MIC-3393 6U CompactPCI Intel® Xeon® Quad/ Dual Core Processor Blade Features NEW Supports 45 nm Intel® Xeon® Low Voltage/Ultra Low Voltage processor Intel® 5100MCH chipset supports 1066/1333 MHz FSB Up to 4 GB (DDR2 533/667) ECC memory Optimized design in one or two slots SBC with USB Flash Drive, and 2.5" SATA HDD/CompactFlash socket Optional Extension Module on 8HP version supports two XMCs, PMCs or 2.5" SATA HDDs TPM, three GbE ports, six SATA ports, four USB 2.0 ports, one VGA port, three RS-232 ports, one PS/2 connector, and PCIe x1, PCIe x4 interfaces to the Rear Transition Module (RTM) Built-in Intel® I/OAT technology for enhanced I/O performance PICMG 2.16 R1.0, PICMG 2.9 R1.0, PICMG 2.1 R2.0 compliant RoHS COMPLIANT 2002/95/EC Introduction Experience true server class performance on CompactPCI. Using Intel 45nm 64-bit Xeon technology with up to four cores at 2.33 GHz combined with the powerful San Clemente chipset, the MIC-3393 blade boosts computing and I/O performance deploying the latest virtualization, multi-threading and I/OAT acceleration techniques. Enhanced Xeon® packaging, front side bus parity, onboard, soldered DRAM with ECC support and RASUM features integrated in the 5100 MCH combined with PICMG2.9, IPMI-based management make the MIC-3393 a highly available and reliable high performance computing engine. The comprehensive I/O subsystem includes an onboard USB flash disk, a 2.5" SATA HDD or CompactFlash slot, three advanced Gigabit Ethernet controllers, two UARTs, USB ports and a TPM. The addition of PCIe links to the RTM further enhances versatility compared to previous generation blades resulting in best-in-class connectivity. The RIO-3311 RTM module supports one PS/2 connector with both keyboard and mouse ports, three USB ports, two RS-232 ports, 2 SATA ports, a PCIe based server graphics controller with VGA port, a USB port for USB NAND flash module, and alternate cabling for the three Gigabit Ethernet ports of the MIC-3393. In case the SATA disk drives and SATA RAID support of the ICH9R do not meet performance and reliability requirements, the RIO-3311 SAS version supports a 4-port SAS controller with RAID and failover support. The MIC-3393 is outfitted with single slot (4HP) or dual slot (8HP) front panels to match CPU performance, CPU power dissipation, and system cooling capabilities. The 8HP version of the blade can be extended with a MIC-3312 mezzanine module which can carry two XMCs/PMCs or two 2.5" SATA HDDs to support enhanced I/O modularity and additional mass storage options. Specifications Processor System Memory CompactPCI Interface Ethernet Graphics (on RTM) Storage CPU Chipset Front Side Bus BIOS Technology Max. Capacity Socket J1~J2 Connectors J3 Connector J5 Connector Bridge Mode Controller Interface I/O Connector Controller Interface I/O Connector Controller Resolution Type Channels Type Channels All product specifications are subject to change without notice Quad-Core/Dual-Core Intel® Xeon® processor LV or Dual-Core Intel® Xeon® processor ULV up to 2.66 GHz Intel® 5100MCH/ICH9R (San Clemente) 1066/1333 MHz with parity protection Redundant AMI 2MByte SPI flash Dual channel DDR2 533/667 MHz with ECC 2 GB onboard, max. 4 GB total SORDIMM x2 64-bit/66 MHz PCI local bus + RTM PICMG2.16 + RTM RTM Pericom PI7C9X130DNDE + PLX PCI 6540CB Sytem Master/Drone (Stand alone) 2 Intel® 82574L single-port Gigabit Ethernet controllers 10/100/1000Base-TX Ethernet PICMG2.16 x 1, RJ-45 x1 or RTM x 2 Intel® ICH9R MAC and Intel® 82566DM Gigabit Ethernet PHY 10/100/1000Base-TX Ethernet RJ-45 x 1 or RTM x 1 XGI Volari Z11 PCIe Server graphics with 32 MB VRAM Up to 1600 x 1200, 64k hi-color at 70Hz SATA-II 1 channel. to onboard SATA HDD carrier or CF disk carrier 2 channels. to RTM 2 channels to extension module (8HP only) USB 1 to onboard 1 GB flash disk Last updated : 27-Oct-2009 MIC-3393 Specifications USB 2.0 COM LAN Front Panel LEDs Buttons USB COM LAN SATA PCIe Others CMOS Boot options Console others Output Interval Controller Controller Compatibility Configuration TDP (max./typ.) Front I/O Rear I/O BIOS Watchdog Timer Hardware Monitor BMC Operating System Power Requirement Physical 2 type A 1 RS-232 on RJ-45 2 10/100/1000 Mbps on RJ-45 x 1 blue/yellow for