HM72E-12 - BI Technologies

0
HM72E-12
Electrical / Environmental
High Power High Performance Molded
Surface Mount Inductors
•
•
•
Operating & Storage Temperature
Temperature Rise, Maximum
Operating Frequency
-40°C to +155°C
40°C
Up to 5MHz
Specification @ 25°C
Part Number
Heating
Current(2)
(Adc)
35
32
27
22
18
10
5
Inductance(1)
µH±20%
HM72E-12R68HLF
HM72E-121R0HLF
HM72E-121R5HLF
HM72E-122R2HLF
HM72E-123R3HLF
HM72E-12100HLF
HM72E-12200HLF
0.68
1.00
1.50
2.20
3.30
10.0
20.0
DCR (mΩ)
Isat(3)
(Adc)
Typ.
Max.
35
31
27
24
20
9
8
1.4
1.7
2.5
3.5
5.7
16.4
37.0
1.6
2.0
3.0
4.2
6.8
17.2
40.5
Notes:
(1) Inductance is measured at 100 kHz, 0.1Vac without DC current.
(2) The Heating Current is the approximate DC current which causes the component temperature to
increase by 40°C. This current is determined by soldering the component on a typical application PCB,
and then applying the current to the device for 30 minutes.
(3) The saturation current (Isat) is the approximate current at which the inductance will be decreased by
20% typical from its initial (zero DC) value.
(4) The part temperature (ambient + temperature rise) should not exceed 155°C.
Outline Dimensions (mm)
Top View
Side View
Bottom View
Recommended
PCB layout
MAGNETIC COMPONENTS
We reserve the right to change specifications without prior notice.
Page 1 OF 2
www.bitechnologies.com
Electrical Characteristic @ 25°C (Cont’d)
Packaging / Ordering Information
One reel (13”)
One shipping carton (6 reels)
HM72E
400 pcs
2400 pcs
-
12
R68
LF
TR13
13” tape & reel
packing
Model Series
Case Size
Lead Free
Inductance Code:
First 2 digits are significant. Last digit
denotes number of trailing zeros. For values
below 10µH, “R” denotes the decimal point.
MAGNETIC COMPONENTS
We reserve the right to change specifications without prior notice.
Page 2 OF 2
www.bitechnologies.com
Rev.
A
B
Description of Change
Initial draft release.
Remove draft copy watermark and part number highlights.
Date
8/18/14
10/31/14
MAGNETIC COMPONENTS
We reserve the right to change specifications without prior notice.
Page 3 OF 2
www.bitechnologies.com