CompactPCI Systems 11 CPU Boards MIC-3321 3U CompactPCI® Celeron®/ Pentium® M 1 GHz Controller MIC-3323 3U CompactPCI® Intel® Core™2 Duo 1.6 GHz Controller MIC-3325 3U CompactPCI® Intel® Atom™ Dual Core™ D525/N455 Processor Blade MIC-3392L 6U CompactPCI Intel® Celeron® M Processor Blade MIC-3392Rev2 6U CompactPCI® Intel® Core™2 Duo Processor-based Board with Dual PCIe GbE/DDR2/SATA/PMC MIC-3392MIL 6U CompactPCI Intel Core™2 Duo Rugged Processor Blade MIC-3393 6U CompactPCI® Intel® Xeon® Processor Quad/Dual Core Blade MIC-3395 6U CompactPCI® 2nd and 3rd Generation Intel® Core™ i3/i5/i7 Processor Blade with ECC Support ® ® 11-2 11-4 11-6 11-8 11-10 11-12 11-14 11-16 RTM Boards MIC-3525 3U CompactPCI® Rear Transition Board for MIC-3325 RIO-3310 6U CompactPCI® Rear Transition Boards for MIC-3390 and MIC-3392 RIO-3311 6U CompactPCI® Rear Transition Board for MIC-3393 RIO-3313 6U CompactPCI® Rear Transition Board for MIC-3313 RIO-3315 6U CompactPCI® Rear Transition Board for MIC-3395 RIO-3392MIL 6U CompactPCI® Rear Transition Board for MIC-3392MIL 11-19 11-20 11-22 11-24 11-26 11-27 Peripheral Boards 11-28 11-30 MIC-3312 6U CompactPCI® Extension Board for MIC-3393 MIC-3313 6U CompactPCI® Extension Board for MIC-3393 MIC-3611 MIC-3612 MIC-3620 4-port RS-422/485 3U CompactPCI® Card with Surge and Isolation Protection 4-port RS-232/422/485 3/6U CompactPCI® Card 8-port RS-232 3U CompactPCI® Card 11-32 MIC-3621 MIC-3680 8-port RS-232/422/485 6U CompactPCI® Card with Surge Protection 2-port CAN-bus 3U CompactPCI® Card 11-33 MIC-3666 Dual 10 Gigabit Ethernet XMC 11-34 MIC-3716 MIC-3714 MIC-3723 250 kS/s, 16-bit, 16-ch Multifunction 3U CompactPCI® Card 30 MS/s, 12-bit, Simultaneous 4-ch Analog Input 3U CompactPCI® Card 16-bit, 8-ch Analog Output 3U CompactPCI® Card 11-35 MIC-3753 MIC-3756 MIC-3758 72-ch Digital I/O 3U CompactPCI® Card 64-ch Isolated Digital I/O 3U CompactPCI® Card 128-ch Isolated Digital I/O 3U CompactPCI® Card 11-36 MIC-3761 MIC-3780 8-ch Relay & 8-ch Isolated Digital Input 3U CompactPCI® Card 8-ch, 16-bit Counter/Timer 3U CompactPCI® Card 11-37 MIC-3927 CompactPCI® Intel® ligent Chassis Management Module (PICMG® 2.9) MIC-3951 6U CompactPCI® Dual PMC or CMC Carrier Board (64-bit/66 MHz) MIC-3960 6U CompactPCI® Media Carrier Board MIC-3961 6U CompactPCI® PCI Carrier Board 11-38 11-40 11-41 11-42 Enclosures 11-43 11-44 MIC-3001 4U CompactPCI® Enclosure with 8-slot 3U Backplane MIC-3002A 4U CompactPCI® Enclosure with 6-slot 3U Backplane MIC-3042 4U CompactPCI® Enclosure with cPCI Power Supply (CT Bus non-CT Bus or PICMG 2.16) 11-45 MIC-3043 4U CompactPCI® Enclosure with cPCI Power Supply and Removable HDD Bay (CT Bus or Non-CT Bus) 11-47 To view all of Advantech’s CompactPCI Systems, please visit www.advantech.com/products. MIC-3321 3U CompactPCI® Celeron®/ Pentium® M 1 GHz Controller Features Built-in Intel® Pentium® M 760 2.0 GHz processor with 2 MB L2 Cache Mobile Intel® 915GM express chipset Supports up to 1GB DDR2 533/400 SDRAM soldered on board Extended operating temp: -25 ~ 70° C ( -13 ~ 158° F) (Optional: MIC-3321C only) Dual Giga LAN on PCI-Express High-performance Intel Graphics Media Accelerator 900 VGA display Onboard CompactFlash® disk socket Onboard 2.5" HDD support Rear I/O signal support for easy wiring Introduction The MIC-3321 3U is a CompactPCI system controller board that combines the performance of Intel’s Mobile Pentium M 760 2.0GHz processor with the high integration of the 915GM chipset and the I/O Controller Hub ICH6. The low power of the Intel Mobile Celeron M makes it possible to work with high extended temperature ranges. The directly soldered CPU and memory provides less weight and a higher shock/vibration resistance than socket devices. MIC-3321 is a powerful 3U CompactPCI Controller that fulfills requirements in mission critical applications, such as military defense, transportation, traffic control, test and measurement (T&M) as well as critical data acquisition & control applications. Specifications CPU Chipset BIOS Front Side Bus Bus PCI Bus Memory Graphics Ethernet Serial P-IDE SATA USB PS/2 Watchdog Timer 11-2 MIC-3321: Intel Pentium M 760 2.0 GHz with 2 MB L2 cache MIC-3321C: Intel Celeron M Ultra Low Voltage 373 1.0 GHz with 512 KB L2 cache Intel 915 GM (GMCH) + Intel 82801FBM (ICH6-M) Award 4 MB Flash 533 MHz (Intel Pentium M 760 2.0 GHz CPU) 400 MHz (Intel Celeron M Ultra Low Voltage 373 1.0 GHz CPU) PCI-to-PCI Bridge: PERICOM PI7C8150 7 x 32-bit/33MHz CompactPCI bus Master interface 3.3 V/5 V VIO adjustable Directed Soldered 512 MB DDR2 SDRAM Controller: Intel Graphics Media Accelerator 900 VRAM: DVMT3.0 128MB Resolution: Up to 2048 x 1536 with 32-bit color at 75 Hz Interface: 10/100/1000 Mbps Gigabit Ethernet Controller: 2 x Intel 82573E/L PCI Express Gigabit Ethernet Controller Connector: 2 x RJ-45 Supports Pre-boot Execution Environment (PXE) Interface: RS-232 Controller: 2 x 16C550 Compatible Data Bits: 5, 6, 7, 8 Stop Bits: 1, 1.5, 2 Parity: None, Even, Odd Speed (bps): 50 ~ 115.2K Data Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND Connector: 2 x DB9 male Two as front I/O, one as rear I/O One channel P-IDE Supports PIO mode 4 (16.67MB/s data transfer rate) and ATA 33/66/100 (33/66/100MB/s data transfer rate) 1 x CompactFlash Socket Type II 1 x 44-pin 2.5" HDD connector SATA interface with data transfer rate up to 150MB/s 1 x External SATA connector 4 x USB 2.0 channels up to 480Mbps, 2 as front I/O, 2 as rear I/O PS/2 for keyboard and mouse legacy support 0 ~ 64s, 0.25s step, generate reset signal CompactPCI Systems MIC-3321 Hot Swap 4HP Board Front Panel Functions 8HP Board (Additional to 4HP) Rear I/O via J2 Compliancy Environment Physical Rear Transition Board Operating Temperature Storage Temperature Dimensions (L x H) Weight P/N Width Support for all signals to allow peripheral boards to be hot swapped. The individual clocks for each slot and access to the backplane ENUM# signal comply with the PICMG 2.1 Hot Swap specification. (PCI to PCI bridge GPIO3) 1 x VGA-CRT 15-pin D-SUB connector Ethernet: 1 x RJ-45 connector with integrated LEDs USB: 2 x 4-pin connectors Reset: Reset button, guarded LED: Power, HDD COM1: 1 x DB9 RS-232 connector COM3: 1 x DB9 RS-232 connector PS/2: 1 x PS/2 connector for keyboard and mouse Ethernet: 1 x RJ-45 connector with integrated LEDs 2 x USB 2.0 channels 2 x Gigabit Ethernet channels with LED (shared with front I/O) 1 x COM port 1 x VGA-CRT channel (shared with front I/O) 1 x PS/2 keyboard/mouse channel (shared with front I/O) PICMG 2.0 Rev. 3.0 compatible CompactPCI Hot Swap Specification PICMG 2.1 R2.0 0 ~ 50° C/ 32 ~ 122° F (Pentium M 2.0G / Celeron M 1.0G CPU) -25 ~ 70° C/ -13 ~ 158° F (Optional: Celeron M 1.0G CPU only) MIC-3321 MIC-3321C MIC-3521 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 -40 ~ 80° C/ -40 ~ 176° F 160 x 100 mm (3U) 0.6 kg MIC-3521 8HP Ordering Information Part Number Embedded Box PC Description Pentium M 2.0 GHz, 2MByte L2 cache, 512 MByte soldered DDR2 SDRAM, 8 HP width Celeron M 1.0 GHz, 512KByte L2 cache, 512 MByte soldered DDR2 SDRAM, 8 HP width Rear I/O Transition Board for MIC-3321 series Front View of MIC-3321 & MIC-3521 MIC-3321 Online Download www.advantech.com/products MIC-3521 Intelligent Video Platforms 10 CompactPCI 11 11-3 MIC-3323 3U CompactPCI® Intel® Core™2 Duo/ Atom™ Processor D510 Controller Features Supports two different CPU grades Intel® Core™2 Duo or Atom™ D510 Processor Intel® GME965 GMCH /ICH8M Supports up to 4GB DDR2 533/667 MHz SDRAM Dual Giga LAN ports High-performance Intel 965GME Graphics Media Acclerator Supports SATA 2.5" HDD Introduction The MIC-3323 is a 3U CompactPCI system control board, which supports two different CPU grades; one adopts the high performance Intel Core 2 Duo 1.6 GHz processor and highly integrated Intel 965GM Express chipset; the other one adopts the Intel Atom Processor D510 1.66GHZ and ICH8M chipset. In addition to 4MB L2 Cache, it supports 2GMB DDR2 SDRAM up to 4GMB and dual Gigabit Ethernet. MIC-3323 is a powerful 3U CompactPCI controller that fulfills requirements for mission critical applications, such as military defense, transportation, traffic control, test and measurement (T&M) as well as critical data acquisition & control applications. Specifications CPU L2 Cache Chipset BIOS Front Side Bus BUS PCI Bus Memory Graphic Ethernet Serial SATA USB PS/2 Watchdog Timer Hot-swap Compliance Environment Physical 11-4 Humidity Operating Temp Storage Temp Dimensions (L x H) Weight Intel Core 2 Duo 1.6GHZ/Atom D510 1.66 GHZ(Note 1) 4 MB L2 Cache/1MB L2Cache Intel 965GM GMCH/ICH8 AWARD 4 M-bit /AMI 16Mbit Flash BIOS 533MHZ (Intel Core 2 Duo 1.6 GHz CPU) 667MHZ (Intel Atom D510 1.66 GHZ CPU) PCI-PCI bridge PERICOM PI7C8150 7 x 32 bit/33 MHz Compact PCI bus master interface 3.3V VIO SDRAM, DDR2 533/667 MHz Support 2G (Note 2) Socket: 2 x 200-pin SODIMM sockets Chipset: Intergated Intel 965GME Chipset/Intel Atom D510 Resolution: Up to 1920 x 1024 Interface: 1000/100/10Mbps Gigabit Ethernet Controller: PCI-Express×1 Intel@82574E Ethernet Controller Connector: RJ-45*2 Interface: RS-232 UART: 3 x 16C550 compatible Data bits: 5,6,7,8 Stop Bits: 1,1.5,2 Parity: None, Even, Odd Speed: 50~115.2Kbps Data Signal: TXD,RXD,RTS,CTS,DTR,DSR,DCD,RI GND Connector: 2 X DB-9 1 X SATA interface, data transfer rate up to 300 MB/S (Note 3) 2 x USB 2.0 channels up to 480 Mbps Keyboard and mouse 256-level timer interval, from 0 to 255 sec or min; setup by software; jumperless selection; generates system reset Supports all signals to allow peripheral boards to be hot swapped PICMG®2.0 Rev.3.0 Compatible Compact PCI Hot-swap PICMG®2.1 Rev.2.0 5~95% (non-condensing) 0 ~ 50°C (32 ~ 122°F) -40~80°C (-40~176°F) 160 X 100mm (6.30" x 3.94") (3U) 0.8 kg CompactPCI Systems MIC-3323 Frontpanel Function (8HP) COM1/3: 2 x DB9,RS-232 PS/2: 1 for keyboard and mouse Ethernet: 2 x RJ-45 connector with LED VGA: 1 x15 pin D-SUB connector USB: 2 x USB 2.0,4-pin connector Button: Reset Button LED: Power, HDD Note 1: Select different CPU grade by order number Note 2: Supports 2GB, up to 4GB Note 3: Support SATA or CF Card by order number MIC-3323D01-D23E Description 3U CompactPCI Intel Core 2 Duo 1.6 GHz Controller with SATA HDD/8HP 3U CompactPCI Intel Atom D510 1.66 G Controller with SATA HDD/8HP Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 CompactPCI R COM3 MIC-3323D01-A33E 1 Front View of MIC-3323 Ordering Information Part Number Embedded Box PC PWR Reset HDD USB1 USB2 COM1 VGA PS2 LAN1 LAN2 Online Download www.advantech.com/products Intelligent Video Platforms 10 CompactPCI 11 11-5 MIC-3325 3U CompactPCI® Intel® AtomTM Dual Core D525/N455 Processor Blade Features NEW Dual Core Intel® AtomTM D525 processor/single core N455 processor Intel® I/O Controller Hub 8-Mobile (ICH8M) 2 GB DDR3 onboard up to 800 MT/s Optimized CompactFlash socket on single board computer 2.5" SATA-II HDD on XTM second layer Two 10/100/1000 Mbps ports, two USB ports,1 VGA port on front panel Two COM ports,1 USB ports,1 PS/2 port on 8HP second layer PICMG 2.0, R 3.0, PICMG 2.1, R 2.0 compliant RoHS COMPLIANT 2002/95/EC Introduction Advantech’s MIC-3325 is a 3U CompactPCI dual/single core processor blade based on the Intel® Atom™ processor D525/N455+ICH8M two-chip platform. It provides the high performance of 2 cores and 4 threads of processing power at lower cost, and with easier validation. The MIC-3325 fully utilizes the I/O features of the Intel® chipsets, including an integrated memory controller (IMC), integrated graphics processing unit (GPU) and integrated I/O (IIO) such as DMI. The low power requirements of the Intel® Atom™ processor makes operation in elevated temperature ranges possible. Breakthrough memory design puts 2GB SDRAM on board, while keeping the speed at DDR3 800MT/s. The on-board CPU and memory provide less weight and higher shock/vibration resistance than socket devices. With such benefits, the MIC-3325 can be used in mission-critical applications such as military defense, transportation, traffic control, test and measurement (T&M) as well as critical data acquisition & control applications. MIC-3325 uses the Intel® ICH8M as the PCH, which provides extensive I/O support. The Integrated Gigabit Ethernet Controller can operate at multiple speeds (10/100/1000 Mb/s) and in either full duplex or half duplex mode. A flexible 8HP extension module design provides the MIC-3325 with great flexibility and additional I/O connectivity to the customer. For more connectivity details, please contact an Advantech representative. Specifications CPU Processor System CompactPCI Interface Memory Graphics Ethernet Storage Front I/O 11-6 Max. Speed Chipset BIOS DMI J1 Connector J2 Connector Technology Max. Capacity On board/socket Chipset Resolution Controller Interface I/O Connector Controller Interface I/O Connector IDE SATA VGA Ethernet USB 2.0 LEDs 8HP-option A CompactPCI Systems Intel Atom N455 Single Core 1.66 GHz Intel Atom D525 Dual Core 1.8 GHz 1.8 GHz Intel ICH8M @ Pine View-D Platform SPI 2-MByte BIOS 100 MHz reference clock 32-bit PCI local bus (33MHz) RTM area DDR3-800 SDRAM 2 GB On board Integrated in Intel Atom N455/D525 