CD41__99B, CN41__99B CS41__99B POW-R-BLOKTM Dual & Single Diode Isolated Module 100 Amperes / Up to 1600 Volts Powerex, Inc., 173 Pavilion Lane, Youngwood, PA 15697 (724) 925-7272 www.pwrx.com Description: OUTLINE DRAWING Powerex Dual Diode & Single Diode Modules are designed for use in applications requiring rectification and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. POW-R-BLOKTM has been tested and recognized by the Underwriters Laboratories. A C F G H 1 2 3 T B "U" THREAD Features: M D Electrically Isolated Heatsinking DBC Alumina (Al2O3) Insulator Copper Baseplate Low Thermal Impedance for Improved Current Capability UL Recognized (E78240) P N 1 - 2 Benefits: 3 2 + CS41 -3 2 + CN41 ~ + 1 + CD41 CD41__99B, CN41__99B CS41__99B Dual & Single Diode Isolated POW-R-BLOKTM Module 100 Amperes / Up to 1600 Volts 3 CONNECTION DIAGRAMS Ordering Information: Select the complete nine digit module part number from the table below. Example: CD411699B is a 1600 Volt, 100 Ampere Dual Diode Isolated POW-R-BLOKTM Module Outline Dimensions Dimension Inches Millimeters A 3.66 93 B 0.79 20 C 3.15 80 D 1.18 30 F 0.61 15.5 G 0.79 20 H 0.79 20 M 1.16 29.4 N 0.31 8 P 0.94 24 T 0.25 6.4 U M5 M5 Type CD41 CN41 CS41 Voltage Current Volts Amperes (x100) 08 12 14 16 99 (100 A) Version B No Additional Insulation Components Required Easy Installation No Clamping Components Required Reduce Engineering Time Applications: Power Supplies Bridge Circuits AC & DC Motor Drives Battery Supplies Large IGBT Circuit Front Ends Lighting Control Heat & Temperature Control Welders Note: Dimensions are for reference only. Revision Date: 04/18/2011 CD41__99B, CN41__99B CS41__99B Powerex, Inc., 173 Pavilion Lane, Youngwood, PA 15697 (724) 925-7272 www.pwrx.com POW-R-BLOKTM Dual & Single Diode Isolated Module 100 Amperes / Up to 1600 Volts Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Reverse Blocking Voltage VRRM up to 1600 V Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) RMS Forward Current VRSM VRRM + 100 V DC Conduction, TC=90°C IF(RMS) 157 A 180° Conduction, TC=100°C IF(AV) 100 A 60 Hz, 100% VRRM reapplied, TJ = 150°C 60 Hz, No VRRM reapplied, TJ = 150°C 50 Hz, 100% VRRM reapplied, TJ = 150°C 50 Hz, No VRRM reapplied, TJ = 150°C 8.3 ms, 100% VRRM reapplied, TJ = 150°C 8.3 ms, No VRRM reapplied, TJ = 150°C 10 ms, 100% VRRM reapplied, TJ = 150°C 10 ms, No VRRM reapplied, TJ = 150°C Operating Temperature IFSM IFSM IFSM IFSM 2 It 2 It 2 It 2 It TJ 1,780 2,110 1,700 2,020 13,190 18,650 14,450 20,430 -40 to +150 A A A A 2 A sec 2 A sec 2 A sec 2 A sec °C Storage Temperature Tstg Average Forward Current Peak One Cycle Surge Current, Non-Repetitive 2 I t for Fusing for One Cycle -40 to +150 °C Max. Mounting Torque, M6 Mounting Screw on Terminals 25 3 in. – Lb. Nm Max. Mounting Torque, Module to Heatsink 44 5 95 in. – Lb. Nm g 3.35 Oz 3500 V Module Weight, Typical V Isolation @ 25C 50-60 Hz, 1 second Vrms Circuit To Base, All Terminals Shorted Together Information is based upon manufacturers testing and projected capabilities. This information is subject to change without notice. The manufacturer makes no claim as to suitability for use, reliability, capability, or future availability of this product. Revision Date: 04/18/2011 CD41__99B, CN41__99B CS41__99B POW-R-BLOKTM Dual & Single Diode Isolated Module 100 Amperes / Up to 1600 Volts Powerex, Inc., 173 Pavilion Lane, Youngwood, PA 15697 (724) 925-7272 www.pwrx.com Electrical Characteristics, TJ=25°C unless otherwise specified Characteristics Symbol Test Conditions Repetitive Peak Reverse Leakage Current IRRM Up to 1800V, TJ=150°C 10 mA Peak On-State Voltage VFM TJ=25°C, IFM=300A, 180° Conduction 1.35 V V(FO)1 rT1 TJ = 150°C, I = 16.7% x IF(AV) to IF(AV) 0.85 1.3 V mΩ Threshold Voltage, Low-level Slope Resistance, Low-level Min. Max. Units Thermal Characteristics Characteristics Max. Units Thermal Resistance, Junction to Case Symbol RΘJ-C Per Module, both conducting Per Junction, both conducting 0.175 0.35 °C/W °C/W Thermal Resistance, Case to Sink Lubricated RΘC-S Per Module 0.1 °C/W Revision Date: 04/18/2011 CD41__99B, CN41__99B CS41__99B POW-R-BLOKTM Dual & Single Diode Isolated Module 100 Amperes / Up to 1600 Volts Powerex, Inc., 173 Pavilion Lane, Youngwood, PA 15697 (724) 925-7272 www.pwrx.com Maximum Transient Thermal Impedance Maximum On-State Forward Voltage Drop ( Tj = 150 °C ) (Junction to Case) 0.40 3 0.35 Thermal Impedance - Rjc - °C/W On-State Voltage - Vfm - Volts 2.5 2 1.5 1 0.5 0.30 0.25 0.20 0.15 0.10 0.05 0 10 100 0.00 0.001 1000 0.01 0.1 Instantaneous On-State Current - Ifm - Amperes 100 (Sinusoidal Waveform) (Sinusoidal Waveform) 130 150 120 145 120° 110 180° 90° 100 Max. Case Temperature - Tcase -°C Max. Power Dissipation Per Diode - Watts 10 Maximum Allowable Case Temperature Maximum On-State Power Dissipation 60° 90 80 30° 70 60 50 40 180 0 30 360 CONDUCTION ANGLE 20 140 135 180 0 130 360 CONDUCTION ANGLE 125 120 115 110 30° 60° 105 10 90° 180° 120° 100 0 0 10 20 30 40 50 60 70 80 90 0 100 10 20 30 40 50 60 70 80 90 100 Average On-State Current - If(av) - Amperes Average On-State Current - If(av) - Amperes Maximum On-State Power Dissipation Maximum Allowable Case Temperature (Rectangular Waveform) (Rectangular Waveform) 180 150 360° 160 145 270° 140 Max. Case Temperature - Tcase -°C Max. Power Dissipation Per Diode - Watts 1 Time - t - Seconds 180° 120° 120 60° 100 90° 30° 80 60 40 180 0 360 CONDUCTION ANGLE 20 140 135 180 0 130 360 CONDUCTION ANGLE 125 120 115 110 30° 105 60° 100 90° 120° 95 360° 180° 270° 90 0 0 20 40 60 80 100 120 Average On-State Current - If(av) - Amperes 140 160 0 20 40 60 80 100 120 140 160 Average On-State Current - If(av) - Amperes Revision Date: 04/18/2011