3 U CompactPCI Backplane with 6 Slots State of the art design for a wide range of applications General Description Features This standard backplane is member of the ERNI backplane familiy for use in Compact PCI computer systems. Its highperformance features make it ideally suited for telecom, datacom, and industrial applications like CNCs, robotic controls, and video image processing. • Form factor 3 U Dimension (WxH): 120.6 mm x 128.7 mm • 6 slots, 5 peripheral slots; system slot on left side • Operates at 33 MHz clock frequency • Full 64-bit implementation • Controlled impedance of 65 Ohm realized by striplinetechnology • Best decoupling of supply voltages • High-quality design with best EMC-characteristics by fully shielded 10-layer PCB • Best decoupling of supply voltages • Connectors according to IEC 61076-4-101 and PICMG 2.0 • V(I/O) selectable by wiring: 3.3 V or 5 V • Power supply connection via Faston or M4 screw • Auxilliary signals accessible at 5-pin header ERNI develops and manufactures backplanes according to ISO 9001 at three productions sites around the world. Custom and semi-custom designs based on our standard backplanes are possible in various configurations. Part No: 073615 www.ERNI.com/contact/ Catalog E 074502 10/01 Edition 2 Power for GND, +12V, -12V by Fastons or M4 screw +5V +5V +5V +5V GND VIO +5V VIO DEG# +3,3V +3,3V PRS# +3,3V +3,3V FAL# Rear view Auxiliary signals +5V +3,3V VIO 3U Backplane +3,3V CompactPCI +5V VIO -12V -12V GND GND +12V Made in -12V GND +12V +12V -12V +12V VIO Germany Power for GND, +12V, -12V by Fastons or M4 screw Front view z a b c d e f 22 Printed in Germany · Subject to modification without prior notice. CompactPCI 64-Bit Bus 1 25 CompactPCI 32-Bit Bus 1 2 1 3 4 5 6 System Slot www.ERNI.com/contact/ Catalog E 074502 10/01 Edition 2 3 U CompactPCI Backplane with 6 Slots State of the art design for a wide range of applications General Description Features This standard backplane is member of the ERNI backplane familiy for use in Compact PCI computer systems. Its highperformance features make it ideally suited for telecom, datacom, and industrial applications like CNCs, robotic controls, and video image processing. • Form factor 3 U Dimension (WxH): 120.7 mm x 128.7 mm • 6 slots, 5 peripheral slots; system slot on right side • Operates at 33 MHz clock frequency • Full 64-bit implementation • Controlled impedance of 65 Ohm realized by stripline-technology • Best decoupling of supply voltages • High-quality design with best EMC-characteristics by fully shielded 10-layer PCB • Connectors according to IEC 61076-4-101 and PICMG 2.0 • V(I/O) selectable by wiring: 3.3 V or 5 V • Power supply connection via Faston or M4 screw • Auxilliary signals accessible at 5-pin header ERNI develops and manufactures backplanes according to ISO 9001 at three productions sites around the world. Custom and semi-custom designs based on our standard backplanes are possible in various configurations. Part No: 073638 www.ERNI.com/contact/ Catalog E 074509 10/01 Edition 1 Rear view Auxiliary signals Power for +5V, +3.3V, V(I/O) Power for GND, +12V, -12V 120,7 Front view Printed in Germany · Subject to modification without prior notice. 22 128,7 CompactPCI 64-Bit Bus 1 25 CompactPCI 32-Bit Bus 1 System Slot www.ERNI.com/contact/ Catalog E 074509 10/01 Edition 1 3 U CompactPCI Backplane with 6 Slots State of the art design for a wide range of applications General Description This standard backplane is member of the ERNI backplane familiy for use in Compact PCI computer systems. Its highperformance features make it ideally suited for telecom, datacom, and industrial applications like CNCs, robotic controls, and video image processing. ERNI develops and manufactures backplanes according to ISO 9001 at three productions sites around the world. Custom and semi-custom designs based on our standard backplanes are possible in various configurations. Part No: 073918 Features • Form factor 3 U Dimension (WxH): 131.1 mm x 128.7 mm www.ERNI.com/contact/ Catalog E 074528 10/01 Edition 1 • 6 slots, 5 peripheral slots; system slot on right side • Operates at 33 MHz clock frequency • 4 slots full 64-bit implementation, 2 slots 32-bit implementation • Rear I/O via P2 of physical slots 1 and 2 • AB-shrouds with guides for safe mating of rear I/O transition modules • Controlled impedance of 65 Ohm realized by striplinetechnology • Hot-swap features