Intel Atom N455 Single Core up to 1400 x 1050 (SXGA) Intel Atom D525 Dual Core up to 2048 x 1536 2Xi82583V 10/100/1000 Mbps RJ-45 x 1 (front panel), RJ-45 x 1 (RTM) ICH8M (MAC)+82567 (PHY) 10/100/1000 Mbps RJ-45 x 1 (front panel) 1 x CompactFlash Socket Type II 1 x Internal SATA connector only on 8HP version DB15 Port 2 x 10/100/1000 Mbps RJ-45 connector 2 x Type A ports Power, Hot Swap 2 x DB9 RS-232, 1 x USB Type A port, 1 x PS/2 port MIC-3325 Specifications (Cont.) SATA VGA COM USB 2.0 RJ-45 1 SATA-II (internal) 1 port 2 ports (internal) 2 ports 1 PCIex1 based on i82583V MAC/PHY Supervision Compatibility Configuration Consumption Dimensions (W x D) Weight Environment Temperature Humidity Shock Vibration 0 ~ 255s, 1s step, generate reset signal Microsoft Windows XP Professional, Windows 7, Windows XPE, Redhat6.1, VxWorks 4HP, w/o RIO 16.6 W for D525,14.6 W for N455 (4HP with peripherals) 4HP, 160.00 x 100.00 mm (6.30" x 3.95") (PCB size) 0.4 kg including XTM Operating Non-operating 0 ~ 60° C (32 ~ 140° F) -40 ~ 85° C (-40 ~ 185° F) 5 to 95% @ 40°C (non condensing) 95% @ 60° C (non-condensing) 10 G, 11ms 30 G, 11ms 1.06 Grms (5 ~ 100 Hz, without on-board HDD) 2 Grms (5 ~ 500 Hz) Regulatory Compliance Conformance Standard FCC, Class A, CE, RoHS PICMG 2.0 Rev. 3.0 compatible; PICMG 2.1 R2.0 CompactPCI Hot Swap Specification RIO (J2 interface) Watchdog Timer Operating System Power Requirement Physical Characteristics Ordering Information Part Number MIC-3325D-S1E MIC-3325D-D1E MIC-3325N-S1E MIC-3325N-D1E MIC-3325XTM-S1E Description MIC-3325 with D525 CPU 2G RAM single slot MIC-3325 with D525 CPU 2G RAM dual slot MIC-3325 with N455 CPU 2G RAM single slot MIC-3325 with N455 CPU 2G RAM dual slot 3U CPCI Extension Board for MIC-3325 Optional Accessories Part Number MIC-3525-S1E MIC-3611/3-AE MIC-3716/3-A MIC-3756/3-A MIC-3680/3-A Description Rear I/O for MIC-3325 with VGA, LAN, USB, SATA, COM 4-port RS-232/422/485 3U 250kS/s,16-bit,16-ch multifunction Card 64-ch Isolated DI/O Card 2-port CAN Card Online Download www.advantech.com/products Embedded Box PC 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 Intelligent Video Platforms 10 CompactPCI 11 11-7 MIC-3392L 6U CompactPCI Intel® Celeron® M Processor Blade Features Supports Intel® Celeron® M 440 processor Intel® 945GME chipset supports 533/667 MHz FSB Up to 2 GB (DDR2 533/667) memory with SODIMM expansion Comprehensive I/O capability, dual Gigabit Ethernet, SATA, CompactFlash One 64-bit/66 MHz PMC expansion slot PICMG 2.16, R1.0 Packet Switching Backplane Specification compliant PICMG 2.9, R1.0 IPMI Specification compliant PICMG 2.1, R2.0 Hot-Swap Specification compliant Selectable System/Peripheral mode RoHS COMPLIANT 2002/95/EC Introduction The MIC-3392L is a full featured, but cost optimized CompactPCI CPU card ideally suited for cost sensitive control plane applications. It is built on Advantech’s proven MIC-3392 Core design using Intel®'s 945 chipset for supporting high speed DDR2 onboard / pluggable memory, integrated graphics and standard I/Os such as onboard CompactFlash and 2.5” SATA HDDs. Dual GbE front ports and PICMG2.16 support give it the right connectivity for Computer Telephony, IPTV, Satellite and High Performance applications such as radar, imaging, instrumentation, communications, telephony and industrial control. Additional flexibility is achieved through the onboard PMC socket, which can host additional Ethernet ports using Advantech’s MIC-3665 PMC or other I/Os based on third party PMCs. A choice of Advantech’s rear transition modules complements the MIC-3392L to provide additional connectivity and I/O. Specifications Processor System Bus Memory CPU (Included) Chipset BIOS Front Side Bus PCI Technology Max. Capacity Socket Graphics Ethernet Storage Bridge I/O Interface Operating System Hardware Monitor Watchdog Timer PMC Miscellaneous 11-8 Controller VRAM Resolution Interface Controller I/O Connector Mode Channel Storage Site Bus Interface Serial (COM1) Compatibility Controller Monitor Output Interval Site Interface Signal Solid State Disk LEDs USB 2.0 Real Time Clock CompactPCI Systems Intel Celeron M 440 Processor,1.86 GHz, 1 MB L2 cache Intel 945GME/ICH7M AMI 8 Mbit flash 533 MHz Up to 64-bit/66 MHz DDR2 533/667 MHz 2 GB SODIMM x 1 1 GB memory integrated on board Intel 945GME integrated Dynamic Up to 2048 x 1536, 64k color at 75 Hz 10/100/1000 Mbps Ethernet Intel 82573E x 2 RJ-45 x 2 (front) SATA 2 One SATA connector and space reserved for embedded 2.5" HDD PCI 64-bit/66 MHz Universal (system/peripheral mode capability) RJ-45 x 1 (front) Windows XP/2000, Linux Winbond 83627DHG CPU temperature, +3.3V, +5V, +12V System reset Programmable, 0 ~ 255 sec. 1 IEEE1386.1 64-bit/66 MHz +5V/+3.3V compliant One CompactFlash socket HDD, Power, Hot Swap, system/peripheral, BMC Heartbeat 2 channels Built-in to South Bridge MIC-3392L Specifications (Cont.) Power Requirement TDP Dimensions (W x D) Weight Physical Characteristics Max. 44 watts 233.35 x 160 mm (9.19" x 6.3"), 1-slot width 0.8 kg (1.76lb) Operating (by screening service) Non-operating 0 ~ 55° C (32 ~ 122° F) -20 ~ 60° C (-4 ~ -140° F) 95 %@ 60° C (non-condensing) 20 G 50 G 1.5 Grms 2.0G 4,000m above sea level FCC Class A, CE, RoHS Designed for GR-63-Core and GR-1089-Core PICMG 2.0, R3.0 CompactPCI Specification PICMG 2.1, R2.0 Hot-Swap Specification PICMG2.9, R1.0 IPMI Specification PICMG2.16, R1.0 Packet Switching Backplane Specification Temperature Humidity Shock Vibration (5-500 Hz) Altitude Conformance NEBS Level 3 Environment Regulatory Compliance Standards Recommended Configurations CPU Board MIC-3392LE PMC Module MIC-3665-AE, MIC-3665-BE Rear I/O Board RIO-3310AE, RIO-3310S-A1E, RIO-3310S-A2E Enclosure MIC-3042, MIC-3043 Ordering Information Part Number MIC-3392LE 2.5" HDD mounting site Front Panel I/O On-Board Option LAN COM PMC USB VGA CPU Memory CF socket 2 1 1 2 1 Celeron M 440 1 GB 1 CompactFlash socket Storage Channel 1 Slot Width 1 Embedded Box PC 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 Intelligent Video Platforms 10 CompactPCI 11 VGA port USB ports x 2 Memory DIMM socket PMC knockout RJ-45 Gigabit LAN ports x 2 Passive CPU heatsink Online Download www.advantech.com/products RJ-45 COM1 port 11-9 MIC-3392Rev2 6U CompactPCI® Intel® Core™2 Duo Processor-based Board with Dual PCIe GbE/DDR2/SATA/PMC Features Supports Intel® Core™2 Duo processor Intel® 945GME chipset supports 533/667 MHz FSB Up to 3 GB (DDR2 533/667) memory with SODIMM expansion Comprehensive I/O capability, dual Gigabit Ethernet, SATA, CompactFlash One 64-bit/66 MHz PMC expansion slot, and optional second 64-bit/66 MHz PMC expansion slot PICMG 2.16, R1.0 packet switching backplane specification compliant PICMG 2.9, R1.0 IPMI specification compliant PICMG 2.1, R2.0 hot-swap specification compliant Selectable System/Peripheral mode RoHS COMPLIANT 2002/95/EC Introduction The MIC-3392 is a high performance, power efficient CompactPCI single board computer based on the Intel® Core™2 Duo processor. It combines the benefits of two execution cores with Intel® intelligent power management features to deliver significantly greater performance per watt over previous Intel processors. The two execution cores share a poweroptimized 667 MHz front side bus to access the same system memory. To save power, address and data buffers are turned off when there is no activity. The MIC-3392 uses PCI Express (PCIe) technology to maximize I/O throughput. It supports up to 3 GB of 667 MHz DDR2 RAM (6.4 GB/s throughput), an onboard 2.5" Serial ATA HDD and a CompactFlash slot. Two front-accessible PCI Express (PCIe) Gigabit Ethernet (GbE) ports provide a bidirectional bandwidth of 2 Gb/s. In addition, the MIC-3392 supports Rear Transition Boards and PCI Mezzanine Cards for further expansion options. Specifications CPU (Not Included) Processor System Bus Memory Max. Speed Chipset BIOS Front Side Bus PCI Technology Max. Capacity Socket Graphics Ethernet Storage Bridge I/O Interface Operating System Hardware Monitor Watchdog Timer PMC Controller VRAM Resolution Interface Controller I/O Connector Mode Channels Storage Site Bus Interface Serial (COM1) Compatibility Controller Monitor Output Interval Site Interface Signal 11-10 CompactPCI Systems Intel Core 2 Duo T7400, Core Duo T2500, Celeron 530 or Celeron M 440 processor (Enclosure with forced air cooling is required) 2.16 GHz (up to 4 MB L2 cache) Intel 945GME AMI 8 M-bit flash 533/667 MHz Up to 64-bit/100 MHz DDR2 533/667 SDRAM 3 GB SODIMM x 1 1 GB/ 2 GB memory integrated on board Intel 945GME integrated Dynamic Up to 2048 x 1536, 64k color at 75 Hz 10/100/1000 Mbps Ethernet Intel 82573E x 2 RJ-45 x 2 (front) SATA 1 One SATA connector and space reserved for embedded 2.5" HDD PCI 64-bit/66 MHz Universal (System/Peripheral mode capability) RJ-45 x 1 (front) Windows Vista/XP/2000, Linux Winbond W83627DHG CPU temperature, +3.3 V, +5 V, +12 V System reset Programmable, 0 ~ 255 sec. 1 or 2 IEEE1386.1 64-bit/66 MHz on A version PMC1 and PMC2 are 64-bit/66 MHz on B version +5 V/+3.3 V compliant MIC-3392Rev2 Specifications (Cont.) Solid State Disk LEDs USB 2.0 Real Time Clock Voltage Typical Maximum Dimensions (W x D) Weight Miscellaneous Power Requirement (Intel Core 2 Duo 2 GHz with 2 GB memory) Physical Characteristics One CompactFlash socket HDD, Power, Hot Swap, system/peripheral 2 channels Built-in to the South Bridge +3.3 V +5 V +12 V -12 V 2.66 A 3.04 A 0.39 A 0A 3.17 A 7.16 A 0.40 A 0A 233.35 x 160 mm (9.19" x 6.3"), 1-slot width 0.8 kg (1.76 lb) Operating Non-Operating 0 ~ 60° C (32 ~ 140° F) -20 ~ 60° C (-4 ~ -140° F) 95% @ 60° C (non-condensing) 5 ~ 500 Hz 1.5 Grms (without on-bard HDD) 5 ~ 500 Hz, 3.5 Grms 4000 m above sea level FCC Class A, CE Design for GR-63-Core & GR-1089-Core PICMG 2.0, R3.0 CompactPCI Specification PICMG 2.1, R2.0 Hot-Swap Specification PICMG 2.9, R1.0 IPMI Specification PICMG 2.16, R1.0 Packet Switching Backplane Specification Temperature * Humidity Vibration Altitude Conformance NEBS Level 3 Environment Regulatory Compliance Standard *Note: Optional large heatsink available but only adapted to single PMC model. Please contact your local distributor for ordering information. Recommended Configurations CPU Board PMC Module MIC-3392A2-MxE, MIC-3392B2-MxE MIC-3665-AE, MIC-3665-BE Rear I/O Board RIO-3310AE, RIO-3310S-A1E, RIO-3310S-A2E Enclosure MIC-3042, MIC-3043 Rear Transition Board Rear Panel Part KB & Mouse COM2 * GbE LAN VGA USB RIO-3310S-A1E 1 1 2 1 1 RIO-3310S-A2E 1 1 2 1 1 RIO-3310AE 1 1 2 1 1 *Note: Optional 3rd LAN port occupies the rear COM2 port **Note: Internal Ultra 320 SCSI port with optional external rear I/O port 10/100 Mbps LAN 1 1 1 SCSI ** IDE 1 - 1 1 1 Onboard Header/Socket/Connector Slot SATA FDD SCSI** PRT USB Width 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Embedded Box PC 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 Intelligent Video Platforms 10 CompactPCI 11 Conn. J3/J5 J3/J5 J3/J5 Ordering Information Model Number MIC-3392A2-M1E MIC-3392A2-M2E MIC-3392B2-M1E MIC-3392B2-M2E Front Panel I/O LAN COM PMC USB VGA CPU 2 2 1 1 1 1 1 1 1 1 2 2 2 2 - 1 1 - - Main Onboard Features Storage Memory CF Socket Channel 1 GB 1 1 2 GB 1 1 1 GB 1 1 2 GB 1 1 Slot Width 1 1 1 1 One CompactFlash socket Memory DIMM socket Two PMC knockouts One passive CPU heatsink One RJ-45 COM1 port One RJ-45 Gigabit LAN port Note: These pictures are based on the "MIC-3392B2-M1E" model. Online Download www.advantech.com/products 11-11 MIC-3392MIL 6U CompactPCI® Intel® Core™2 Duo Rugged Processor Blade Features Supports Intel® Core™ Duo Low Voltage or Core™2 Duo Ultra Low Voltage mobile processor Intel® 945GME chipset supports 533/667 MHz FSB Up to 3 GB (DDR2 533/667) memory with SODIMM expansion Conduction cooled with ANSI/VITA30.1-2002 compliancy Pre-heat circuitry for reliable cold-booting in low temperature environment, or optional support for IPMI v1.5 without pre-heat Boot from network, Compact Flash, or local 2.5" SATA HDD Four GbE ports, two USB 2.0 ports, two DVI-I ports, one P/S2 port, and one COM interface to the Rear Transition Module Optional one VGA port and two USB 2.0 ports to front panel Optional conformal coating and SODIMM gluing service PICMG 2.16 R1.0, PICMG 2.1 R2.0, PICMG 2.6 R1.0 compliant RoHS COMPLIANT 2002/95/EC Introduction MIC-3392MIL, a CompactPCI PICMG 2.16 compliant single slot 6 U CPU board, comes with three different configurations that meet a wide range of environmental requirements for ruggedized applications. Based on the Intel® Core™ Duo LV or Core 2 Duo ULV processor, it offers a low power dissipation design without the need of on-board forced ventilation. Ruggedized requirements are addressed by a conduction cooled design and extended operating temperature range (-40° C ~ 70° C). Shock and vibration resistances of the board are increased by using wedge locks and a single-piece CNC-milled aluminum alloy plate that conforms to the major IC packages. With highly integrated functional capabilities, the MIC-3392MIL fully utilizes the I/O features of the Intel chipsets. It supports up to 3 GB of 667 MHz DDR2 RAM, an onboard 2.5" Serial ATA HDD, a