bi441 short form 2007 dev.qxd 14 6/26/07 8:59 AM Page 14 Fixed Resistors Thick Film Chip Resistor Arrays Resistor Arrays Model BCN 10 4 BCN 16 4 BCN 16 8 Industrial Style, Inches (mm) 0804 (2010) 1206 (3216) 1206 (3216) Standard Resistance Range, Ohms 10 to 1 Meg 10 to 1 Meg 100 to 1 Meg Standard Resistance Tolerance (%) ±5 ±1, ±2, ±5 ±5 Temp. Coefficient of Resistance, ppm/°C ±250 ±250 ±200 Operation voltage 25Vdc 50Vdc 25Vdc Power Rating at 25°C per Resistor per Package 31mW 125mW 63mW 250mW 32mW 250mW Capacitance Range, pF (at 1Khz) Capacitor Characteristic Capacitor Tolerance Capacitor Voltage Rating Capacitor Dissipation Factor, Maximum Dielectric Withstanding Voltage, 50mA Chrg. Operating Temperature -55°C to +125°C -55°C to +125°C -55°C to +125°C Termination Options Convex Convex/Concave Convex Edge Options Square Square/Scalloped Square Paper: 10K Paper: 40K Paper: 5K Paper: 20K Paper: 5K Paper: 20K Packaging Options (Quantity/Reel) Tape & Reel: 7” Tape & Reel: 13” Surge Capability Short Term Overload Specifications subject to change without notice. Consult factory for custom products Also available BCN and BSR jumpers All BCN chip arrays are RoHS compliant Ordering Information BCN BCN BCN 16 4 A B I 102 J 7 Model Series Packaging Package Option: (see Table A) Width: 10 = 1.0mm 16 = 1.6mm 21 = 2.1mm 31 = 3.1mm 7" Reel Diameter 13" Reel Diameter Tolerance: F = ±1% (BCN 4D, BCN 16 4, BCN 31 8RB/8SB only) G = ±2% (BCN 16 4, BCN 31 8RB/8SB only) J = ±5% (Standard) (Use JP for Jumper Chip Array, BNC16 4, BNC 31) No of Resistors: BCN 10 = 4 Resistors BCN 16 = 4A Resistors BCN 16 8R or 8S = 8 Resistors BCN 21 = 8 Resistors BCN 31 8R or 8S = 8 Resistors Circuit Configuration: A = Isolated (BCN 10, BCN 16 4A) R = Bussed (Reversed) (BCN 16, 8R or BCN 31 8R) S = Bussed (Standard) (BCN 16 8S or BCN 21 8S) Paper BCN 10 5k 5k BCN 21 4k 16k Termination Code: I = Interior (concave) Termination No code used for exterior termination (Standard) All interior terminations require ‘B’ for square edge (BCN 16 4ABI, BCN 31 8RBI, BCn 31 8SBI) BCN 31 4k 16k BCN 16 8S & BCN 31 8S BCN 21 R2 R3 BCN 31 Ladder R R4 www.bitechnologies.com 20k See ‘Model Styles’ for Available Options: Note: Tape & Reel dimensions per EIA-481. 2R R R R1 20k Embossed BCN 16 8 BCN BCN 2D 40k BCN 16 4 Schematics R1 = R2 . . . Rn (n = 2,4) Paper Resistance Code: 3 Digits for E6, E12, E24 series, all tolerances 4 Digits for E96 series, 1% tolerance Edge Option: (B = Square edge) Scalloped Edge - No code used (Standard) Square Edge Only - Use Code 'B' BCN 10, & BCN 16 4 Embossed 10k 2R 2R 2R R R 2R 2R R 2R R 2R 2R bi441 short form 2007 dev.qxd 6/26/07 8:59 AM Page 15 15 Fixed Resistors Resistors Capacitor Networks Surge Resistors BCN 21 8 BCN 31 8 BCN 31 Ladder RC4 RC6 BSR Surge Resistors 1608 (4021) 2512 (6531) 2512 (6531) 206 (3216) 2512 (6531) 2512” (6531mm) 68 to 200K 22 to 1 Meg 1K to 100K 10 to 1 Meg 10 to 1 Meg 0.050 to 100K ±5 ±1, ±2, ±5 ±2 ±20 ±20 ±1, ±2, ±5, ±10, ±20 ±200 ±200 ±200 ±200 25Vdc 50Vdc 50Vdc 50Vdc 50Vdc 100Vdc 63mW 500mW 63mW 500mW 25mW 400mW 63mW 63mW 1W 2 W/Pkg. ±100ppm for values above 1W 10 to 220 10 to 220 X7R X7R 20% 20% 50 50 2.50% 2.50% 125Vdc, 5 sec. 125Vdc, 5 sec. 55°C to +125°C -55°C to +125°C -40°C to +125°C Concave Convex/Concave Convex -55°C to +125°C Convex -55°C to +125°C Square Square Square Square Embossed: 4K Embossed: 16K Embossed: 4K Embossed: 16K Embossed: 4K Embossed: 16K Paper: 5K Paper: 20K -55°C to +125°C Embossed: 4K Embossed: 16K Embossed: 4K 1.2/50µs, 250V; 10/700µs, 250V 2.5 x Rated Voltage All BCN and RC parts are RoHS Compliant Schematics Ordering Information BSR RC4 BSR BSR 1 120 J E Model Series R2 Resistance Code: First 2 Digits are significant last digit denotes No of trailing zeros Packing option E = Embossed Tape Resistance Tolerance: F = ±1% G = ±2% J = ±5% K = ±10% M = ±20% RC6 RC4/RC6 Circuit A RC 6 E 101 M 101 M 7 Model Series Circuit B Circuit C 10 9 8 7 6 10 9 8 7 6 10 9 8 7 6 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 10 9 8 7 6 10 9 8 7 6 1 2 3 4 5 1 2 3 4 5 Packaging Option 7 = 7" Tape & Reel 13 = 13" Tape & Reel Size Code 4 = 1206 6 = 2512 Capacitor Tolerance: M = ±20% Circuit D Circuit Type Code used for R6 only refer to curuit schematics Resistance Code 3 digit code in ohms Circuit E Capacitor Code 3 digit code in picofarads Resistance Tolerance J = ±5% (optional) K = ±10% (optional) M = ±20% (standard) www.bitechnologies.com