IRR60-48C/TR8 Features ․Compatible with infrared and vapor phase reflow solder process. ․Compatible with automatic placement equipment. ․Bi-color LED wavelength. (660nm, 905nm) ․Pb free ․The product itself will remain within RoHS compliant version. Descriptions ․IRR60-48C/TR8 is an infrared emitting diode in miniature SMD package which is molded in a water clear plastic with flat top view lens. The device is spectrally matched with silicon photodiode and phototransistor. Applications ․Sensor ․Oximeter Device Selection Guide 1 Revision LED Part No. Chip Material Lens Color IRR60-48C/TR8 GaAlAs Water clear Copyright © 2010 Everlight All Rights Reserved. Release Date:20150210 IssueNo:DIR-0001349 :1 LifecyclePhase: www.everlight.com Release Date:2015-02-12 14:13:22.0 Expired Period: Forever DATASHEET IRR60-48C/TR8 Top view Bottom view solder pattern Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ±0.1mm Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Continuous Forward Current IF Peak Forward Current IFP *1 Rating 660nm(Red) 905nm(IR) Unit 50 500 mA V ℃ mA Reverse Voltage VR Operating Temperature Topr 5 -25~ +85 Storage Temperature Tstg -25~ +85 ℃ Tsol 260 ℃ Soldering Temperature *3 Power Dissipation at(or below) 25℃Free Air Temperature Temperature resistance junction ambient Pd 110 Rthj-a 80 550 mW K/W Notes: *1:IFP Conditions--Pulse Width≦100μs and Duty≦1%. *2:Soldering time≦5 seconds. 2 Revision Copyright © 2010 Everlight All Rights Reserved. Release Date:20150210 IssueNo:DIR-0001349 :1 LifecyclePhase: www.everlight.com Release Date:2015-02-12 14:13:22.0 Expired Period: Forever DATASHEET IRR60-48C/TR8 Electro-Optical Characteristics (Ta=25℃) Parameter Radiant Intensity Symbol Red IE IR Peak Wavelength λp Spectral Bandwidth Δλ Red IR Red IR Red Forward Voltage VF Reverse Current IR View Angle 3 Revision 2θ1/2 IR Red IR Red IR Condition IF=20mA IF=20mA IF=20mA IF=20mA VR=5V IF=20mA Min. Typ. Max. 0.5 1.6 -- 0.5 0.9 -- 657 660 663 895 915 -- 905 20 -- 60 -- 2.0 2.2 2.6 1.2 1.4 1.8 -- -- 10 --- -125 10 -- -- 145 -- Copyright © 2010 Everlight All Rights Reserved. Release Date:20150210 IssueNo:DIR-0001349 :1 LifecyclePhase: -- Unit mW /sr nm nm V μA deg www.everlight.com Release Date:2015-02-12 14:13:22.0 Expired Period: Forever DATASHEET IRR60-48C/TR8 Typical Electro-Optical Characteristics Curves Fig.1 Forward Current vs. Ambient Temperature Red IR 60 I F - F o rw a rd C u rre n t ( m A ) 50 40 30 20 10 0 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig.2 Spectral Distribution IR 1.0 1.0 0.8 0.8 Relative Radinat Intensity (%) Relative Radinat Intensity (%) Red 0.6 0.4 0.2 0.0 550 575 600 625 650 675 700 725 750 0.6 0.4 0.2 0.0 700 725 750 775 800 825 850 875 900 925 950 975 1000 Wavelength (nm) Wavelength (nm) 4 Revision Copyright © 2010 Everlight All Rights Reserved. Release Date:20150210 IssueNo:DIR-0001349 :1 LifecyclePhase: www.everlight.com Release Date:2015-02-12 14:13:22.0 Expired Period: Forever DATASHEET IRR60-48C/TR8 Typical Electro-Optical Characteristics Curves Fig.3 Radiant Intensity vs. Forward Current Red IR Fig.4 Forward Current vs. Forward Voltage Red 5 Revision IR Copyright © 2010 Everlight All Rights Reserved. Release Date:20150210 IssueNo:DIR-0001349 :1 LifecyclePhase: www.everlight.com Release Date:2015-02-12 14:13:22.0 Expired Period: Forever DATASHEET IRR60-48C/TR8 Typical Electro-Optical Characteristics Curves Fig.5 Relative Radiant Intensity vs. Angular Displacement Red IR 6 Revision Copyright © 2010 Everlight All Rights Reserved. Release Date:20150210 IssueNo:DIR-0001349 :1 LifecyclePhase: www.everlight.com Release Date:2015-02-12 14:13:22.0 Expired Period: Forever DATASHEET IRR60-48C/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less. 2.5 The LEDs should be used within 72hours (3days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 7 Revision Copyright © 2010 Everlight All Rights Reserved. Release Date:20150210 IssueNo:DIR-0001349 :1 LifecyclePhase: www.everlight.com Release Date:2015-02-12 14:13:22.0 Expired Period: Forever DATASHEET IRR60-48C/TR8 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 8 Revision Copyright © 2010 Everlight All Rights Reserved. Release Date:20150210 IssueNo:DIR-0001349 :1 LifecyclePhase: www.everlight.com Release Date:2015-02-12 14:13:22.0 Expired Period: Forever DATASHEET IRR60-48C/TR8 Package Dimensions Carrier Tape Dimensions: Loaded quantity 1000 PCS per reel. Note: 1. Dimensions are in millimeters 2. The tolerances unless mentioned is ±0.1mm 9 Revision Copyright © 2010 Everlight All Rights Reserved. Release Date:20150210 IssueNo:DIR-0001349 :1 LifecyclePhase: www.everlight.com Release Date:2015-02-12 14:13:22.0 Expired Period: Forever DATASHEET IRR60-48C/TR8 Moisture Resistant Packaging Aluminum moistue-proof bag Label Desiccant Label Label Form Specification Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX CAT : XXX HUE : XXX REF : XXX CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 10 Revision Copyright © 2010 Everlight All Rights Reserved. Release Date:20150210 IssueNo:DIR-0001349 :1 LifecyclePhase: www.everlight.com Release Date:2015-02-12 14:13:22.0 Expired Period: Forever