CompactFlash slot, and a set of I/O functions brought through the backplane to a unique rear transition module, which contains four LAN ports, two DVI-I ports, two USB 2.0 ports, one P/S2 port, and one RS-232 port on the panel. Specifications Processor System CompactPCI Interface PCI-X to cPCI Bridge Bus Memory CPU Chipset BIOS J1 Connector J2 Connector J3~J5 Connectors Controller Interface Front Side Bus PCI Technology Max. Capacity Socket Graphics Ethernet Storage Controller VRAM Resolution Controller Interface I/O Connector Controller Interface I/O Connector Mode Channel Storage Site Mode Channel Storage Site 11-12 CompactPCI Systems Intel Core 2 Duo ULV or Core Duo LV up to 1.6 GHz (2 MB L2 cache) Intel 945GME/ICH7M Award 4Mb flash 32-bit PCI local bus 64-bit PCI local bus PICMG2.16 + RTM area PLX PCI 6540CB Master/Drone 533/667 MHz Up to 64-bit/66 MHz DDR2 533/667 MHz 3 GB SODIMM x1 2 GB memory integrated on board Intel 945GME integrated Dynamic Up to 2048 x 1536, 64k color at 75 Hz Intel 82571EB dual-port Gigabit Ethernet controller 10/100/1000 Mbps Ethernet (on PCIe x4 channel) PICMG2.16 and RJ-45 x2 (RTM rear panel) Intel 82546GB dual-port Gigabit Ethernet controller 10/100/1000 Mbps Ethernet (on PCI 32bits/33Mhz) RJ-45 x 2 (RTM rear panel) SATA 2 interfaces to CompactPCI connector 1 SATA connector and space reserved for a 2.5" HDD on one of the two channels (optional for non-conduction cooled product configuration) IDE 1 interface to CompactPCI connector 1 on-board CompactFlash socket on the same channel MIC-3392MIL Specifications (Cont.) Hardware Monitor USB 2.0 DVI-I Serial Parallel, FDD, PS2 Output Interval Controller BMC Controller Operating System Compatibility Front Panel LEDs (standard cPCI SKU only) Configuration TDP Dimensions (W x D) Expansion I/O Watchdog Timer Miscellaneous Power Requirement Physical Characteristics 2 host ports (std. USB connectors) on front panel and 4 host interfaces to cPCI connectors 2 interfaces to CompactPCI connector 3 interfaces to CompactPCI connector (1 reserved for BMC IPMI F/W update) Each with 1 interface to CompactPCI connector Local Rest and Interrupt Programmable 1s ~ 255s Winbond 83627HG Renesas H8S 2167, IPMIv1.5 compliant for standard CompactPCI SKU/Pre-heat F/W for conduction-cool SKU, mutually exclusive Windows XP/2000, Linux, VxWorks 6.4 (on request) Conduction cooled SKU (with Intel U7500 processor) 37 watts (thermal model available on request) 233.35 x 160 mm (9.19" x 6.3") Operating Non-operating 0 ~ 70° C (std CompactPCI SKU) -50 ~ 80° C -40 ~ 70° C (conduction-cool with pre-heat) 5 ~ 85 % @ 45° C, non-condensing 10 ~ 95 % @ 45° C, non-condensing 1.5 Grms (without on-board 2.5" SATA HDD) 2G 20G (without on-board 2.5" SATA HDD) 50 G 300m below sea level to 4,000m above sea level 10,000m above sea level (without conformal coating) FCC Class A, CE, RoHS Designed for GR-63-Core and GR-1089-Core PICMG 2.0 R3.0, PICMG 2.1 R.0, PICMG 2.9 R1.0 (std cPCI SKU), PICMG 2.16 R1.0, ANSI/VITA 30.1-2002 Humidity Vibration (5-500 Hz) Shock Altitude Conformance NEBS Level 3 Standards Regulatory Compliance Recommended Configurations CPU Board MIC-3392MILS-PxE Series MIC-3392MILC-P1E Rear I/O Board RIO-3392MIL-AxE Series RIO-3392MIL-AxE Series Enclosure MIC-3039-BE, MIC-3042A/B, MIC-3043A/B/C/D, MIC-3056A, MIC-3081B Customized conduction cool enclosure Ordering Information Front Panel System Board VGA MIC-3392MILS-P1E MIC-3392MILS-P2E MIC-3392MILC-P1E RTM Model RIO-3392MIL-A1E RIO-3392MIL-A2E 1 1 - USB2.0 BMC Reset 2 2 - Yes Yes - System Reset Yes Yes - Conduction Cool Yes Rear Panel LAN 4 4 COM 1 1 DVI-I 2 2 PS2 1 1 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 x1 blue/yellow for Hot Swap/HDD, x1 green for Master/Drone, x1 yellow BMC Heartbeat, and x1 green for Power Temperature Environment Embedded Box PC USB 2 2 IDE 1 1 CPU Intel U7500 Intel L2400 Intel U7500 Main On-board Features Storage Memory CF Socket Channel 2 GB 1 1 2 GB 1 1 2 GB 1 - SODIMM Socket 1 1 - On-board Header/Socket/Connector CPCI COM Console USB Conn. FDD LPT SATA Interface Interface Interface 1 1 2 1 1 2 J3 ~ J5 1 1 2 1 1 2 J3 ~ J5 Conformal Coating Intelligent Video Platforms 10 CompactPCI 11 Yes Conformal Coating Yes One CF socket Memory DIMM socket One DB-15 VGA port Two USB 2.0 ports One passive CPU heatsink MIC-3392MILS-PxE Series MIC-3392MILC-P1E Online Download www.advantech.com/products 11-13 MIC-3393 6U CompactPCI® Intel® Xeon® Processor Quad/Dual Core Blade Features Supports 45 nm Intel® Xeon® Low Voltage/Ultra Low Voltage processor Intel® 5100MCH chipset supports 1066/1333 MHz FSB Up to 6 GB (DDR2 533/667) ECC memory Optimized design in one or two slots SBC with 2.5" SATA HDD/CompactFlash socket Optional Extension Module on 8HP version supports two XMCs/PMCs, two 2.5" SATA HDDs or VGA display output TPM, three GbE ports, six SATA ports, four USB 2.0 ports, one VGA port, three RS-232 ports, one PS/2 connector, and PCIe x1, PCIe x4 interfaces to the Rear Transition Module (RTM) Built-in Intel® I/OAT technology for enhanced I/O performance PICMG 2.16 R1.0, PICMG 2.9 R1.0, PICMG 2.1 R2.0 compliant RoHS COMPLIANT 2002/95/EC Introduction Experience true server class performance on CompactPCI. Using Intel® 45nm 64-bit Xeon technology with up to four Cores at 2.33 GHz combined with the powerful Intel® 5100MCH/ ICH9R chipset, the MIC-3393 blade boosts computing and I/O performance deploying the latest virtualization, multi-threading and I/OAT acceleration techniques. Enhanced Xeon® packaging, front side bus parity, onboard, soldered DRAM with ECC support and RASUM features integrated in the 5100 MCH combined with PICMG2.9, IPMI-based management make the MIC-3393 a highly available and reliable high performance computing engine. The comprehensive I/O subsystem includes a 2.5" SATA HDD or CompactFlash slot, three advanced Gigabit Ethernet controllers, two UARTs, USB ports and a TPM. The addition of PCIe links to the RTM further enhances versatility compared to previous generation blades resulting in best-in-class connectivity. The RIO-3311 RTM module supports one PS/2 connector with both keyboard and mouse ports, three USB ports, two RS-232 ports, 2 SATA ports, a PCIe based server graphics controller with VGA port, a USB port for USB NAND flash module, and alternate cabling for the three Gigabit Ethernet ports of the MIC-3393. In case the SATA disk drives and SATA RAID support of the ICH9R do not meet performance and reliability requirements, the RIO-3311 SAS version supports a 4-port SAS controller with RAID and failover support. The MIC-3393 is outfitted with single slot (4HP) or dual slot (8HP) front panels to match CPU performance, CPU power dissipation, and system cooling capabilities. The 8HP version of the blade can be extended with a MIC-3312 mezzanine module which can carry two XMCs/PMCs or two 2.5" SATA HDDs to support enhanced I/O modularity and additional mass storage options; or extended with a MIC-3313 mezzanine module which support one VGA display output. If further combine with rear I/O board RIO-3313, the CPCI system can support dual display. Specifications Processor System Memory CompactPCI Interface Ethernet Graphics (on RTM) Storage Front I/O 11-14 CPU Chipset Front Side Bus BIOS Technology Max. Capacity Socket J1~J2 Connectors J3 Connector J5 Connector Bridge Mode Controller Interface I/O Connector Controller Interface I/O Connector Controller Resolution Type Channels USB 2.0 COM LAN Front Panel LEDs Buttons CompactPCI Systems Quad-Core/Dual-Core Intel Xeon processor LV or Dual-Core Intel Xeon processor ULV up to 2.66 GHz Intel 5100MCH/ICH9R 1066/1333 MHz with parity protection Redundant AMI 2MByte SPI flash Dual channel DDR2 533/667 MHz with ECC 2 GB onboard, max. 6 GB total SODIMM x2 64-bit/66 MHz PCI local bus + RTM PICMG2.16 + RTM RTM Pericom PI7C9X130DNDE + PLX PCI 6540CB System Master/Drone (Standalone) 2 Intel 82574L single-port Gigabit Ethernet controllers 10/100/1000 Mbps Ethernet PICMG2.16 x 1, RJ-45 x1 or RTM x 2 Intel ICH9R MAC and Intel 82566DM Gigabit Ethernet PHY 10/100/1000 Mbps Ethernet RJ-45 x 1 or RTM x 1 XGI Volari Z11 PCIe Server graphics with 32 MB VRAM Up to 1600 x 1200, 64k hi-color at 70Hz SATA-II 1 channel. onboard SATA HDD carrier (default) or CF disk carrier (option)* 2 channels. to RTM 2 channels to extension module (8HP only) 2 type A 1 RS-232 on RJ-45 2 10/100/1000 Mbps on RJ-45 x 1 blue/yellow for Hot Swap/HDD, x 1 green for Master/Drone, x 1 yellow BMC Heartbeat, and x 1 green for Power CPU and BMC reset buttons MIC-3393 Specifications (Cont.) USB COM LAN SATA PCIe Others CMOS Boot Options Console Other Output Interval Controller Controller Compatibility Configuration TDP (max./typ.) Rear I/O BIOS Watchdog Timer Hardware Monitor BMC Operating System Power Requirement Physical Characteristics 4 ports 2 ports 3 10/1000/1000 Mbps 2 ports 1 PCIe x 1, 1 PCIe x 4 PS/2 for keyboard & mouse Battery backed up with backup copy in EEPROM SATA, SAS, USB ports, USB flash disk, network (PXE) VGA or console redirection over COM Port, SoL supported by BMC Supports operation without disk, keyboard, video Local Reset and Interrupt Programmable 1s ~ 255s Winbond 83627DHG: voltages, CPU, chipset, board temperature Renesas H8S 2167, IPMIv2.0 compliant Windows XP 32/64 bit‚ Windows Server 2008 32/64 bit, Windows Server 2003 32/64 bit, Linux 4HP 8HP 60W / <50W 90W / <75W 6U /1 slot width (4HP), 233.35 x 160 x 20 mm (9.2" x 6.3" x 0.8"), 1.03 kg (2.27 lb) 6U /2 slots width (8HP), 233.35 x 160 x 40 mm (9.2" x 6.3" x 1.6"), 1.42 kg (3.14 lb) Operating Non-operating 0 ~ 55° C (32 ~ 122° F) -40 ~ 85° C (-40 ~ 185° F) 95 %@ 40° C, non-condensing 95 %@ 60° C, non-condensing 5 ~ 500Hz, 2Grms (4HP), 1Grms (8HP) 5 ~ 500Hz, 3.5Grms (without on-board 2.5" SATA HDD) 15G, 6ms (without on-board 2.5" SATA HDD) 4,000m above sea level FCC Class A, CE, RoHS Designed for GR-63-Core and GR-1089-Core PICMG2.0 R3.0, PICMG2.1 R2.0, PICMG2.9 R1.0, PICMG2.16 R1.0 Dimensions & Weight Temperature Humidity Environment Vibration Bump Altitude Conformance NEBS Level 3 Standards Regulatory Compliance Supported CPU Configurations Intel CPU Model Number CPU architecture # Cores Freq. Cache FSB CPU TDP L5410 L5408 L5238 L5215 L3014 45 nm 45 nm 45 nm 45 nm 45 nm 4 4 2 2 1 2.33 GHz 2.13 GHz 2.66 GHz 1.86 GHz 2.4 GHz 12 MB 12 MB 6 MB 6 MB 3 MB 1333 MHz 1066 MHz 1333 MHz 1066 MHz 1066 MHz 50W 40W 35W 20W 30W Required airflow for single slot width 60CFM 50CFM 40CFM 20CFM 50CFM* Required airflow for dual slot width 35CFM 30CFM 25CFM 15CFM 30CFM *Note: These CPUs support extended case temperature and are qualified for NEBS environments **Note: Strong airflow required for the L3014 CPU is restricted to its thermal specification (Tc 60° C) Embedded Box PC 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 Intelligent Video Platforms 10 CompactPCI 11 Recommended Configurations CPU Board MIC-3393A-M2E MIC-3393B-M2E MIC-3393C-M2E MIC-3393D-M2E Extension Module MIC-3312-A1E MIC-3312-A2E MIC-3313-A1E Rear I/O Board RIO-3311-A1E or RIO-3311-A2E RIO-3311-A1E or RIO-3311-A2E RIO-3311-A1E or RIO-3311-A2E RIO-3311-A1E, RIO-3311-A2E or RIO-3313-A1E* *Note: RIO-3313-A1E must be used with MIC-3313-A1E Ordering Information System Board MIC-3393A-M2E MIC-3393B-M2E MIC-3393C-M2E MIC-3393D-M2E LAN 2 2 2 2 COM 1 1 1 1 USB 2 2 2 2 Front Panel XMC/PMC Knockout 2 - VGA Knockout 1 Memory 2 GB 2 GB 2 GB 2 GB Main On-board Features SATA HDD Socket / CF Socket 1 1 1 1 Slot Width 1 2 2 2 Extension Module MIC-3312-A1E MIC-3312-A2E MIC-3313-A1E *Note: Use of single rank, dual die package stack (3.8 mm) SORDIMM is advised **Note: CF board is included as accessory RTM Model RIO-3311-A1E RIO-3311-A2E RIO-3313-A1E LAN 3 3 - COM 2 2 - VGA 1 1 1 Rear Panel DVI-D PS/2* 1* 1* 2 - USB 2 2 - MiniSAS 1 - USB 1 1 - On-board Header/Socket/Connector USB Flash** SATA SAS (SATA interface) Slot Width 2 4 1 1 2 1 1 - Conn. J1,J3,J5 J1,J3,J5 J5 *Note: One PS/2 port carries the signals for both K/B and mouse. Y cable is included. **Note: Use of Advantech EmbCore USB 2.0 Disk Module (Type C) recommended Online Download www.advantech.com/products 11-15 MIC-3393 Features Board Diagram DDR2 SORDIMM 533/667 ECC FSB DDR2 onboard 533/667 ECC DDR2 SORDIMM 533/667 ECC Channel 1 Intel® 5100MCH/ ICH9R PCIe2 PCI-X +12V, +5V, +3.3V PCIex8 Extension Module XTM (8HP only) SATA-II (2x) USB 2.0 (2x) SMB PCIex1 SATA-II (2x) USB 2.0 (4x) HWM / Sensors LPC ICH9R BMC SuperIO UART (2x) TPM User LEDs UART (2x) to RTM From SuperIO SATA-II User + Reset buttons i82566 J5 J3 MUX Lattice FPGA LFXP2 UART (2x) PS/2 (KB/MS) UART (2x) i82574L SPI 2MByte LOM RS-232 from FPGA to FPGA MUX PCIex1 PCIex1 UART, BUS IF Hot Swap Controller PCIex4 ICS Clock generator I2C J1/J2 PCI-X 64/66 PCIex4 DDR2 onboard 533/667 ECC All platform clocks PCI-X 64/66 PLX6540 Intel Xeon SC/DC/QC 52xx/53xx 54xx series Channel 0 Handle SW JMicro SATA2 PATA PATA Compact Flash USB 2.0 USB 2.0 SATA-II Hard Disk Drive Adapter, CF and HDD are mutually exclusive Ordering Information (Cont.) XTM Model MIC-3312-A1E MIC-3312-A2E MIC-3313-A1E On-board Header/Socket/Connector SATA HDD 2 - XMC/PMC 2 - One SATA HDD/ CompactFlash socket VGA 1 Two RJ-45 Gigabit