according to PICMG 2.0 R3.0 and PICMG 2.1 R1.0 • Best decoupling of supply voltages • High-quality design with best EMC-characteristics by fully shielded 10-layer PCB • Flexible grounding to chassis by fixing screws • Connectors according to IEC 61076-4-101 and PICMG 2.0 R3.0 • V(I/O) selectable by jumper element: 3.3 V or 5 V • 1 connector for fan with 12 V supply • ATX connector for Power supply • Auxilliary signals accessible via headers Auxiliary signals Rear Panel I/O Rear view ATX Power Supply connector V(I/O)-selection Connector for Power On Connector for Fan Connector for LED indicator 131,1 Front view 22 Printed in Germany · Subject to modification without prior notice. CompactPCI 64-Bit Bus 128,7 Rear Panel I/O 1 25 CompactPCI 32-Bit Bus 1 System Slot www.ERNI.com/contact/ Catalog E 074528 10/01 Edition 1 3 U CompactPCI Backplane with 6 Slots State of the art design for a wide range of applications General Description Features This standard backplane is member of the ERNI backplane familiy for use in Compact PCI computer systems. Its highperformance features make it ideally suited for telecom, datacom, and industrial applications like CNCs, robotic controls, and video image processing. • Form factor 3 U Dimension (WxH): 120.9 mm x 128.7 mm • 6 slots, 5 peripheral slots; system slot on left side • Operates at 33 clock frequency • Full 64-bit implementation • Controlled impedance of 65 Ohm realized by striplinetechnology • Hot-swap features according to PICMG 2.0 R3.0 and PICMG 2.1 R1.0 • Best decoupling of supply voltages • High-quality design with best EMC-characteristics by fully shielded 10-layer PCB • Flexible grounding to chassis by fixing screws • Connectors according to IEC 61076-4-101 and PICMG 2.0 R3.0 • V(I/O) selectable by bus bar: 3.3 V or 5 V • Power supply connection via M4 screw on busbar • Auxilliary signals accessible at headers ERNI develops and manufactures backplanes according to ISO 9001 at three productions sites around the world. Custom and semi-custom designs based on our standard backplanes are possible in various configurations. Part No: 163105 www.ERNI.com/contact/ Catalog E 074522 10/01 Edition 1 Power for +5V, +3.3V, V(I/O) Rear view Auxiliary signals +5V +5V +3.3V VIO +5V +3.3V VIO +5V Power for GND, +12V, -12V Auxiliary signals 120.9 Front view 22 Printed in Germany · Subject to modification without prior notice. 128.7 CompactPCI 64-Bit Bus 1 25 CompactPCI 32-Bit Bus 1 System Slot www.ERNI.com/contact/ Catalog E 074522 10/01 Edition 1 3 U CompactPCI Backplane with 6 Slots State of the art design for a wide range of applications General Description This standard backplane is member of the ERNI backplane familiy for use in Compact PCI computer systems. Its highperformance features make it ideally suited for telecom, datacom, and industrial applications like CNCs, robotic controls, and video image processing. ERNI develops and manufactures backplanes according to ISO 9001 at three productions sites around the world. Custom and semi-custom designs based on our standard backplanes are possible in various configurations. • • • • • • • • • • • Part No: 193918 • • Features • • • • Form factor 3 U Dimension (WxH): 131.1 mm x 128.7 mm www.ERNI.com/contact/ Catalog E 074529 10/01 Edition 1 6 slots, 5 peripheral slots; system slot on right side Operates at 33 MHz clock frequency 32-bit implementation Rear I/O via P2 on all slots AB-shrouds with guides for safe mating of rear I/O transition modules Controlled impedance of 65 Ohm realized by striplinetechnology Hot-swap features according to PICMG 2.0 R3.0 and PICMG 2.1 R1.0 Best decoupling of supply voltages High-quality design with best EMC-characteristics by fully shielded 10-layer PCB Flexible grounding to chassis by fixing screws Connectors according to IEC 61076-4-101 and PICMG 2.0 R3.0 V(I/O) selectable by jumper element: 3.3 V or 5 V 1 connector for System Management Bus according to PICMG2.9 R1.0 1 connector for fan with 12 V supply ATX connector for Power supply Auxilliary signals accessible via header Auxiliary signals V(I/O)-selection Rear view ATX Power Supply connector Rear Panel I/O on all Slots Connector for Fan Connector for System Management Bus IPMBO 131.1 Front view 22 Printed in Germany · Subject to modification without prior notice. 128.7 Rear Panel I/O 1 25 CompactPCI 32-Bit Bus 1 System Slot www.ERNI.com/contact/ Catalog E 074529 10/01 Edition 1