Crane Aerospace & Electronics Microwave Solutions Ku-Band 2-Way Iso-Divider TECHNICAL FEATURE FEATURES Light Weight and Small Size Broadband Low Insertion Loss Extremely High Isolation Space Qualified Also available as an Iso-Combiner PERFORMANCE DESCRIPTION Frequency ..................................................... 10.7 - 14.8 GHz The Iso-Divider product represents a marriage of Crane Return Loss (Input & Output) .................................20 dB min Electronics’ Passive and Ferrite products. It is a higher Isolation between Outputs......................................36 dB min isolation power divider, which removes the need for Insertion Loss (above 3.0 dB theoretical) ...........1.8dB max additional components and connectors. Removing these Phase Balance .........................................................+5 ° max components improves the reliability and allows the Power Handling ........................................................2 W max electrical performance to be enhanced. Magnetic Emission .......................................... 0.5 Am 2 max EMI Shielding........................................................ -80 dBi min This product provides the ability for a Satellite receiver or RF Connection Interface ...................................SMA Female transmitter Operating Temperature Range......................... -55 to +85°C configuration. This is a critical function, which demands Package Size........................................ 1.56” X 1.01” X 0.56” low insertion loss and exceptional performance. Matching to share antennas in a redundant the power divider and isolator characteristics allows the best overall unit performance to be achieved. Functional Diagram Crane Aerospace & Electronics Microwave Solutions – Signal Technology 340 North Roosevelt Avenue, Chandler, AZ 85226 +1.480.961.6269 [email protected] www.craneae.com/mw Page 1 of 1 Iso Divider Rev. AB - 072415 DS_Iso_Divider_MW_072415.doc. This revision supersedes all previous releases. All technical information is believed to be accurate, but no responsibility is assumed for errors. We reserve the right to make changes in products or specifications without notice. Copyright © 2015 Crane Electronics, Inc. All rights reserved.