LAN ports One RJ-45 COM port Two XMC/PMC knockouts (MIC-3393B only) Memory DIMM sockets One passive North Bridge heatsink One passive CPU heatsink 11-16 CompactPCI Systems Two USB 2.0 ports MIC-3395 6U CompactPCI® 2nd and 3rd Generation Intel Core i3/i5/i7 Processor Blade with ECC Support Features NEW Support 2nd and 3rd Generation Intel® Core™ i3/i5/i7 Processors and Intel QM67 PCH with embedded graphics (dual independent display) Up to 16 GB (DDR3 1066/1333/1600) ECC memory (max 8GB on-board socket SO-UDIMM x1, max 8GB) Optimized single-slot SBC with 2.5" SATA-III HDD/CFast socket Integrate on-board 2KB NVRAM and min. 8GB flash (optional) TPM Two SATA ports, four USB 2.0 ports, two DVI ports, two RS-232 ports, one PS/2 connector, and PCIe x4 interfaces to the Rear Transition Module (RTM) Six gigabit Ethernet ports for PICMG 2.16, front and rear connectivity PICMG 2.16 R1.0, PICMG 2.1 R2.0, PICMG 2.6 R1.0 compliant Embedded Box PC 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 RoHS COMPLIANT 2002/95/EC Introduction Using Intel®'s 2nd and 3rd generation Core™ i3/i5/i7 processors based on 32nm and 22nm process technology supporting up to two Cores / four threads at 2.2 GHz and 4 MB level 2 cache, the MIC-3395 blade boosts computing performance deploying the latest virtualization, techniques and CPU enhancements. Onboard soldered DRAM with ECC support and optional memory expansion via an SODIMM socket extend the memory to a maximum of 16 GB to support the most demanding applications in high performance or virtualized environments, supporting up to 4GB per virtual machine. Dual channel design and memory speeds up to 1333MT/s for 2nd generation or 1600MT/s for 3rd generation processors along with increased cache size and cache algorithms guarantee maximum memory throughput. Combined with the powerful Intel QM67 chipset, these new processors offer improved I/O performance by leveraging 5GT/s DMI and PCIe interfaces. An onboard XMC/PMC site with PCIe x8 gen.2 connectivity can host high speed offload or I/O mezzanines such as the MIC-3666 dual 10GE XMC card. With SATA-III support and up to 6Gbps I/O, the latest enhancements in storage technology such as high speed SSDs can be employed. Six gigabit Ethernet ports for PICMG 2.16, front and rear connectivity ensure best in class network connectivity. The processor’s integrated enhanced graphics engine (HD3000/HD4000) offers twice the performance over previous generations. With dual independent display support, the MIC-3395 is an ideal fit for demanding workstation or imaging applications. RASUM features integrated in the CPU and chipset combined with PICMG 2.9, IPMI-based management make the MIC-3395 a highly available and reliable computing engine. The RIO-3315 RTM module supports one PS/2 connector with both keyboard and mouse ports, two USB ports, two RS-232 ports, two SATA ports, two DVI ports, and two Gigabit Ethernet ports. In case the SATA disk drives and SATA RAID support of the QM67 do not meet performance and reliability requirements, the RIO-3315 SAS version supports a 4-port SAS controller with RAID and failover support. Specifications Processor System CompactPCI Interface XMC/PMC Socket Memory Graphics CPU Platform Controller Hub BIOS J1 Connector J2 Connector J3 Connector J4~J5 Connectors PCIe x8 PCI Technology Max. Capacity Socket Controller VRAM Resolution Controller Ethernet Storage Interface I/O Connector Controller Interface I/O Connector Mode Channels Mode Channels Intelligent Video Platforms 10 CompactPCI 11 Intel 2nd and 3rd Generation Core i3/i5/i7 up to 2.2 GHz (4MB L2 cache) Hub Intel QM67 Redundant AMI 8MByte SPI flash 32-bit PCI local bus 64-bit PCI local bus PICMG2.16 + RTM area RTM area Gen2 (5GT/s) 64-bit/66 MHz DDR3 1066/1333/1600 MHz, dual channel with ECC support Up to 16 GB (8 GB on-board, 8 GB SODIMM) 204-pin SOUDIMM x1 Intel embedded graphic controller HD3000/HD4000 (dual independent display) Dynamic Up to 2048 x 1536, 64k colors at 75Hz 5 Intel 82574L single-port Gigabit Ethernet controllers (on PCIe x1 channel), 1 Intel 82579LM single-port Gigabit Ethernet controller 10/100/1000 Mbps Ethernet PICMG 2.16 and RJ-45 x2 (RTM rear panel), RJ-45 x1 (front panel) 1 Intel 82579LM single-port Gigabit Ethernet controller 10/100/1000 Mbps Ethernet RJ-45 (front panel) SATA-III Onboard SATA-III connector SATA-II 2 channels to RTM 1 channel to CFast socket 1 channel to on-board flash (optional) Online Download www.advantech.com/products 11-17 MIC-3395 Specifications (Cont.) USB2.0 COM LAN Front I/O Front Panel LEDs Buttons USB2.0 COM LAN SATA PCIe Others Output Interval HWM Controller Compatibility NVRAM Configuration TDP Dimensions (W x D) Rear I/O Watchdog Timer Hardware Monitor BMC Operating System Miscellaneous Power Requirement Physical Characteristics Temperature Humidity Vibration (5-500 Hz) Shock Altitude Conformance NEBS Level 3 Standards Environment Regulatory Compliance 2 type A 1 RS232 on RJ45 2 10/100/1000 Mbps on RJ45 x1 blue/yellow for Hot Swap/HDD, x1 green for Master/Drone mode, x1 yellow BMC Heartbeat, and x1 green for Power CPU reset button and BMC reset button 4 ports 2 ports 2 ports 2 SATA-II 1 PCIe x4 PS/2 for keyboard & mouse, DVI-I and DVI-D Local Rest and Interrupt Programmable 1s ~ 255s NCT6776F Renesas H8S 2167, IPMI v2.0 compliant Windows 7, Windows 2008, Windows 2003, Windows XP SP3, RHEL 6.1, VxWorks 6.x (on request) 2KB 4HP Maximum: up to 60 W (quad core), 50 W (dual core) or less, depending on CPU type 233.35 x 160 mm (9.19" x 6.3") Operating Non-operating 0 ~ 55° C (32 ~ 122° F) -40 ~ 85° C (-40 ~ 185° F) 95 % @ 40° C, non-condensing 95 % @ 60° C, non-condensing 2 Grms (without on-board 2.5" SATA HDD) 3.5 Grms 20 G (without on-board 2.5" SATA HDD) 50 G 4,000 m above sea level 10,000 m above sea level FCC Class A, CE, RoHS Designed to meet GR-63-Core and GR-1089-Core PICMG2.0 R3.0, PICMG2.1 R.0, PICMG2.9 R1.0, PICMG2.16 R1.0, Ordering Information Part Number VGA MIC-3395A1-M4E MIC-3395A2-M4E MIC-3395B1-M4E* MIC-3395C1-M4E 1 1 1 1 Front Panel USB2.0 Ethernet (type A) (RJ45) 2 2 2 2 2 2 2 2 Console (RJ45) 1 1 1 1 CPU i7-2655LE i7-2655LE i5-2515E i7-2715QE Onboard Memory 4 GB 4 GB 4 GB 4 GB Main On-board Features CFast Storage Socket Channel 1 1 SATA-III 1 1 SATA-III 1 1 SATA-III 1 1 SATA-III SODIMM Socket 1 1 1 1 *Note: i3 and i5 CPU available by request, please contact your local sales office. Related Products Part Number RIO-3315-A1E RIO-3315-B1E RIO-3315-C1E MIC-3666-AE MIC-3665-AE MIC-3665-BE Description RTM Module with SAS Controller for MIC-3395 RTM Module without SAS Controller for MIC-3395 RTM Module with 4 LAN ports for MIC-3395 Dual 10 Gigabit Ethernet XMC CompactPCI PMC with dual copper (RJ-45) Gigabit Ethernet interfaces CompactPCI PMC with dual fiber Gigabit Ethernet interfaces MIC-3395x-MxE Series VGA port Two USB2.0 One RJ45 (console) One PMC/XMC One CFast Socket / HDD mounting site Memory SODIMM socket 11-18 One passive CPU heatsink CompactPCI Systems Two RJ45 BMC Function No Yes Yes Yes MIC-3525 3U CompactPCI® Rear Transition Board for MIC-3325 Features NEW External rear-panel interface connector for the MIC-3325 CPU board Supports VGA,LAN , USB 2.0, COM, SATA interface Embedded Box PC 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 One VGA , one RJ-45 LAN, and two USB ports USB on the rear panel Two on board COM pin headers for RS-232 One on-board SATA-II connectors RoHS COMPLIANT 2002/95/EC Introduction The MIC-3525 is the first Rear Transition Module (RTM) for MIC-3325. It supports: 1x VGA, 1x RJ-45 LAN, 2x USB on the rear panel and 2x on board COM pin headers for RS-232 and 1x on-board SATA-II connectors. Specifications CompactPCI Connector Power Environment Physical Characteristics J2 Power Consumption Temperature Humidity Dimensions (W x H) Weight Operating 0 ~ 60° C (32 ~ 140° F) 95% @ 40° C, non-condensing 82 x 100 mm (3.3" x 3.95"), 1-slot width 0.2 kg (0.44 lbs) +5 V 1.5A Non-Operating -40 ~ 85° C (-40 ~ 185° F) 95% @ 60° C, non-condensing Ordering Information Part Number MIC-3525-S1E VGA 1 Rear Panel LAN 1 USB 2 COM 2 Intelligent Video Platforms 10 CompactPCI 11 On-board Header / Socket / Connector SATA Slot Width Conn. 2 1 J2 Recommended Configurations Rear I/O Board MIC-3525-S1E CPU Board MIC-3325, MIC-3326 Online Download www.advantech.com/products 11-19 RIO-3310 6U CompactPCI® Rear Transition Boards for MIC-3390 and MIC-3392 Features External rear-panel interface connectors for CPU boards Ultra 320 SCSI interface Supports SATA interface RoHS COMPLIANT 2002/95/EC Introduction The RIO series of rear transition boards provide rear-panel access to the I/O interfaces of Advantech’s CompactPCI CPU boards. RIO-3310S/3310A/3310B is designed for the MIC-3390 and MIC-3392 series. Specifications CompactPCI Connector SCSI Controller SATA RAID Port Multiplier Power Environment Physical Characteristics RIO-3310S: J1/J2/J3/J5; RIO-3310A: J3/J5; RIO-3310B: J3/J5 RIO-3310S: Adaptec AIC-7901 ultra 320 SCSI control chip supports RAID 0, 1, 10 RIO-3310B: JMicron JMB390 SATA II Port Multiplier supports RAID 0, 1, JBOD Power Consumption +3.3 V +5 V 3A 2A Operating Temperature 0 ~ 60° C (32 ~ 140° F) Humidity Dimensions (W x D) 233.35 x 80 mm (9.2" x 3.15"), 1-slot width Weight 0.4 kg (0.88 lb) RIO-3310S-A1E 11-20 CompactPCI Systems +12 V 1A Non-Operating -20 ~ 80° C (-4 ~ 176° F) 5 ~ 95%, non-condensing RIO-3310BE RIO-3310 I/O Interfaces I/O Keyboard Mouse COM1 FDD IDE FE LAN GbE LAN USB VGA COM2 Ultra 320 SCSI (controller chip on board) Parallel SATA RIO-3310S J5 J5 J5 J3 J3/J5 J5 J5 J5 J5 J5 Connector RIO-3310A J5 J5 J5 J5 J3/J5 J5 J5 J5 J5 J5 RIO-3310B J5 J5 J5 J3 J3 J5 J5 J5 J5 J5 RIO-3310S Rear panel Rear panel Rear panel Internal Internal Rear panel (optional) Rear panel Rear panel Rear panel Rear panel Interface Location RIO-3310A Rear panel Rear panel Rear panel Internal Internal Rear panel (optional) Rear panel Rear panel Rear panel Rear panel RIO-3310B Rear panel Rear panel Rear panel Internal Internal Rear panel Rear panel Rear panel/Internal Rear panel Rear panel J1/J2 - - Internal - - J3 - J3 - J3 J3/J5 Internal Internal Internal Internal Internal Internal Ordering Information Part Number Rear Panel Keyboard Mouse COM USB LAN VGA SCSI USB SCSI RIO-3310S-A1E RIO-3310S-A2E RIO-3310AE 1* 1* 1* 1* 1* 1* 2 2 2 1 1 1 1 1 1 1 - 1 1 1 1 - RIO-3310BE 1* 1* 2 1 2 (GbE) 2 (GbE) 2 (GbE) 2 (GbE) 1 (10/100) 1 - 1 - On-board Header IDE FDD 40-pin 1 1 1 1 1 1 1 *Note: Y cable is included. **Note: Among three SATA connectors, two are used for RAID function. Online Download www.advantech.com/products 1 Embedded Box PC 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 Parallel SATA 1 1 1 - 1 3** Intelligent Video Platforms 10 CompactPCI 11 11-21 RIO-3311 6U CompactPCI® Rear Transition Board for MIC-3393 Features External rear-panel interface connectors for the MIC-3393 CPU board Supports SAS, SATA, USB2.0, COM, and PS/2 interfaces One USB header for USB NAND Flash Module Three RJ-45 GbE ports on the rear panel One VGA port on the rear panel One Mini-SAS port on the rear panel RoHS COMPLIANT 2002/95/EC Introduction The RIO-3311 is the first Rear Transition Module (RTM) supporting PCIe connectivity to the main CPCI board enabling significant value-added features and extensions to next generation CPCI blades such as the MIC-3393. The RIO-3311 supports one PS/2 port, 3 USB ports, two RS-232 ports, 2 SATA ports, a PCIe based server graphics controller with VGA port and alternate cabling for the three Gigabit Ethernet ports. Two versions of the RIO-3311 provide a choice of storage options. The RIO-3311-A2E supports SATA disk drives and SATA RAID via the ICH9R. When higher performance and reliability is required, the RIO-3311-A1E supports a 4-port SAS controller with RAID and failover support. Specifications CompactPCI Connector SAS Controller J1/J3/J5 Controller Controller VRAM Resolution Power Consumption Graphics Power Environment LSISAS1064E SAS controller chip supports 3Gb/s SAS / SATA data transfer and RAID XGI Volari Z11 32 MB Up to 1600 x 1200, 64 K hi-color at 70 Hz +3.3 V +5 V 1.5 A 1.5 A Operating Non-Operating 0 ~ 55° C (32 ~ 122° F) -40 ~ 85° C (-40 ~ 185° F) 95% @ 40° C, non-condensing 95 %@ 60° C, non-condensing 233.35 x 80 mm (9.2" x 3.15"), 1-slot width 0.3 kg (0.66 lbs) Temperature Humidity Dimensions (W x D) Weight Physical Characteristics Recommended Configurations Rear I/O Board RIO-3311-A1E, RIO-3311-A2E CPU Board MIC-3393A, MIC-3393B, MIC-3393C Series Ordering Information Part Number RIO-3311-A1E RIO-3311-A2E LAN 3 3 COM 2 2 Rear Panel VGA PS/2* 1 1* 1 1* USB 2 2 MiniSAS 1 - *Note: One PS/2 port carries the signals for both K/B and mouse. Y cable is included. **Note: Use of Advantech EmbCore USB 2.0 Disk Module (Type C) recommended 11-22 CompactPCI Systems USB 1 1 On-board Header/Socket/Connector USB Flash** SATA SAS (SATA interface) Slot Width Conn. 2 4 1 J1,J3,J5 1 2 1 J1,J3,J5 RIO-3311 RIO-3311-A1E Two USB 2.0 ports One DB-15 VGA port 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 Two COM ports One SGPIO header One MiniSAS port Four SAS/SATA connectors Embedded Box PC One PS/2 Keyboard & Mouse port One USB 