MIC-5322 AdvancedTCA® 10GbE Dual Socket CPU Blade with Intel® Xeon® 5500 Series Processor Features NEW Two Dual-Core or Quad-Core Intel® Xeon 5500 processor (Nehalem-EP) Intel® 5520 IOH36D/ICH10R server class chipset 6 DDR3 VLP DIMMs up to 48 GB with ECC support Two XAUI ports on Fabric interface Two 1000BASE-T ports on Base interface Two 1000BASE-T front panel ports Two USB2.0 front panel ports Fully managed, hot swappable RTM RoHS COMPLIANT 2002/95/EC Introduction The MIC-5322 is a dual processor Intel® Xeon® 5500-based ATCA blade complementing the single processor MIC-5320 for systems able to cool over 200W per-slot. The underlying architecture and drivers remain identical to the MIC-5320 thereby enhancing performance scalability and streamlining software re-use between blades. The MIC-5322 enables the highest performance available in ATCA form factor with 8-cores and 16-threads of processing power, low DDR3 memory latency, fast PCI Express 2.0 and accelerated virtualization,. The Intel 82599 10 GbE controller plays a key role in end-to-end network performance and throughput, including a 5 Gbps PCI Express 2.0 interface to improve the entire data path as well as multi-core optimized queue support. For fast and secure database applications, the blade supports up to 48 GB of triple channel DDR3 with ECC. Next generation processor readiness offers a smooth upgrade path to future processors supporting more than 4 cores. The MIC-5322 adheres to Advantech’s Common rear transition modules (RTM) definition developed to maximize interoperability and re-use between RTM’s and ATCA blades. This defines the management interface and RTM port mapping for interconnects such as USB, PCIe, XAUI and SAS and allow RTM re-use among blades to simplify system integration as well as life cycle and upgrade management. The MIC-5322 provides hot-swappable RTM support for High Availability(HA) needs as well as rear I/O and SAS storage support with RAID via the RTM-5101. Dual bootable USB industrial flash drives add capabilities for emergency and parameters storage, diagnostic routines and minimum kernel needs, whilst a CompactFlash socket is available for True IDE mode flash usage. Serial over LAN (SoL) support is provided on the base fabric and external GbE. HPM.1 based updates are available for all programmable components including rollback support and IPMI controlled BIOS write protect through a single update procedure. CMOS Override capabilities allow CMOS RAM to be altered over IPMI and settings can be changed from multiple sources. MAC address mirroring allows the MAC address to be read over IPMI even if the processor is powered down and helps to relate MAC address and physical/logical board location. Additional support is provided for Intel PECI, application driven event logging and FRU EEPROM space is reserved for ODM use. On-board FPGA design facilitates customer-specific modifications and the core board design can be modified or adapted to other form factors through Advantech’s D&MS customization services Six DDR3 VLP DIMMs ZD Connectors Intel 1GbE/10GbE base to RTM and fabric interfaces Two 10/100/1000BASE-T ports miniUSB console port Six DDR3 VLP DIMMs User/Status LEDs Two USB ports RJ-45 console port MIC-5322 Specifications Processor System Bus Memory Zone 2 Front I/O Interface Operating System IPMC Watchdog Timer Miscellaneous Zone 3 (RTM) Physical Characteristics Environment Compliance CPU Max. Speed Chipset BIOS QPI Technology Max. Capacity Socket Fabric interface Base interface Serial (COM) Ethernet USB 2.0 Compatibility BMC Controller IPMI Hardware Monitor Supervision Interval Solid State Disk LED Indicators Storage Real Time Clock RTM Interface Dimensions (W x D) Weight Temperature Humidity Shock Vibration (5 ~ 100 Hz) Environment PICMG Safety & EMC L5518 (4C/8T) or E5540 (4C/8T) Intel Nehalem processor 2.53 GHz Intel IOH36D/ICH10R Dual 16-Mbit BIOS firmware flashes with AMI embedded BIOS 5.86 GT/s Triple channel DDR3 1066 MHz SDRAM (72-bit ECC Un-/Registered) Configurable up to 48 GB 6 VLP DIMMs i82599 Dual 10GE MAC/PHY supporting two 10GBase KX4 ports (XAUI) i82576 PCIe dual GbE MAC/PHY supporting two 10/100/1000 Mbps ports 2 x86 Serial Ports (1 RJ-45, 1 USB slave) 2 10/100/1000BASE-T through PCIe based i82576 MAC/PHY, 1 10/100/1000 Mbps Chipset LAN 2 Type A ports WindRiver PNELE2.0, Linux, PNELE3.0 in preparation, Windows Server 2003 Renesas H8S/2166 Compliant with IPMI 1.5 using Pigeon Point System® (PPS) Solution NuvoTon W83795ADG 1 BMC, 1 x 86 BIOS POST, OS Boot, Application IPMI compliant Two 1 GB USB flash disks onboard 12 Onboard CF Disk, 2 x internal and external SAS drives through RTM module Built-in Advantech common RTM interface Type 1 3PCIe x 4, 2 x SATA, 2 x SGMII, 2 x USB, 2 x UART, SGPIO 6HP, 294.56 x 322.25 mm (11.60" x 12.69") 2.545 kg Operating Non-operating 0 ~ 55° C (32 ~ 131° F) - 40 ~ 70° C (-40 ~ 158° F) 5 to 93% @ 40° C (non condensing) 95% @ 40° C (non-condensing) 4 G each axis 20 G each axis 0.1 Grms 2G ETSI EN300019-2-1 Class1.2, EN300019-2-2 Class 2.3, ETSI EN300019-2-3 Class 3.1E 3.0 R3.0, 3.1 R1.0, HPM.1 CB report (IEC60950-1), CE mark (EN60950-2001), UL60950-1/CSAC22.2 FCC47 CFR Part15, Class B, CE Mark (EN55022/EN55024/EN300386) Designed to meet GR1089-CORE Notes: Maximum power consumption information: 1. MIC-5322-P1 with 12 GB memory: 180W 2. MIC-5322-P2 with 12 GB memory: 220W Ordering Information Model number MIC-5322-P1 MIC-5322-P2 Related Products Configuration 10GbE Ethernet fabric interface, Dual Intel Xeon L5518 CPUs, no memory, no CF disk 10GbE Ethernet fabric interface, Dual Intel Xeon E5540 CPUs, no memory, no CF disk Model number RTM-5101 Configuration RTM Module (hosts LSi1064e SAS controller and two hotswappable SAS HDD and rear panel IO connectors) Online Download www.advantech.com/products