232 DB-9F Connector 18-22 AWG Stranded & Shielded 18 AWG recommended 18-22 AWG Stranded & Shielded 18 AWG recommended Null Modem Cable DTE Null Modem Cable Max. Wire Length Non Plenum - Belden 9461 Plenum - Belden 88761 Non Plenum - Belden 9461 Plenum - Belden 88761 Null Modem Cable DTE Null Modem Cable 1000 ft. (300m) 3000 ft. (915m) 50 ft. (15.3m) Dimensions Faceplate TOP VIEW RS-232 port FRONT VIEW 3" (76mm) 4-3/4" (121mm) RS485 RS232 1-1/2" (38mm) - + 1/2" (11mm) 2-3/8" (60.3mm) Specifications AC Inputs DC Inputs Power Consumption Dimensions - W x D x H: in. (mm) Net - oz. (kg) Weight Shipping - lb. (kg) Ambient Operating Environment, °F (°C) Ambient Storage Temperature, °F (°C) Protection Service Terminal (RS-232) Communication Modbus (RS-485) Ports IGM (RS-422) Power Requirements 18 - 24 VAC; 50/60 Hz 12 - 36VDC 6VA maximum (1.75W) 3 x 5-1/4 x 1-1/2 (76 x 134 x 38) 7 (0.2) 1.3 (0.6) 32 to 104 (0 to 40); 10% to 90% RH (non-condensing) -4 to 140 (-20 to 60) SELV Isolated User Connections, Watchdog Timer Circuitry DB9F, DTE 2-Position Terminal Block 2-Position Terminal Block Liebert Corporation 1050 Dearborn Drive P.O. Box 29186 Columbus, OH 43229 Telephone: 1-800-877-9222 Facsimile: 1-614-841-6022 www.liebert.com © 2007 Liebert Corporation All rights reserved throughout the world. Specifications subject to change without notice. ® Liebert is a registered trademark of Liebert Corporation. All names referred to are trademarks or registered trademarks of their respective owners. SL-28160_REV8_08-13 2