2.0 header Three RJ-45 Gigabit LAN ports Two SATA connectors RIO-3311-A2E Two USB 2.0 ports One DB-15 VGA port Intelligent Video Platforms 10 CompactPCI 11 Two COM ports One USB 2.0 header for NAND flash module One USB 2.0 header One PS/2 Keyboard & Mouse port Three RJ-45 Gigabit LAN ports Two SATA connectors Online Download www.advantech.com/products 11-23 RIO-3313 6U CompactPCI® Rear Transition Board for MIC-3313 Features External rear-panel interface connectors for the MIC-3313 XTM board Supports VGA, DVI-D interfaces One SATA connector Introduction The RIO-3313 is the RTM module supporting MIC-3313 XTM VGA module. The combination of RIO-3313 and MIC-3313 can achieve dual display solution for MIC-3393 CPCI blade. The RIO-3313 supports two DVI-D ports, one VGA port, and one SATA connector. Specifications CompactPCI Connector Graphics J5 Interface Environment Temperature Humidity Dimensions (W x D) Weight Physical Characteristics VGA2, DVI1, and DVI2 Operating 0 ~ 55° C (32 ~ 122° F) 85 % @ 40° C, non-condensing 233.35 x 80 mm (9.2" x 3.15"), 1-slot width 0.3 kg (0.66 lbs) Non-Operating -20 ~ 80° C (-4 ~ 176° F) 95 % @ 60° C, non-condensing One DB-15 VGA port DVI-D port One SATA connectors DVI-D port 11-24 CompactPCI Systems RIO-3313 Board Diagram Rear Panel DVI-D1 J5 DVI-D2 Embedded Box PC 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 VGA2 Recommended Configurations Rear I/O Board RIO-3313-A1E CPU Board MIC-3393D Series Enclosure MIC-3042, MIC-3043 Series Intelligent Video Platforms 10 CompactPCI 11 Ordering Information Part Number RIO-3313-A1E Rear Panel VGA 1 DVI-D 2 On-board Header/Socket/Connector SATA Slot Width 1 1 Online Download www.advantech.com/products Conn. J5 11-25 RIO-3315 6U CompactPCI® Rear Transition Board for MIC-3395 Features NEW External rear-panel interface connector for the MIC-3395 CPU board Supports SAS, SATA, USB 2.0, COM and PS/2 interfaces One USB header for USB NAND flash module Two RJ-45 GbE ports on the rear panel One Digital and One analog DVI port on the rear panel One MiniSAS port on the rear panel (for RIO-3315-A1E) Two PICMG 2.16 LAN ports on the rear panel (for RIO-3315-C1E) RoHS COMPLIANT 2002/95/EC Introduction The RIO-3315 is the first Rear Transition Module (RTM) supporting PCIe connectivity to the main CPCI board enabling significant value-added features and extensions to next generation CPCI blades such as MIC-3395. The RIO-3315 supports: one PS/2 port, six USB ports, two RS-232 ports, two SATA ports, two Gigabit Ethernet ports, one digital and one integrated (digital/analog) DVI port. Three versions of RIO-3315 provide a choice of storage and LAN options. The RIO-3315-A1E with LSI1064E SAS controller supports a 4-port SAS controller with RAID, which allows switching between four internal SAS/SATA or four external MiniSAS ports. The RIO-3315-B1E supports SATA disk drives and SATA RAID via the QM67 PCH. An additional DSUB COM port is placed on rear panel. The RIO-3315-C1E provides two GbE LAN ports and two PICMG 2.16 LAN ports on the rear panel. Specifications CompactPCI Connector SAS Controller Power Environment Physical Characteristics J3 / J4 / J5 LSI1064E SAS Controller chip supports 3 Gb/s SAS/SATA data transfer and RAID Power Consumption +3.3 V 3A Operating Temperature 0 ~ 60° C (32 ~ 140° F) Humidity 95 % @ 40° C, non-condensing Dimensions (W x D) 233.35 x 80 mm (9.2" x 3.15"), 1-slot width Weight 0.3 kg (0.66 lbs) +5 V 2A Non-Operating -40 ~ 85° C (-40 ~ 185° F) 95 % @ 60° C, non-condensing Recommended Configurations Rear I/O Board RIO-3315-A1E RIO-3315-B1E RIO-3315-C1E CPU Board MIC-3395A, MIC-3395B, MIC-3395C Series MIC-3395A, MIC-3395B, MIC-3395C Series MIC-3395A, MIC-3395B, MIC-3395C Series Ordering Information Rear Panel COM COM LAN PS/2* USB DVI-D DVI-I MiniSAS (RJ-45) (DB9) RIO-3315-A1E 2 1 1 2 1 1 1 RIO-3315-B1E 2 1 1 1 2 1 1 RIO-3315-C1E 4 1 1 2 1 1 *Note: One PS/2 port carries the signals for keyboard and mouse. A “Y” cable is included. Part Number **Note: The use of Advantech’s EmbCore USB 2.0 Disk Module (Type C) is recommended. 11-26 CompactPCI Systems USB 2 2 2 On-board Header/Socket/Connector SAS (SATA Slot VGA COM SATA Interface) Width 1 1 2 4 1 1 2 1 1 1 2 1 Conn. J3, J4, J5 J3, J4, J5 J3, J4, J5 RIO-3392MIL 6U CompactPCI® Rear Transition Board for MIC-3392MIL Features External rear-panel interface connectors for the MIC-3392MIL CPU board On-board battery Embedded Box PC 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 Supports SATA, IDE, FDD, LPT, USB2.0, COM, and audio interfaces Four RJ-45 ports on the rear-panel Two DVI-I ports on the rear panel RoHS COMPLIANT 2002/95/EC Introduction RIO-3392MIL is designed specifically for the MIC-3392MIL series. It contains a rich variety of I/O interfaces and ports on the external rear panel, extending the functional features of MIC-3392MIL. Specifications CompactPCI Connector J3/J4/J5 Environment Temperature Humidity Dimensions (W x D) Weight Physical Characteristics Operating -40 ~ 70° C (-40 ~ 158° F) 5 ~ 85 % @ 45° C, non-condensing 233.35 mm x 80 mm (9.2" x 3.15"), 1-slot width 0.305 kg (0.672 lbs) Non-Operating -50 ~ 80° C (-58 ~ 176° F) 10 ~ 95 % @ 45° C, non-condensing Recommended Configurations Rear I/O Board RIO-3392MIL-AxE Series RIO-3392MIL-AxE Series CPU Board MIC-3392MILS-PxE Series MIC-3392MILC-PxE Series Enclosure MIC-3039-BE, MIC-3042A/B, MIC-3043A/B/C/D, MIC-3056A, MIC-3081B Customized conduction cool enclosure Intelligent Video Platforms 10 CompactPCI 11 Ordering Information Part Number RIO-3392MIL-A1E RIO-3392MIL-A2E Rear Panel LAN COM DVI-I PS2 USB IDE 4 4 1 1 2 2 1 1 2 2 1 1 On-board Header/Socket/Connector COM Console FDD LPT SATA Interface Interface 1 1 2 1 1 1 1 2 1 1 USB Interface 2 2 Conformal Coating J3 ~ J5 J3 ~ J5 v IDE Interface Audio Interface Four RJ-45 ports COM port USB Interface FDD Interface PS2 Keyboard & Mouse port Two DVI-I ports Two USB2.0 ports CPCI Conn. Power & HDD LEDs LPT Two SATA Interfaces Console Interface COM Interface Note: final production will not contain J1 and J2 connectors. Online Download www.advantech.com/products 11-27 MIC-3312 6U CompactPCI® Extension Board for MIC-3393 Features Extension module for MIC-3393 CPU board Supports 2 XMC/PMC or 2 SATA interfaces RoHS COMPLIANT 2002/95/EC Introduction The MIC-3312 is an extension module for CPCI blades using dual slot (8HP) front panels. It can carry two XMCs/PMCs or two 2.5" Serial ATA HDDs/SSDs. Especially where the choice of CPU for the MIC-3393 and the thermal environment in the chassis mandate the use of an 8HP front panel for the MIC-3393, the MIC-3312 can be used as a very efficient way to support enhanced I/O modularity and additional mass storage options. Using dual HDDs or SSDs on MIC-3312-A2E can provide integrated storage with RAID support using the ICH9R’s features on the MIC-3393. Adding PMCs and XMCs on the MIC-3312-A1E, such as the MIC-3665 dual GbE PMC or an 10GE XMC Module can be used to extend port count or enhance the CompactPCI platform to add 10Gigabit Ethernet connectivity. With the advent of quad Core processors on the MIC-3393, there is also sufficient CPU power to support high speed connectivity on CompactPCI. Specifications CompactPCI Connector XMC PMC Power Consumption Environment Physical Characteristics 11-28 J1 Interface Interface MIC-3312-A1E (without XMC/PMC) MIC-3312-A2E (with SATA HDD*2) Temperature Humidity Dimensions (W x D) Weight CompactPCI Systems PCIe x8 PCI-X 64-bit/66 MHz +3.3V 1.5A - +5V 2A Operating Non-Operating 0 ~ 55° C (32 ~ 122° F) -40 ~ 85° C (-40 ~ 185° F) 95 % @ 40° C, non-condensing 95 % @ 60° C, non-condensing 233.35 x 160 mm (9.2" x 6.3"), 2-slot width (MIC-3393 + MIC-3312) 0.2 kg (0.44 lbs) (MIC-3312) MIC-3312 Board Diagram MIC-3312-A1E XMC/PMC Embedded Box PC 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 PCIex8 XTM Conn. PCIex8 PCIe Switch PCIex4 PCIe2 PCI-X PCI-X 64/66 PCIex8 XMC/PMC MIC-3312-A2E SATA-II Hard Disk Drive XTM Conn. SATA-II Recommended Configurations Extension Module MIC-3312-A1E MIC-3312-A2E CPU Board MIC-3393B-M2E MIC-3393C-M2E MIC-3312-A1E Hard Disk Drive Ordering Information Part Number MIC-3312-A1E MIC-3312-A2E On-board Header/Socket/Connector XMC/PMC SATA HDD 2 2 Intelligent Video Platforms 10 CompactPCI 11 MIC-3312-A2E Online Download www.advantech.com/products 11-29 MIC-3313 6U CompactPCI® Extension Board for MIC-3393 Features Extension module for MIC-3393 CPU board Supports 1 VGA display port On-board S3 GPU On-board 256 MB DDR2 memory PCIe x8 interface Introduction The MIC-3313 is an extension module for CPCI blades using dual slot (8HP) front panels. It can support one VGA display output. Especially where the choice of CPU for the MIC-3393 and the thermal environment in the chassis mandate the use of an 8HP front panel for the MIC-3393, the MIC-3313 can be used as a very efficient way to support display solutions. An on-board S3 435ULP low power GPU and 256MB DDR2 memory on MIC-3313 allows it to support high performance display solutions for MIC-3393. If further combined with RIO-3313, the CPCI system can support dual display. Specifications CompactPCI Connector XTM GPU Memory Power Consumption Environment Physical Characteristics 11-30 J1, J5 Interface S3 DDR2 MIC-3313-A1E Temperature Humidity Dimensions (W x D) Weight CompactPCI Systems PCIe x8 435ULP 256 MB +3.3 V +5 V 0.21 A 1.89 A Operating Non-Operating 0 ~ 55° C (32 ~ 122° F) -20 ~ 80° C (-4 ~ 176° F) 85 % @ 40° C, non-condensing 95 % @ 60° C, non-condensing 233.35 x 160 mm (9.2" x 6.3"), 2-slot width (MIC-3393 + MIC-3313) 0.2 kg (0.44 lbs) (MIC-3313) MIC-3313 Board Diagram VGA2 J5 DVI2 s3 GPU 435ULP DVI1 XTM CONNECTOR Memory Interface (64 bits) DDR2 memory 64M x 16 VGA1 Recommended Configurations Extension Module MIC-3313-A1E CPU Board MIC-3393D Series Ordering Information Enclosure MIC-3042, MIC-3043 Series Part Number MIC-3313-A1E 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 PCIe x 8 VGA1 Front Panel Embedded Box PC VGA 1 On-board Header/Socket/Connector Slot Width Conn. 1 J1,J5 Online Download www.advantech.com/products Intelligent Video Platforms 10 CompactPCI 11 11-31 MIC-3611 MIC-3612 MIC-3620 4-port RS-422/485 3U CompactPCI® Card with Surge and Isolation Protection 4-port RS-232/422/485 3/6U CompactPCI® Card 8-port RS-232 3U CompactPCI® Card MIC-3611 MIC-3612 Features Features Features PCI Specification 2.1x compliant Speeds up to 921.6Kbps 16C954 UARTs with 128-byte standard Standard Industrial 3U/6U sized CPCI Board size I/O address automatically assigned by PCI Plug-and-Play OS supported: Windows 98/2000/XP Surge protection: 2,000 VDC Isolation protection: 2,500 VDC Interrupt status register for increased performance Space reserved for termination resistors(for RS-422/485) Automatic RS-485 data flow control PCI Specification 2.1 compliant Speeds up to 921.6 kbps 4-port RS-232/422/485 Surge protection 16C954 UARTs with 128-byte standard Standard Industrial CompactPCI® 3U Board size I/O address automatically assigned by PCI Plug & Play OS supported: Windows® 98/2000/XP, Linux 2.4 Interrupt status register for increased performance Automatic RS-485 data flow control Tx/Rx LED indicator PCI Specification 2.1 compliant Speeds up to 921.6 kbps 16C954 UARTs with 128-byte standard 8-port RS-232 Standard Industrial CompactPCI 3U Board size I/O address automatically assigned by PCI Plug & Play OS support: Windows 98/2000/XP, Linux 2.4 Interrupt status register for increased performance Specifications Specifications Specifications Communications Communications Communications Communication IRQ Data Bits Stop Bits Parity Speed Data Signals Surge Protection Isolation Protection BUS controller: PLX9030 Controller UART: 16C954 UART with 128-byte FIFOs All ports use the same IRQ assigned by PCI Plug-and-Play 5, 6, 7, 8 1, 1.5, 2 none, even, odd 50bps ~ 921.6 Kbps TxD, RxD ,RTS, CTS (for RS-422/485) 2,000 VDC 2,500 VDC Bus Type CompactPCI bus specification 2.1 compliant I/O Connectors DB44 and four RS422/485 DB9 male Dimensions (L x H) 160 x 100 mm (6.3" x 3.9"), 3U bracket Power Consumption +5 V @ 600 mA Operating Temperature 0 ~ 60° C (32 ~ 140° F) Storage Temperature -20 ~ 80° C (-4 ~ 176° F) Operating Humidity 5 ~ 95% Relative Humidity, non-condensing Certifications CE, FCC Ordering Information MIC-3611/3 MIC-3611R/3 Communication Data Bits Data Signals IRQ Parity Speed (bps) Stop Bits BUS controller: PLX9030 Controller UART: 16C954 5, 6, 7, 8 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND (for RS-232) TxD, RxD, RTS, CTS (for RS-422) DATA+, DATA- (for RS-485) All ports use the same IRQ assigned by PCI Plug & Play None, even, odd 50 ~ 921.6 k 1, 1.5, 2 4-port RS-422/485 3U CompactPCI communication card w/isolation & surge protection 4-port RS-422/485 3U CompactPCI communication card w/isolation & surge protection, Rear IO support CompactPCI Systems PICMG Compliance Bus Type I/O Connectors Dimensions (L x H) CompactPCI V2.0, R 3.0 Hot swap V2.1, R 2.0 CompactPCI V2.1 DB 44pin female 160 x 100 mm (6.3" x 3.9"), 3U bracket Power Consumption +5 V +3.3 V +12 V Typical 220 mA 100 mA 60 mA Max. 285 mA 200 mA 80 mA Operating Temperature 0 ~ 70° C (32 ~ 158° F) (IEC68-2-1, 