Crane Aerospace & Electronics Microwave Solutions 0° Dividers/Combiners - PDM-20-250 SQ Technical Feature features • Space Qualified • 10 - 500 MHz • 2 Way SMA PERFORMANCE Description Frequency Range..............................................10 - 500 MHz Isolation.......................................................................25 min. Insertion Loss......................................0.5 dB (10 - 400 MHz) ..........................................................0.6 dB (400 - 500 MHz) Amplitude Balance.............................................. 0.2 max. dB VSWR Input/Output................................................1.3:1 max. The PDM-20-250 SQ In-Phase Power Divider/Combiner covers 10 - 500 MHz. It uses a lumped circuit technology design which provides high isolation and low VSWR.This device has been designed in accordance with Merrimac document CENG-0001, “Standard Design Requirements for Space Qualified Devices” Phase Balance.................................................................... 2° CW Input with Load VSWR 1.2:1..................................... 1 W Impedance.........................................................50 Ohm nom. Operating Temperature................................... -55° to +85° C PACKAGE OUTLINE Crane Aerospace & Electronics Microwave Solutions – Merrimac Industries 41 Fairfield Place, West Caldwell, NJ 07006 + 1.973.575.1300 ext. 1309 • [email protected] www.craneae.com/mw PDM-20-250 SQ - Rev. 6, 08/29/2008 DS_Power Divider_PDM20250Q_082908.doc. This revision supersedes all previous releases. All technical information is believed to be accurate, but no responsibility is assumed for errors. We reserve the right to make changes in products or specifications without notice. Copyright © 2012 Crane Electronics, Inc. All rights reserved.