Hot Swap/HDD, x 1 green for Master/Drone, x 1 yellow BMC Heartbeat, and x 1 green for Power CPU and BMC reset buttons 4 ports 2 ports 3 10/1000/1000 Mbps 2 ports 1 PCIe x 1, 1 PCIe x 4 PS/2 for keyboard & mouse Battery backed up with backup copy in EEPROM SATA, SAS, USB ports, USB flash disk, network (PXE) VGA or console redirection over COM Port, SoL supported by BMC Supports operation without disk, keyboard, video Local Reset and Interrupt Programmable 1s ~ 255s Winbond® 83627DHG: voltages, CPU, chipset, board temperature Renesas® H8S 2167, IPMIv2.0 compliant Windows® XP 32/64 bit, Linux 4HP 8HP 60W / <50W 90W / <75W 6U /1 slot width (4HP), 233.35 x 160 x 20 mm (9.2" x 6.3" x 0.8"), 1.03 kg (2.27lb) 6U /2 slots width (8HP), 233.35 x 160 x 40 mm (9.2" x 6.3" x 1.6"), 1.42kg (3.14lb) Operating Non-operating 0 ~ 55° C (32 ~ 122° F) -40 ~ 85° C (-40 ~ 185° F) 95 %@ 40° C, non-condensing 95 %@ 60° C, non-condensing 5-500Hz, 2Grms 5 ~ 500Hz, 3.5Grms 15G, 6ms (without on-board 2.5" SATA HDD) 4,000m above sea level FCC Class A, CE, RoHS Designed for GR-63-CORE and GR-1089-CORE PICMG2.0 R3.0, PICMG2.1 R2.0, PICMG2.9 R1.0, PICMG2.16 R1.0 Dimensions & Weight Temperature Humidity Vibration Bump Altitude Conformance NEBS Level 3 Standards Environment Regulatory Compliance Supported CPU Configurations Intel CPU Model Number CPU architecture # cores Freq. Cache FSB CPU TDP L5408 L5238 L5215 L3014 Harpertown (45 nm) Wolfdale (45 nm) Wolfdale (45 nm) Wolfdale (45 nm) 4 2 2 1 2.13 GHz 2.66 GHz 1.86 GHz 2.4 GHz 12 MB 6 MB 6 MB 3 MB 1066 MHz 1333 MHz 1066 MHz 1066 MHz 40W 35W 20W 30W Required airflow for single slot width 50CFM 40CFM 20CFM 50CFM* Required airflow for dual slot width 30CFM 25CFM 15CFM 30CFM *Note: These CPUs support extended case temperature and are qualified for NEBS environments **Note: Strong airflow required for the L3014 CPU is restricted to its thermal specification (Tc 60° C) Recommended Configurations CPU Board MIC-3393A Series MIC-3393B, MIC-3393C Series Extension Module MIC-3312-A1E, MIC-3312A-A2E Rear I/O Board RIO-3311-A1E, RIO-3311-A2E RIO-3311-A1E, RIO-3311-A2E Enclosure MIC-3042, MIC-3043 Series MIC-3042, MIC-3043 Series Ordering Information Front Panel LAN COM USB XMC/PMC Knockout MIC-3393A-M2E 2 1 2 MIC-3393B-M2E 2 1 2 2 MIC-3393C-M2E 2 1 2 *Note: Use of single rank, dual die package stack (3.8 mm) SORDIMM is advised **Note: CF board is included as accessory System Board RTM Model Number Main On-board Features SATA HDD Socket CF Socket 1 1 1 1 1 1 Memory 2 GB 2 GB 2 GB Rear Panel LAN COM VGA PS/2* USB RIO-3311-A1E 3 2 1 1* 2 RIO-3311-A2E 3 2 1 1* 2 *Note: One PS/2 port carries the signals for both K/B and mouse. Y cable is included. **Note: Use of Advantech EmbCore USB 2.0 Disk Module (Type C) recommended Slot Width 1 2 2 On-board Header/Socket/Connector SAS (SATA SATA Slot Width interface) 2 4 1 2 1 MiniSAS USB USB Flash** Conn. 1 - 1 1 1 J1,J3,J5 J1,J3,J5 Online Download www.advantech.com/products MIC-3393 Board Diagram DDR2 SODIMM 533/667 ECC FSB DDR2 onboard 533/667 ECC DDR2 SODIMM 533/667 ECC San Clemente PCIe2 PCI-X +12V, +5V, +3.3V PCIex4 PCIex8 Extension Module XTM (8HP only) SATA-II (2x) USB 2.0 (2x) SMB Flash disk HWM / Sensors PCIex1 SATA-II (2x) USB 2.0 (4x) USB 2.0 LPC ICH9R BMC SuperIO UART (2x) TPM User LEDs UART (2x) to RTM From SuperIO SATA-II User + Reset buttons i82566 J5 J3 MUX Lattice FPGA LFXP2 UART (2x) PS/2 (KB/MS) UART (2x) i82574L SPI 2MByte LOM RS-232 from FPGA to FPGA MUX PCIex1 PCIex1 UART, BUS IF Hot Swap Controller Channel 1 ICS Clock generator I2C J1/J2 PCI-X 64/66 PCIex4 DDR2 onboard 533/667 ECC All platform clocks PCI-X 64/66 PLX6540 Intel Xeon SC/DC/QC 52xx/53xx 54xx series Channel 0 Handle SW JMicro SATA2 PATA PATA Compact Flash USB 2.0 USB 2.0 SATA-II Hard Disk Drive Adapter, CF and HDD are mutually exclusive Ordering Information XTM Model Number MIC-3312-A1E MIC-3312-A2E On-board Header/Socket/Connector SATA HDD 2 XMC/PMC 2 - One SATA HDD/ CompactFlash socket Two RJ-45 Gigabit LAN ports One RJ-45 COM port Two XMC/PMC knockouts (MIC-3393B only) Memory DIMM sockets One passive North Bridge heatsink One passive CPU heatsink All product specifications are subject to change without notice Two USB 2.0 ports Last updated : 27-Oct-2009