2) Storage Temperature -20 ~ 80 °C (-4 ~ 176 °F) Operating Humidity 5 ~ 95% RH, non-condensing (IEC 68-2-1, 2) Ordering Information MIC-3612/3 Communication Data Bits Data Signals IRQ Parity Speed (bps) Stop Bits 3U CompactPCI 4-port RS-232/422/485 Card PCI9030 + 16C954 Controller 5, 6, 7, 8 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND All ports use the same IRQ assigned by PCI Plug & Play None, even, odd 50 ~ 921.6 k 1, 1.5, 2 General PICMG Compliance General General 11-32 MIC-3620/3 CompactPCI V2.0, R 3.0 Hot swap V2.1, R 2.0 Bus Type CompactPCI bus specification 2.1 compliant I/O Connectors SCSI 68-pin female Dimensions (L x H) 160 x 100 mm (6.3" x 3.9"), 3U Bracket Power Consumption +5 V, +3.3 V, +12 V Operating Temperature 0 ~ 70° C (32 ~ 158° F) (refer to IEC68-2-1, 2) Storage Temperature -20 ~ 80 °C (-4 ~ 176 °F) Storage Humidity 5 ~ 95% Relative Humidity, non-condensing (IEC 68-2-1, 2) Ordering Information MIC-3620/3 3U CompactPCI 8-port RS-232 Card MIC-3621 MIC-3680 8-Port RS-232/422/485 6U CompactPCI® Card with Surge Protection 2-Port CAN-bus 3U CompactPCI® Card MIC-3621 MIC-3680R/3 Features Features CPCI Specification 2.1 compliant Speeds up to 921.6 kbps 16C954 UARTs with 128-byte standard 8-port RS-232/485/422 Standard Industrial CompactPCI 6U Board size I/O address automatically assigned by PCI Plug & Play Interrupt status register for increased performance Automatic RS-485 data flow control OS support: Windows 2000/XP Specifications Communications BUS Controller: PCI9030 UART:16C954 Controller CAN Controller Frequency16 MHz TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND TX+, TX-, RX+, RX-, RTS+, RTS-, CTS+, CTS-, GND DATA+, DATA-, GND 50~921.6k 5, 6, 7, 8 1, 1.5, 2 None, even, odd All ports use the same IRQ assigned by PCI plug & play 2,500 VDC CAN Transceiver Communication Controller Ports Protocol Signal Support Speed (bps) Isolation Protection General CompactPCI V2.0, R 2.1 Hot swap V2.1, R 2.0 CompactPCI bus specification 2.1 compliant Hotswap Support Yes 2 x DB44 (female) 233.35 x 160 mm (9.19" x 6.3"), 6U Bracket +5V, +3.3V, +12V 0~70°C (32~158°F) (refer to IEC68-2-1, 2) -20~80°C (-4~176°F) 5~95%, Relative Humidity, non-condensing (refer to IEC 68-1,-2,-3) Ordering Information MIC-3621RE MIC-3621RIOE 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 Intelligent Video Platforms 10 CompactPCI 11 82C250 SJA-1000 2 CAN 2.0 A/B CAN_H, CAN_L, GND Up to 1 Mbps programmable transfer rate 2,500 VDC General PICMG Compliance PICMG Compliance Bus Type I/O Connectors Dimensions (LxH) Power Consumption Operating Temperature Storage Temperature Storage Humidity CompactPCI specification PICMG 2.0 R3.0 compatible Hot swap support Two individual CAN ports Supports CAN2.0 A/B High speed transmission up to 1 Mbps 16 MHz CAN controller frequency Optical isolation up to 2,500 VDC Microsoft Windows DLL library and examples included Supports Windows 98/2000/XP drivers and utility Supports Rear I/O Specifications Communications Communication Controller Data Signals - RS-232 RS-422 RS-485 Speed (bps) Data Bits Stop Bits Parity IRQ Surge Protection MIC-3680/3 Embedded Box PC CompactPCI V2.0, R 3.0 Hot swap V2.1, R 2.0 Bus Type CompactPCI I/O Connectors 2 x DB9-M Dimensions (L x H) 160 x 100 mm (6.3" x 3.9") Power Consumption 5 V @ 400 mA (Typical) Operating Temperature 0 ~ 65° C (32 ~ 149° F ) Storage Temperature -25 ~ 85° C (-13 ~ 185° F ) Storage Humidity 5 ~ 95% RH, non-condensing Ordering Information MIC-3680/3 MIC-3680R/3 6U CompactPCI 8-port RS-232/485/422 Front I/O Card and Rear I/O Support 6U CompactPCI Rear I/O Module for MIC-3621RE 3U CompactPCI 2-port Isolated CAN Communication Card 3U CompactPCI 2-port Isolated CAN Communication Card with Rear I/O Support Online Download www.advantech.com/products 11-33 MIC-3666 Dual 10 Gigabit Ethernet XMC Features Intel® 82599 Dual Port 10 Gigabit Ethernet Controller PCIe x8 Gen.2 host interface Dual SFP+ connectors Compliant with VITA 42.0-2005, 42.3-2006 XMC specifications RoHS COMPLIANT 2002/95/EC Introduction The MIC-3666 is a low power, dual-port 10 GbE XMC, with SFP+ pluggable modules for multi-mode and single-mode fiber media and is based on the Intel® 82599ES 10 Gigabit Ethernet controller. The XMC provides a high performance PCIe x8 interface at 5 Gb/s per lane at an outstanding low power dissipation of less than 10W. Support for Intel®'s offloading and platform enhancement features yields maximum network throughput while preserving valuable CPU cycles for application processing. The MIC-3666 features an Intel® 82599 which provides Intel® Virtualization Technology for Connectivity (VT-c) including Virtual Machine Device Queues (VMDq) and PCI_SIG compliant Single Root I/O Virtualization (SR-IOV), helping to reduce I/O bottlenecks, boost throughput, and reduce latency. Where virtualization is required, VMDqs improve performance by offloading the data-sorting burden from the virtual machine manager (VMM) to the network controller. The MIC-3666's specialized features include Layer 2 & 3 security with IPSec & LinkSec; Intel I/OAT Acceleration Technology v3.0; VLAN tagging, stripping and packet filtering; and TCP, iSCSI, and Fiber Channel over Ethernet (FCoE) offload. Specifications XMC Connectivity Controller Connector Host interface Controller Virtualization Technologies IP Queues Offloading Security Acceleration I/O Software Power Environment Physical Characteristics Compliance SFP+ LEDs Linux Windows Boot Power Consumption Does not include FOT Transceivers P15 assembled, PCIe x8 gen.2 @ 5Gbps/lane Intel 82599ES dual 10GbE MAC/PHY VMDq, VMD, SR-IOV IPv4, IPv6 128RX, 128TX per port TCP, UDP, SCTP, FCoE Linksec IEEE802.1ae (AES-128 Authorization./Encryption) IPSec (AES-128, 1024 SA’s) 2 sites with support for presence detect, status and ID EEPROM Network Link, Activity X86 Kernel 2.6.x Server2003, Server2008 PXE, iSCSI +3.3V VPWR (+5V) 0.25A max Operating Temperature 0 ~ 60° C (32 ~ 140° F) Humidity 95 % @ 40° C, non-condensing Dimensions (W x D) 74 x 149 mm (2.9" x 5.78") Weight 0.104 kg (0.23 lbs) IEEE Std 1386.1-2001 PMC specification VITA 42.0-2005, 42.3-2006 XMC specifications 1.5A max Non-Operating -40 ~ 80° C (-40 ~ 176° F) 95 %@ 60° C, non-condensing Recommended Configurations XMC Extension Board MIC-3312-A1E CPU Board MIC-3393B-M2E, MIC-3395 Ordering Information Part Number MIC-3666-AE 11-34 Description XMC with dual SFP+ 10GbE interfaces CompactPCI Systems MIC-3666-AE MIC-3716 MIC-3714 MIC-3723 250 kS/s, 16-bit, 16-ch Multifunction 3U CompactPCI® Card 30 MS/s, 12-bit, Simultaneous 4-ch Analog Input 3U CompactPCI® Card 16-bit, 8-ch Analog Output 3U CompactPCI® Card MIC-3716/3 MIC-3714/3 Specifications Analog Input Channels 16 single-ended, 8 differential, or combination Resolution 16 bits Max. Sampling Rate 250 kS/s FIFO Size 1024 samples/ch Overvoltage Protection 30 Vp-p Input Impedance 100 MΩ/10 pF (Off); 100 MΩ/100 pF (On) Sampling Modes Software, pacer, or external Input Range Bipolar Unipolar Accuracy (% of FSR ±1LSB) ±10 0.15 ±5 0 ~ 10 0.03 ±2.5 0~5 0.03 ±1.25 0 ~ 2.5 0.05 ±0.625 0 ~ 1.25 0.1 Analog Output Channels2 Resolution 16 bits Output Rate Static update Output Range Internal Reference Bipolar Unipolar External Reference ±5, ±10 0 ~ 5, 0 ~ 10 0 ~ +x V @ +x v (-10 ≤ x ≤ 10) -x ~ +x V @ +x v (-10 ≤ x ≤ 10) Slew Rate 20 V/µs Driving Capability ±20 mA Output Impedance0.1 Ω max. Operation Mode Single output Accuracy Relative: ±1LSB Digital Input/Output Channels Input Voltage Output Voltage Output Capability 16, 5V/TTL Logic 0: 0.4 V max. Logic 1: 2.4 V min. Logic 0: 0.4 V max. Logic 1: 2.7 V min. Sink: 0.4 V max. @ +8 mA Source: 2.4 V min. @ -0.4 mA Counter/Timer Channels3 Compatibility 5 V/TTL Resolution 16 bits Max. Input Frequency 1 MHz Reference Clock Internal 10 MHz External Clock Frequency 10 MHz External Voltage Range TTL (Low: 0.8, High: 2 V) General PICMG Compliance CompactPCI V2.0, R 2.1 Hot-Swap V2.1, R 2.0 Bus TypeCompactPCI I/O Connector Type 68-pin SCSI-II female Dimensions (L x H) 160 x 100 mm (6.9" x 3.9") with 3U Bracket Power Consumption Typical: +5 V @ 850 mA, +12 V @ 600 mA Max.: +5 V @ 1 A, +12 V @ 700 m A CertificationsCE Specifications Specifications Analog Input Analog Output Channels Resolution Max. Sampling Rate Channels8 Resolution 16 bits Output Rate Static update 4 single-ended channels 12 bits 30 MS/s (Only in FIFO 32k) FIFO Size 32,768 samples/ch Overvoltage Protection 30 Vp-p Input Impedance50 Ω/1 MΩ/jumper selectable, 100 pF Sampling Modes Software, pacer, post-trigger, pre-trigger, delay-trigger, about-trigger Input Range (V) ±5, ±2.5, ±1, ±0.5 General Bus TypeCompactPCI I/O Connectors 4 x BNC connector (for AI) 1 x PS/2 connector (for ext. colock and trigger) Dimensions (L x H) 160 x 100 mm (6.3" x 3.9") with 3U bracket Power Consumption Typical: +3.3 V @ 550 mA , +5 V @ 150 mA , +12 V @ 600 mA Max.: +3.3 V @ 850 mA, +5 V @ 200 mA, +12 V @ 700 mA Operating Temperature 0 ~ 70° C (32~158° F) Storage Temperature -20 ~ 85° C (-4 ~ 185° F) Storage Humidity 5 ~ 95% RH, non-condensing (refer to IEC 68-2-3) Certifications CE, FCC Ordering Information MIC-3714/3 ADAM-3909 Ordering Information PCL-10901-1 MIC-3716/3 PCL-10901-3 PCLD-8710 PCL-10168 ADAM-3968 3U, 250 kS/s, 16-bit, 16-ch High-Resolution Multifunction Card Industrial Wiring Terminal Board with CJC circuit for DIN-rail Mounting. (cable not included) 68-pin SCSI-II cable with male connectors on both ends and special shielding for noise reduction, 1 and 2 m 68-pin SCSI-II Wiring Terminal Board for DIN-rail Mounting MIC-3723/3 PCL-1010B-1 3U, 30 MS/s Simultaneous 4-ch Analog Input Card DB-9 Wiring Terminal for DIN-rail Mounting PS2 to DB-9 wiring cable, 1m PS2 to DB-9 wiring cable, 3m BNC to BNC wiring cable, 1m Output Range Internal Reference Unipolar Current Loop (V, software programmable) ±10 V 0 ~ 20 mA, 4 ~ 20 mA Slew Rate 20 V/µs Driving Capability5mA Output Impedance0.1 Ω max. Operation Modes Single output, synchronized output Embedded Box PC 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 Digital Input/Output Channels Input Voltage Output Voltage Output Capability 16, 5V/TTL Logic 0: 0.8 V max. Logic 1: 2.0 V min. Logic 0: 0.5 V max. @ 24 mA Logic 1: 2.4 V min. @ -15 mA Sink: 0.5 V max. @ 24 mA Source: 2.4 V min. @ -15 mA Intelligent Video Platforms 10 CompactPCI 11 General PICMG Compliance CompactPCI V2.0, R 2.1 Hot-Swap V2.1, R 2.0 Bus TypeCompactPCI I/O Connector Type 68-pin SCSI-II female Dimensions (L x H) 160 x 100 mm (6.9" x 3.9") with 3UBracket Power Consumption Typical: 5 V @ 850, 12 V @ 600 mA CertificationsCE Ordering Information MIC-3723/3 MIC-3723R/3 PCL-10168-1 PCL-10168-2 ADAM-3968 Online Download www.advantech.com/products 3U CompactPCI 16-bit, 8-ch non-isolated analog output card 3U CompactPCI 16-bit, 8-ch non-isolated analog output card with Rear I/O support 68-pin SCSI-II cable with male connectors on both ends and special shielding for noise reduction, 1 and 2 m 68-pin SCSI-II Wiring Terminal Board for DIN-rail mounting 11-35 MIC-3753 MIC-3756 MIC-3758 MIC-3753R/3 Digital Input Interrupt Capable Ch. 72 (shared with output) 5 V/TTL Logic 0: 0.8 V max. Logic 1: 2.0 V min. 6 (2 for each C port) Digital Output Channels Compatibility Output Voltage Output Capability 64-CH Isolated Digital I/O 3U CompactPCI® Card 128-CH Isolated Digital I/O 3U CompactPCI® Card MIC-3753/3 Specifications Channels Compatibility Input Voltage 72-CH Digital I/O 3U CompactPCI® Card 72 (shared with input) 5 V/TTL Logic 0: 0.44 V max. @ 24 mA Logic 1: 3.76 V min. @ 24 mA Sink: 0.44 V max. @ 24 mA Source: 3.76 V min. @ 24 mA General MIC-3756/3 Specifications Specifications Isolated Digital Input Isolated Digital Input Channels32 Input Voltage Logic 0: 2 V max. Logic 1: 10 V min. (50 V max.) Interrupt Capable Ch. 2 (DI00, DI16) Isolation Protection 2,500 VDC Input Resistance5.7kΩ Channels64 Input Voltage Logic 0: 2.5 V max. Logic 1: 5 V min. (25 V max) Interrupt Capable Ch.64 Isolation Protection 2,500 VDC Opto-Isolator Response 50 μs Input Resistance 3 kΩ Isolated Digital Output Channels32 Output Type Sink (NPN) Isolation Protection 2,500 VDC Output Voltage 5 ~ 40 VDC Sink Current 100 mA max./channel Opto-Isolator Response OFF delay (±20%) 5 µs ON delay (±20%) 120 µs Photocouple Response Time PICMG Compliance CompactPCI V2.0, R 2.1 Hot-Swap V2.1, R 2.0 Bus TypeCompactPCI I/O Connectors 1 x 78-pin D-type female connector Dimensions (L x H) 160 x 100 mm (6.9" x 3.9") with 3UBracket Power Consumption Typical: +5 V @ 400 mA Max.: +5 V @ 0.7 A Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2) Operating Humidity 5 ~ 95% RH, noncondensing (refer to IEC 68-2-3) Storage Temperature -20 ~ 70° C (-4 ~ 158° F) CertificationsCE Ordering Information MIC-3753/3 MIC-3753R/3 PCL-10178-1 ADAM-3978 3U CompactPCI 72-ch Digital I/O card 3U CompactPCI 72-ch Digital I/O card with Rear I/O support DB-78 cable assembly, 1 m DB-78 wiring terminal for DIN-rail mounting Input Voltage 12 V 24 V 30 V 50 V CompactPCI Systems *OFF delay (±20%) 120 µs 140 µs 150 µs 200 µs *ON delay (±20%) 10 µs 5 µs 4 µs 4 µs General Isolated Digital output Channels64 Output Type Sink (NPN) Isolation Preoection 2500 VDC Output