® CD62__15C CD67__15C Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 http://www.pwrx.com POW-R-BLOK Dual SCR/Diode Isolated Module 150 Amperes / 2000 to 2500 Volts TM Description: Powerex SCR/Diode Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. Features: Electrically Isolated Heatsinking Compression bonded construction Low Thermal Impedance for Improved Current Capability Quick Connect Gate Terminal with Provision for Keyed Mating Plug RoHS Compliant UL Recognized (E78240) Benefits: No Additional Insulation Components Required Easy Installation No Clamping Components Required Reduce Engineering Time Applications: Outline Dimensions Bridge Circuits AC & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends Lighting Control Heat & Temperature Control Welders Ordering Information: Dimension Inches Millimeters A 3.70 94 B 1.34 34 C 1.15 29.2 D 3.15 80 E 0.94 24 F 0.91 23 G 0.51 13 H 0.35 9 J M6 M6 K 0.24 6.2 M 0.19 4.9 R 0.03 X 0.11 2.8 X 0.8 Select the complete nine digit module part number from the table below. Example: CD622215C is a 2200Volt, 150 Ampere SCR/ Diode Isolated TM POW-R-BLOK Module Type CD62 CD67 Voltage Current Volts Amperes (x100) 20 22 24 25 15 (150 A) Version C Note: Dimensions are for reference only. Revision Date: 08/31/2011 ® CD62__15C CD67__15C Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 http://www.pwrx.com POW-R-BLOK Dual SCR/Diode Isolated Module 150 Amperes / 2000 to 2500 Volts TM Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Forward and Reverse Blocking Voltage VDRM & VRRM 2000 to 2500 V Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) VRSM VRRM + 200 V RMS Forward Current 180° Conduction, TC=83°C IT(RMS) 235 A Average Forward Current 180° Conduction, TC=83°C IT(AV) 150 A Peak One Cycle Surge Current, Non-Repetitive 50 Hz, 60% VRRM reapplied, Tj=125°C ITSM 4,500 A I2t for Fusing for One Cycle 50 Hz, 60% VRRM reapplied, Tj=125°C I2t 103,000 A2 sec Tj=125°C, ITM=320A , IG=1.5 A, Tr < 0.5µs di/dt 100 A/µs Operating Temperature TJ -40 to +125 °C Storage Temperature Tstg -40 to +125 °C 53 6 53 6 320 0.71 in.-Lb. Nm in.-Lb. Nm g lb 2500 3000 V V Maximum Rate-of-Rise of On-State Current, Repetitive Max. Mounting Torque, M6 Mounting Screw on Terminals Max. Mounting Torque, Module to Heatsink Module Weight, Typical V Isolation @ 25C Tj= 25°C, 1 minute Tj= 25°C, 1 second Vrms Vrms Information presented is based upon manufacturers testing and projected capabilities. This information is subject to change without notice. The manufacturer makes no claim as to the suitability of use, reliability, capability, or future availability of this product. Revision Date: 08/31/2011 ® CD62__15C CD67__15C Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 http://www.pwrx.com POW-R-BLOK Dual SCR/Diode Isolated Module 150 Amperes / 2000 to 2500 Volts TM Electrical Characteristics, TJ=25°C unless otherwise specified Characteristics Repetitive Peak Forward Leakage Current Repetitive Peak Reverse Leakage Current Symbol Test Conditions IDRM At VDRM, TJ=125°C Min. Max. Units 25 mA IRRM At VRRM, TJ=125°C 25 mA VTM / VFM ITM / IFM =480A 2.20 V Threshold Voltage, Low-level Slope Resistance, Low-level V(TO)1 rT1 TJ = 125°C, I = 16.7% x IT(AV) to IT(AV) 1.10 1.96 V m Minimum dV/dt dV/dt Exponential to 2/3 VDRM Tj=125°C, Gate Open Gate Trigger Current IGT Tj= 25°C, VD=12V, IA= 1A 150 mA Gate Trigger Voltage VGT Tj= 25°C, VD=12V, IA= 1A 3.0 Volts Non-Triggering Gate Voltage VGDM Tj=125°C, VD=VDRM 1.0 Volts Non-Triggering Gate Current IGDM Tj=125°C, VD=VDRM 30 mA IH TJ=25°C (Typical) mA Peak On-State Voltage Holding Current 800 150 V/µs Thermal Characteristics Characteristics Thermal Resistance, Junction to Case DC Operation Thermal Resistance, Case to Sink Lubricated Symbol Max. Units RΘJ-C Per Junction, both conducting 0.17 °C/W RΘC-S Per Module 0.08 °C/W Revision Date: 08/31/2011 ® CD62__15C CD67__15C Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 http://www.pwrx.com POW-R-BLOK Dual SCR/Diode Isolated Module 150 Amperes / 2000 to 2500 Volts TM Maximum On-State Forward Voltage Drop Maximum Transient Thermal Impedance (Junction to Case) ( Tj = 125 C ) 0.18 5 Thermal Impedance - Rjc - °C/W On-State Voltage - Vtm - Volts 0.16 4 3 2 0.14 0.12 0.1 0.08 0.06 0.04 1 0.02 0 10 100 1000 0 0.0001 10000 0.001 0.01 Instantaneous On-State Current - Itm - Amperes 0.1 1 10 100 Time - t - Seconds Maximum Allowable Case Temperature Maximum On-State Power Dissipation (Sinusoidal Waveform) (Sinusoidal Waveform) 180° 120° 90° 200 60° 30° 15° 150 120 Max. Case Temperature - Tcase - °C Maximum Power Dissipation Per SCR - Watts 250 100 50 0 110 15° 100 30° 90 60° 90° 120° 180° 80 70 0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 Average On-State Current - It(av) - Amperes Average On-State Current - It(av) - Amperes Maximum On-State Power Dissipation Maximum Allowable Case Temperature (Rectangular Waveform) 140 160 (Rectangular Waveform) 360° 300 270° 180° 250 120° 90° 60° 200 30° 15° 150 120 Max. Case Temperature - Tcase - °C Maximum Power Dissipation Per SCR - Watts 350 100 110 100 90 80 30° 90° 120° 180° 270° 15° 70 50 60° 360°(DC) 60 0 0 50 100 150 Average On-State Current - It(av) - Amperes 200 250 0 50 100 150 200 Average On-State Current - It(av) - Amperes Revision Date: 08/31/2011 250