HM37 Electrical / Environmental • Operating Temperature Range High Current Low Loss Ferrite Cube Inductors -40°C to +130°C S RomHpliant Co Schematic Specifications @ 25°C Part Number HM37-1007R17LF HM37-1007R19LF HM37-1609R32LF Inductance 100 kHz, 0.1 V @ 0 A @ Isat nH ± 10% nH Typ. 170 158 190 180 320 260 Heating Current (1) (Adc) 42 42 48 Isat (2) (Adc) 58 50 50 DCR (mW) ±5% 0.37 0.37 0.47 Notes: (1)The heating current is the DC current which causes the component temperature to increase by approximately 50°C. This current is determined by soldering the component on a typical application PCB, and then applying the current to the device for 30 minutes. (2) The saturation current (Isat) is the approximate current at which inductance will be decreased by 20% from its initial (zero DC) value. Outline Dimensions (mm) Recommended Solder Pad Layout Top View Front View Case Size A B C D 1007 10.0 7.0 9.5 8.5 1609 15.9 8.9 9.2 14.6 Packaging Standard: Vacuum Tray Case Size 1007 1609 28 MAGNETIC COMPONENTS SELECTOR GUIDE 2009/10 EDITION We reserve the right to change specifications without prior notice. Capacity Per Carton (Units) 800 660 www.bitechnologies.com Electrical Characteristics @ 25°C Inductance (nH) Inductance vs. Current Characteristics DC Current (A) % of OCL Inductance Rolloff vs. Current Characteristics DC Current (A) Ordering Information HM37 - 1007 Model Series Case Size : 10 -- (First 2 digits) Length Dimension 07 -- (Last 2 digits) Width Dimension www.bitechnologies.com R17 LF Lead-Free Inductance Code 2009/10 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE We reserve the right to change specifications without prior notice. 29