Voltage 5 ~ 40 VDC Sink Current 90 mA max./Channel Opto-isolator Response 50 μs General Bus Type I/O Connectors Dimensions (L x H) Power Consumption PICMG Compliance CompactPCI V2.0, R 3.0 Hot-Swap V2.1, R 2.0 Bus TypeCompactPCI I/O Connectors 1 x 78-pin D-type female connector Dimensions (L x H) 160 x 100 mm (6.9" x 3.9") with 3U Bracket Power Consumption Typical: 5 V @ 220 mA Max: 3.3 V @ 260 mA Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2) Operating Humidity 5 ~ 95% RH, noncondensing (refer to IEC 68-2-3) Storage Temperature -20 ~ 70° C (-4 ~ 158° F) CertificationsCE Ordering Information MIC-3756/3 PCL-10178-1 ADAM-3978 11-36 MIC-3758/3 3U 64-channel isolated digital I/O Card DB-78 cable assembly, 1 m DB-78 wiring terminal for DIN-rail mounting Operating Temperature Storage Temperature Storage Humidity CPCI bus spec. 2.1 compliant 1 x MINI-SCSII HDRA-E100 Female 160 x 100 mm (6.9" x 3.9") with 3U Bracket Typical : +5 V @ 800 mA, +3.3 V @ 600 mA Max : +5 V @ 1 A, +3.3 V @ 1 A 0 ~ 60° (32 ~ 140 °F) (IEC 68-2-1,2) -20° ~ 70 °C (-4° ~ 158 °F) 5 ~ 95% (IEC 68-2-3) non-condensing Ordering Information MIC-3758/3 PCL-101100S-1 ADAM-39100 3U CompactPCI 128-ch isolated Digital I/O card 100-pin SCSI Cable, 1 m 100-pin SCSI wiring terminal, DIN-rail mounting MIC-3761 MIC-3780 8-CH Relay & 8-CH Isolated Digital Input 3U CompactPCI® Card 8-CH, 16-bit Counter/Timer 3U CompactPCI® Card MIC-3761/3 MIC-3780/3 Specifications Specifications Isolated Digital Input Digital Input Channels8 Input Voltage Logic 0: 3 V max. Logic 1: 10 V min. (50 V max.) Input Current* 10 VDC 1.6 mA (typical) 12 VDC 1.9 mA (typical) 24 VDC 4.1 mA (typical) 48 VDC 8.5 mA (typical) 50 VDC 8.9 mA (typical) Interrupt Capable Ch. ID0 ~ ID7 Isolation Protection 3,750 VDC Overvoltage Protection 70 VDC Opto-Isolator Response 25 µs Input Resistance560 Ω Channels8 Compatibility 5 V/TTL Input Voltage Logic 0: 0.8 V max. Logic 1: 2.4 V min. Interrupt Capable Ch. 1 (channel 0) Channels 8 Relay Type SPDT (4 Form A, and 4 Form C) Contact Rating 3 A @ 250 VAC or 3 A @ 24 VDC Relay on Time 15 ms max. Relay off Time 5 ms max. Life Span Mechanical 2 x 107 ops. min. Electrical 2 x 105 ops. min. (contact rating) Resistance 1 GΩ min. (at 500 VDC) General PICMG Compliance CompactPCI V2.0, R 3.0 Hot-Swap V2.1, R 2.0, R 2.1 Bus TypeCompactPCI I/O Connectors 1 x 37-pin D-type female connector Dimensions (L x H) 160 x 100 mm (6.9" x 3.9") with 3U Bracket Power Consumption Typical: +5 V @ 220 mA Max.: +5 V @ 750 mA CertificationsCE Ordering Information MIC-3761/3 PCL-10137-1/2/3 ADAM-3937 PCLD-780 Channels8 Compatibility 5 V/TTL Output Voltage Logic 0: 0.5 V max. @ 24 mA Logic 1: 2.4 V min. @ -15 mA Output Capability Sink: 0.5 V max. @ 24 mA Source: 2.4 V min. @ -15 mA Counter/Timer Relay Output Digital Output 3U 8-ch Relay Actuator and 8-ch Isolated D/I Card DB-37 cable assembly, 1, 2 and 3 m DB-37 Wiring Terminal for DIN-rail Mounting Universal Screw Terminal Board Channels Resolution Compatibility Max. Input Frequency Reference Clock Counter Modes Interrupt Capable Ch. Embedded Box PC 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 Intelligent Video Platforms 10 CompactPCI 11 8 (independent) 16 bits 5 V/TTL 20 MHz Internal: 20 MHz 12 (programmable) 8 General PICMG Compliance CompactPCI V2.0, R 3.0 Hot-Swap V2.1, R 2.0 Bus Type CompactPCI V2.1 I/O Connectors 68-pin SCSI-II female Dimensions (L x H) 160 x 100 mm (6.3" x 3.9") with 3U Bracket Power Consumption Typical: +5 V @ 900 mA Max: +3.3 V @ 1.2 A Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2) Storage Temperature -20 ~ 70° C (-4 ~ 158° F) Relative Humidity 5 ~ 95 % RH non-condensing (refer to IEC 68-2-3) Certifications CE, FCC Class A Ordering Information MIC-3780/3 MIC-3780R/3 PCL-10168 ADAM-3968 3U Compact PCI 8-ch, 16 bit counter/timer card 3U Compact PCI 8-ch, 16 bit counter/timer card with Rear I/O support 68-pin SCSI-II cable with male connectors on both ends and special shielding for noise reduction, 1 and 2 m 68-pin SCSI-II Wiring Terminal Board for DIN-rail mounting Online Download www.advantech.com/products 11-37 MIC-3927 CompactPCI® Intel®ligent Chassis Management Module (PICMG® 2.9) Features Compatible with PICMG 2.1, 2.16, and 2.9-compliant components Monitors via the Intel®ligent Platform Management Bus (IPMB) protocol Provides isolated IPMI signals for each slot for maximum security and reliability Out-of band management interface Hot swap support for IPMI based field replaceable components Alarm cut off push button on the front panel Standalone system monitoring: no driver needed, independent OS RoHS COMPLIANT 2002/95/EC Introduction The MIC-3927 is a proprietary form factor Chassis Management Module (CMM) intended for use with PICMG* 2.1, 2.16, and 2.9-compliant systems (the CompactPCI* Hot Swap, Packet Switching Backplane, and System Management specifications respectively). The MIC-3927 plugs into a dedicated slot in compatible systems. It provides centralized management and alarm notification for system power supplies and fans as well as single board operation status. The CMM may be paired with a backup for high-availability applications. The MIC-3927 is essentially a special-purpose single board computer with a CPU, some memory, a PCI bus, an operating system and peripherals. The MIC-3927 monitors and configures IPMI-based components in the chassis. When the thresholds for temperature and voltage limitations are reached or when failure occurs, the CMM will capture an event. At the same time, the MIC-3927 sends SNMP traps and drives the Telco alarm relays that trigger onboard LEDs. The CMM can query FRU information (such as serial number, model number, manufacture date, etc.), detect presence of components (such as fan tray, CPU board, etc.), and monitor the status of each component. The MIC-3927 also has a built-in Web-based administration interface that allows users to monitor the system’s operation from any place with Internet connectivity. The MIC-3927 adds another dimension to the reliability of your most critical applications. *IPMI function only supported for MIC-3392 and MIC-3395 Sensor Specifications Voltage Temperature Fan Speed Power Good CPU Board Health Digital Input/Output (optional) 11-38 Input Input Sensor Interface Range Input Range Input Range Interface Input Max. SBC Monitoring Input Output CompactPCI Systems +3.3 VDC, +5 VDC, -5 VDC, +5 VSB, +12 VDC, -12 VDC, VBat 1 (onboard) Thermistor I2C -40 ~ 120° C (-40 ~ 248° F) 9 700 ~ 10000 rpm 4 High > 2.4 VDC, Low < 0.8 VDC I2C CPU VCore, CPU fan, CPU temperature (up to 2 CPUs), DC +5 V, DC -5 V, V (I/O), DC +12 V, DC -12 V 8 boards 4 4 MIC-3927 Hardware Specifications CPU Firmware Memory Interface Interface Baud Rate Buzzer support Time-out Signal for watchdog timer detection Charge Time Battery Type Capacity Battery Life Typical Processor System Ethernet Serial Port Miscellaneous Battery Power Requirement Environment Temperature Humidity Physical Characteristics Dimensions (W x D) RDC2880 2 MB Embedded Flash ROM 2 MB SRAM 10/100 Mbps RS-232 9600 bps Yes Yes 24 hr Ni-MH 1500 mA-H (full charged, for 15~20 minutes operation, depending on the system configuration) 80% capacity @ 20° C after 1000 cycles of charge and discharge 5 V @ 550 mA Operating Non-Operating 0 ~ 60° C (-32 ~ 140° F) -20 ~ 70° C (-4 ~ 158° F) 5 ~ 95 % RH, non-condensing Kernel module: 40.5 x 93 mm (1.6" x 3.7") Carrier module: 100 x 95 mm (3.9" x 3.7") Firmware Specifications System Status Monitoring and Management Alarm Notification Supported Protocol Management Function Real-time system status monitoring: provides real-time status display in HTTP/Java graphical format Monitor the temperature, fan speed and system voltage Alarm event record display E-mail: can setup up to 4 addresses to receive notification e-mails Audible alarm sound SMS support for receiving short message through mobile phone TCP, UDP, IP, ICMP, DHCP, BOOTP, ARP, SNMP, HTTP, Telnet Web-based remote configuration, control and monitor Firmware upgrade from serial port and Ethernet port Supports Time Sync with system board The SSL and SSH secure communications across Internet Ordering Information Part Number MIC-3927AE MIC-3927CE Embedded Box PC 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 Intelligent Video Platforms 10 CompactPCI 11 Description MIC-3927 alarm module for MIC-3056, MIC-3081 MIC-3927 alarm module for MIC-3042, MIC-3043 RS-232 COM port LAN port Onboard Battery Online Download www.advantech.com/products 11-39 MIC-3951 6U CompactPCI® Dual PMC or CMC Carrier Board (64-bit/66 MHz) Features 64-bit, 66 MHz CompactPCI® interface Supports dual PMC module Onboard PCI-to-PCI bridge Compliant with CMC specification RoHS COMPLIANT 2002/95/EC Introduction The MIC-3951 is a 6U CompactPCI carrier board for PCI Mezzanine Cards (PMC) modules. It provides two 64-bit PMC sites for easy CompactPCI system expansion through different PMC modules. An Intel ® 21154 PCI-to-PCI bridge chip is used in the MIC-3951 for CompactPCI bus expansion and decreases the CompactPCI bus loading to one, in addition to meeting industry requirements. Advantech provides several PMC modules that work in conjunction with the MIC-3951, such as the inclusive 10/100 Ethernet module and Gigabit module. In addition to being compatible with Advantech CompactPCI products, the MIC-3951 can also be used with other standardized, off-the-shelf modules from other manufacturers. Specifications Bus Power Environment Physical Characteristics Reliability Compliance PCI PCI-to-PCI Bridge Power Consumption From 32-bit/33 MHz up to 64-bit/66 MHz Intel 21154 2.2 W @ 64 bit/66 MHz (670 mA @ +3.3 V) Operating Temperature 0 ~ 60 °C (32 ~ 140 °F) Humidity Vibration (5 ~ 500 Hz) 1.0 Grms Dimensions (W x D) 233.35 x 160 mm (9.2" x 6.3"), 1-slot width Weight 0.5 kg (1.10 lb) Mean-Time-To-Repair (MTTR) 5 minutes PICMG 2.0 R3.0 CompactPCI Specification PICMG 2.3 R1.0 CompactPCI PMC I/O Mapping Specification IEEE P1386.1 R2.3 PMC Specification Non-Operating -20 ~ 80 °C (-4 ~ 176 °F) 5 ~ 95 % @ 60 C, non-condensing 2.0 G Recommended Configurations PMC Carrier Board MIC-3951 PMC Module MIC-3665-AE MIC-3665-BE Two PMC sites for PMC or CMC module Ordering Information Part Number MIC-3951-AE Description 6U CompactPCI dual PMC carrier board (64-bit/66 MHz) Note: Please contact your local distributor for more information on CMC solution 11-40 CompactPCI Systems PCI-to-PCI bridge MIC-3960 6U CompactPCI® Media Carrier Board Features Expands Advantech chassis MIC-3042B series chassis storage capacity Accommodates a slim CD-ROM Embedded Box PC 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 RoHS COMPLIANT 2002/95/EC Introduction The MIC-3960 is a 6U-high 1-slot CompactPCI media carrier board, with one slim CD-ROM. Designed to be highly cost-effective and simple to use, the MIC-3960 adds value to any CompactPCI system. It can easily expand storage capacity once placed in Advantech’s MIC-3042B series enclosures. Specifications Storage Space Power Environment Physical Characteristics Reliability Compliance Slim CD-ROM Power Consumption 1 1W Operating Temperature 0 ~ 60° C (32 ~ 122° F) Humidity Vibration (5 ~ 500 Hz) 1.0 Grms Dimensions (W x D) 233.35 x 160 mm (9.2" x 6.3"), 1-slot width Weight 0.5 kg (1.10 lb) Mean-Time-To-Repair (MTTR) 5 minutes PICMG 2.0 R3.0 CompactPCI Specification Non-Operating -40 ~ 60° C (-40 ~ 140° F) 95 % @ 60 °C, non-condensing 2.0 G Intelligent Video Platforms 10 CompactPCI 11 Recommended Configurations Enclosures MIC-3042B series Board MIC-3390, MIC-3392, MIC-3393 series Rear I/O Board RIO-3309, RIO-3310, RIO-3311 series Ordering Information Part Number MIC-3960-AE Storage space for a slim-type CD-ROM Description 6U CompactPCI media carrier board Online Download www.advantech.com/products 11-41 MIC-3961 6U CompactPCI® PCI Carrier Board Features 64-bit PCI interface 5 V only 33/66 MHz PCI clock selectable Hold-down bracket to secure PCI board RoHS COMPLIANT 2002/95/EC Introduction The MIC-3961 is a 6U CompactPCI® PCI carrier board that allows users to attach a 32/64-bit PCI card via a J1/J2 connector to a CompactPCI platform. The hold-down bracket secures the PCI card onto the carrier board and protects it against vibration and shock. In addition, the bracket allows a cable to be routed through the front slot panel. Specifications Bus Power Environment Physical Characteristics Reliability Compliance PCI Power Consumption 32-bit/33 MHz, 64-bit/66 MHz 1 W @ 33 MHz Operating Temperature 0 ~ 60° C (32 ~ 140° F) Humidity Vibration (5 ~ 500 Hz) 1.0 Grms Dimensions (W x D) 233.35 x 160 mm (9.2" x 6.3"), 1-slot width Weight 0.6 kg (1.32 lb) Mean-Time-To-Repair (MTTR) 5 minutes PICMG 2.0 R3.0 CompactPCI Specification Non-Operating -20 ~ 80° C (-4 ~ 176° F) 5 ~ 95 % @ 60° C, non-condensing 2.0 G Recommended Configurations PCI Carrier Board MIC-3961-AE Enclosure MIC-3042, MIC-3043 series Note: Because of the PCI slot form factor, it can not support 3.3 V PCI card. Ordering Information Part Number MIC-3961-AE Description 6U CompactPCI PCI carrier board Note: Please contact your sales distributor for the optional internal-to-panel cable adaptation assembly set. 11-42 CompactPCI Systems Removable slide card holder PCI connector 32-bit/33 MHz; 64-bit/66 MHz CompactPCI connector MIC-3001 4U CompactPCI® Enclosure with 8-Slot 3U Backplane Features 8-slot 3U CompactPCI® Easy installation: rack or panel mount Embedded Box PC 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 Hot swap compliant backplane Hot swap fan tray module Optional fault detection and alarm notification Logic ground and chassis ground can be isolated or common Specifications Backplane Device Bay Cooling Slots Bus Vio Voltage HDD or CD-ROM Fan Input Output Power Loading (A) Environment Physical Operating Temperature Storage Temperature Storage Humidity Dimensions (W x H x D) Weight Operating Vibration Reliability Shock MTBF (hours) Compliance PICMG Compliance 8 32-bit/33 MHz 3.3 V/5 V (short-bar selectable) Yes 2 (2 x 113 CFM) 90 ~ 132 VAC/180 ~ 264 VAC @ 47 ~ 63 Hz. 400 W Model Load +3.3 V +5 V Max. 20 42 MIC-3001 Min. 0.2 2.5 0 ~ 50° C (32 ~ 122° F) -40 ~ 80° C (-40 ~ 176° F) 10 ~ 90% @ 40° C, non-condensing MIC-3001/8 440 x 178 x 240 mm 7 kg (15.4 lb) 1.0 Grms w/CF disk 0.5 Grms w/3.5" HDD 10 G peak-to peak, 11ms duration 71174 hours PICMG 2.0, R 2.1CompactPCI Specification PICMG 2.1, R 1.0 Hot Swap Specification -5 V 1 0 +12 V 14 0.5 MIC-3001AR/8 440 x 178 x 283 mm 10 kg (22 lb) -12 V 1 0 +5 Vsb 0.75 0 Intelligent Video Platforms 10 CompactPCI 11 Ordering Information Part Number MIC-3001/84U MIC-3001AR/8 9663300100 9663300101 Description CompactPCI chassis with 8-slot backplane, fan tray module, and AC ATX power supply 4U CompactPCI chassis with 8-slot backplane, fan tray module, rear I/O and AC ATX power supply 3.5" FDD/HDD bracket accessory for MIC-3000 chassis 3U-4TE Blank Cover accessory for MIC-3000 chassis Online Download www.advantech.com/products 11-43 MIC-3002A 4U CompactPCI® Enclosure with 6-Slot 3U Backplane Features 6-slot 3U CompactPCI® backplane Compact size, 4U high enclosure for 3U cPCI modules Side handle design Stand feet on the bottom side for desktop applications Hot swap compliant backplane Logic ground and chassis ground can be isolated or common Specifications Slots Backplane Cooling System Power Supply Bus I/O Voltage Air Flow Life Span Input Output MTBF Max. Load Min. Load Reliability Temperature Humidity Vibration Shock Model Dimensions (W x H x D) (not inc.mnt flanges) Weight U Height (Slots) Mounting Options Enclosure Materials MTBF Compliance PICMG Compliance Environment Physical 6 CompactPCI slots (one system slot and 6 peripheral slots) 64-bit/33 MHz 3.3 V or 5 V, jumper selectable Two 46 CFM fans, 12 VDC brush less, dual ball bearing (with removable filter) 80,048 hours @ 25° C 100 ~ 240 VAC @ 47~63 Hz, full range 250 W ATX power supply 105,405 hours @ 25° C +5 V -5 V +12 V 24 0.5 12 3 0 2 Operating 0 ~ 60°C (32~140°F) 95% @ 60° C (140° F), non-condensing 0.5 Grms 20 G peak-to-peak, 11 ms duration MIC-3002A/6 220 x 190 x 245 mm (8.7" x 7.5" x 9.7") 5.6 kg (12.32 lb) for MIC-3002A 3U Wall, panel on front or rear side, desktop feet included Aluminum frame and galvanized sheet steel 87,191 hours @ 25° C PICMG 2.0, Ver. 3.0 CompactPCI PICMG 2.1, Ver. 2.0 Hot Swap Ordering Information Part Number MIC-3002A/6 1960002861 11-44 Description 4U CompactPCI chassis with 6-slot backplane 2.5" HDD support kit for anti-vibration for MIC-3002A/6 CompactPCI Systems -12 V +3.3 V 0.5 20 0 1 Storage -40 ~ 80° C (-40~112° F) 2.0 Grms +5 Vsb 1.5 0.1 MIC-3042 4U CompactPCI® Enclosure with cPCI Power Supply (CT Bus non-CT Bus or PICMG 2.16) Features 8-slot 6U CompactPCI® backplane AC cPCI 500 W + 250 W redundant (2+1) power supplies PICMG 2.16 (CompactPCI Packet Switching Backplane) compliance PICMG 2.5 (CompactPCI Computer Telephony) compliance Embedded Box PC 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 RoHS COMPLIANT 2002/95/EC Introduction The MIC-3042 is a 4U enclosure designed for standard cPCI power supplies. It is equipped with a cPCI 500 W redundant 2+1 power supply with hot-swap support. The system has 8 slots for CompactPCI boards and 6 slots for IEEE 1101.11 rear I/O transition boards. The MIC-3042 comes with a built-in high quality backplane that supports 64-bit / 66 MHz PCI cards. The standard configuration includes a H.110 CT Bus that complies with PICMG 2.5, which is the open architecture used to build telecom solutions. Specifications Backplane Cooling Power Supply Environment Physical Characteristics Reliability Serviceability Compliance MIC-3042A MIC-3042B MIC-3042C System x 1, Peripheral x 6, System x 1, Peripheral x 6, System x 1, Peripheral x 7, 6U Slot Switch x 1, Rear transition x 8 Media x 1, Rear transition x 7 Rear transition x 8 (80 mm, IEEE1101.11 compliant) (80 mm, IEEE1101.11 compliant) (80 mm, IEEE1101.11 compliant) Bus Up to 64-bit/66 MHz PCI bus H.110 CT Bus Yes Yes No V (I/O) +3.3 V/+5 V (selectable) Fan 2 (front: 193 CFM, rear: 61.3 CFM) Input AC 100 ~ 254 V @ 50 ~ 60 Hz, full range (MIC-3042X-A) Output AC cPCI 250 W redundant power module +3.3 V +5 V +12 V -12 V Max. Load 36 A 50 A 10 A 1A Min. Load 0A 2.0 A 0A 0A Operating Non-Operating Temperature 0 ~ 45° C (32 ~ 113° F) -20 ~ 60° C (-4 ~ 140° F) Humidity 20 ~ 90% @ 40° C, non-condensing 10 ~ 95% @ 40° C, non-condensing Shock 10 G 30 G Vibration (5 ~ 500 Hz) 1.0 Grms 2.0 G Dimensions (W x H x D) 440 x 177 x 320 mm (17.3" x 7" x 12.6") Weight 18 kg (39.7 lb) MTBF Backplane Fan module Power supply 800,000 hours 50,000 hours @ 25 °C 100,000 hours @ 70% load MTTR 5 minutes PICMG 2.0 R3.0 CompactPCI Specification PICMG 2.1 R2.0 CompactPCI Hot Swap Specification PICMG 2.5 R1.0 CompactPCI Computer Telephony Specification PICMG 2.11 R3.0 Front-Access Power Connectors Specification PICMG 2.16 R1.0 CompactPCI Packet Switching Backplane Specification (MIC-3042B, MIC-3042C are not compliant with PICMG 2.16) RoHS, CE, FCC, UL, CCC Online Download www.advantech.com/products Intelligent Video Platforms 10 CompactPCI 11 11-45 MIC-3042 Backplane Information Physical Number 8 7 6 5 4 3 2 1 Function Switch slot I/O slot I/O slot I/O slot I/O slot I/O slot I/O slot System slot Physical Number 8 7 6 5 4 3 2 1 MIC-3042A, PICMG 2.16 / CT backplane (for MIC-3042A series) Function I/O slot I/O slot I/O slot I/O slot I/O slot I/O slot System slot Media blade slot Physical Number 8 7 6 5 4 3 2 1 MIC-3042B, CT backplane (for MIC-3042B series) Function I/O slot I/O slot I/O slot I/O slot I/O slot I/O slot I/O slot System slot MIC-3042C, non-CT backplane (for MIC-3042C series) Recommended Configurations Enclosure MIC-3042AE MIC-3042A-AE MIC-3042BE MIC-3042B-AE CPU Board Rear I/O Board MIC-3392A-MxE, MIC-3392B-MxE, MIC-3392A2-MxE, MIC-3392B2-MxE, MIC-3392LE RIO-3310S-A2E, RIO-3310BE MIC-3392A-MxE, MIC-3392B-MxE, MIC-3392A2-MxE, MIC-3392B2-MxE, MIC-3392LE MIC-3395A1-M4E, MIC-3395A2-M4E, MIC-3395B1-M4E MIC-3395C1-M4E MIC-3042CE MIC-3042C-AE Chassis Management Module Included MIC-3924L-AE or Optional MIC-3927CE RIO-3310S-A2E, RIO-3310BE RIO-3315-A1E, RIO-3315-B1E, RIO-3315-C1E Ordering Information Part Number PICMG 2.16 PICMG 2.5 PCI Switch Board Support Media Blade Support MIC-3042AE Yes Yes Yes Yes - Chassis Management Module MIC-3924L-AE MIC-3042A-AE Yes Yes Yes Yes - MIC-3924L-AE MIC-3042BE - Yes Yes - Yes MIC-3924L-AE MIC-3042B-AE - Yes Yes - Yes MIC-3924L-AE MIC-3042CE - - Yes - - MIC-3924L-AE MIC-3042C-AE - - Yes - - MIC-3924L-AE cPCI Power Supply AC cPCI 500 W + 250 W redundant (2+1) AC cPCI 500 W + 250 W redundant (2+1) AC cPCI 500 W + 250 W redundant (2+1) Optional Accessories Part Number 1757000190G MIC-3927CE Description One AC cPCI 250 W redundant power module MIC-3927 intelligent chassis management module (IPMI) LED board Hot-swappable 193-CFM fan module AC cPCI 500 W + 250 W redundant (2+1) power supplies 11-46 CompactPCI Systems Built-in alarm board (MIC-3924L-AE) Hot-swappable rear fan Supports IEEE 1101.11 rear I//O transition boards MIC-3043 4U CompactPCI® Enclosure with cPCI Power Supply and Removable HDD Bay (CT Bus or Non-CT Bus) Features NEW 6-slot 6U CompactPCI® backplane (CT or Non-CT Bus) Supports removable HDD bays (up to 2 3.5” SATA or up to 4 2.5” SATA/SAS drives) Built-in SATA slim-type DVD-RW/RAM AC cPCI 250 W + 250 W redundant (1+1) or 500W+250W (2+1) power supplies Supports hot-swappable fan modules PICMG 2.5 (CompactPCI Computer Telephony) compliance (MIC-3043D) Embedded Box PC 1 Pre-configured Systems 2 Industrial Computer Chassis 3 Slot SBC & Passive Backplanes 4 Industrial Motherboards 5 Industrial Computer Peripherals 6 Server-grade IPCs 7 Fanless and Multi-functional Panel PCs 8 Industrial Tablet PCs & Handheld Terminals 9 Built-in alarm module (MIC-3924L-AE) RoHS COMPLIANT 2002/95/EC Introduction The MIC-3043 is a 4U enclosure designed for mission-critical and high-reliability applications such as Networking, Telecommunication, Computer Telephony Integration, and Image Processing. It is equipped with a hot-swappable CompactPCI redundant power supply and hot-swappable fan modules to minimize MTTR (Mean-Time-to-Repair). The MIC-3043 supports six 6U CompactPCI blades and rear I/O transition boards. Users can route I/O signals to the rear transition boards for simplified system cabling. Front boards and RTMs can be swapped in and out the system without powering down. The MIC-3043 has removable SATA /SAS HDD bays and one slim DVD-RW as standard. The MIC-3043 has a high-quality backplane with impedance controlled design that supports 64-bit / 66 MHz cards. The H.110 CT Bus complies with PICMG 2.5, which is an open architecture ideal for telecom solutions. Specifications Backplane Cooling Drive Bay Management Interface Power Supply Reliability Environment Physical Characteristics Compliance MIC-3043D MIC-3043E MIC-3043F System x 1, Peripheral x 5, Rear transition x 6 (80 mm, IEEE1101.11 compliant) Yes 32-bit/33 MHz, 64-bit/66 MHz CompactPCI Rev. 3.0, PICMG2.9 +3.3 V/+5 V (selectable) 2 (front: 193 CFM, rear: 61.3 CFM) 2 (3.5" SAS/SATA) 2 (3.5" SAS/SATA) 4 (2.5" SAS /SATA or SSD)* 1 1 1 2 (fan failure and system overheating) AC 100 ~ 240 V @ 50 ~ 60 Hz, full range (MIC-3043X-XX) AC cPCI 250 W redundant power module (1+1 configuration) +3.3 V +5 V +12 V -12 V Max. Load 36 A 50 A 10 A 1A Min. Load 0A 2.0 A 0A 0A MTBF Backplane Power supply FAN 800,000 hours 100,000 hours @ 70% 80000 hours @ 40° C Operating Non-Operating Temperature 0 ~ 45° C, (32 ~ 113° F) -20 ~ 60° C, (-4 ~ 140° F) Humidity 10 ~ 95% @ 40° C, non-condensing Shock 10 G 30 G Vibration (5 ~ 500 Hz) 1.0 Grms* 2.0 G Dimensions (W x H x D) 440 x 177 x 320 mm (17.3" x 7" x 12.6") Weight 18 kg (39.7 lb ) PICMG 2.0 R3.0 CompactPCI Specification PICMG 2.1 R2.0 CompactPCI Hot Swap Specification PICMG 2.11 R3.0 Front-Access Power Connectors Specification PICMG 2.5 R1.0 CompactPCI Computer Telephony Specification (MIC-3043D only) RoHS, CE, FCC, UL, CCC 6U Slot H.110 CT Backplane Backplane V (I/O) Fan HDD Slim DVD-RW/RAM Alarm Indicators Input Output Intelligent Video Platforms 10 CompactPCI 11 *Note: Tested with SSD in MIC-3043F. Online Download www.advantech.com/products 11-47 MIC-3043 Backplane Information Physical Number 6 5 4 3 2 1 MIC-3811, CT Bus backplane (for MIC-3043D) MIC-3812, non-CT Bus backplane (for MIC-3043E, MIC-3043F) Function I/O slot System slot I/O slot I/O slot I/O slot I/O slot Recommended Configurations Enclosure MIC-3043DE MIC-3043D-BE MIC-3043EE MIC-3043E-BE MIC-3043FE (Preliminary) MIC-3043F-BE CPU Board MIC-3392A-MxE, MIC-3392B-MxE, MIC-3392A2-MxE, MIC-3392B2-MxE, MIC-3392LE MIC-3392A-MxE, MIC-3392B-MxE, MIC-3392A2-MxE, MIC-3392B2-MxE, MIC-3392LE MIC-3392A-MxE, MIC-3392B-MxE, MIC-3392A2-MxE, MIC-3392B2-MxE, MIC-3392LE MIC-3393A-M2E MIC-3393B-M2E MIC-3393C-M2E MIC-3393D-M2E MIC-3395A1-M4E MIC-3395A2-M4E MIC-3395B1-M4E MIC-3395C1-M4E Rear I/O Board Chassis Management Module RIO-3310S-A1E, RIO-3310S-A2E, RIO-3310AE, RIO-3310BE RIO-3310AE, RIO-3310S-A2E, RIO-3310S-A1E, RIO-3310BE RIO-3310AE, RIO-3310S-A2E, RIO-3310S-A1E, RIO-3310BE RIO-3311-A1E RIO-3311-A2E RIO-3313-A1E RIO-3315-A1E RIO-3315-B1E RIO-3315-C1E Included MIC-3924L-AE Optional MIC-3927CE Ordering Information Part Number MIC-3043D2E MIC-3043D2-BE MIC-3043E2E MIC-3043E2-BE PICMG 2.5 Yes Yes - MIC-3043FE - MIC-3043F-BE - HDD Bay 3.5" SATA x 2 3.5" SATA x 2 3.5" SATA x 2 3.5" SATA x 2 2.5" SATA/SAS HDD/SSD x4 2.5" SATA/SAS HDD/SSD x4 Media Support Slim DVD-RW/RAM Slim DVD-RW/RAM Slim DVD-RW/RAM Slim DVD-RW/RAM Chassis Management Module MIC-3924L-AE MIC-3924L-AE MIC-3924L-AE MIC-3924L-AE cPCI Power Supply Hot-swap AC cPCI 250 W + 250 W Hot-swap AC cPCI 250 W + 250 W Slim DVD-RW/RAM MIC-3924L-AE - Slim DVD-RW/RAM MIC-3924L-AE Hot-swap AC cPCI 250 W + 250 W Note: Please contact your local distributor to order AC 500W + 250W (2+1) redundant power suppliers. Optional Accessories Part Number 1757000190G MIC-3927CE Description AC cPCI 250 W redundant power module MIC-3927 Intelligent chassis management module (IPMI) Built-in alarm module (MIC-3924L-AE) Hot-swappable rear fan 11-48 Supports IEEE 1101.11 rear I/O transition boards CompactPCI Systems Two hot-swappable SATA HDD bays 6-slot 6U cPCI backplane AC cPCI 500 W + 250 W redundant (2+1) power supplies One slim-type CD-ROM Hot-swappable 193-CFM fan module