Preliminary Data Sheet PS2561F-1,PS2561FL-1 DIP PHOTOCOUPLER, OPERATING AMBIENT TEMPERATURE 110°C <R> R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 DESCRIPTION The PS2561F-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor. The PS2561F-1 is in a plastic DIP (Dual In-line Package) and the PS2561FL-1 is lead bending type (Gull-wing) for surface mount. FEATURES <R> <R> • • • • • • • • Operating ambient temperature: 110°C High Isolation voltage (BV = 5 000 Vr.m.s.) High collector to emitter voltage (VCEO = 80 V) High current transfer ratio (CTR = 450% TYP.) High-speed switching (tr = 5 μs TYP., tf = 7 μs TYP.) Embossed tape product: PS2561FL-1-F3 : 2 000 pcs/reel Pb-Free product Safety standard • UL approved: No. E72422 PIN CONNECTION (Top View) 4 3 1 2 1. Anode 2. Cathode 3. Emitter 4. Collector APPLICATIONS <R> • • • • Power meter Telephone/FAX. FA/OA equipment Programmable logic controller The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 Page 1 of 13 PS2561F-1,PS2561FL-1 <R> Chapter Title PACKAGE DIMENSIONS (UNIT: mm) DIP Type PS2561F-1 4.6±0.35 6.5±0.5 4 3 1 2 3.5±0.3 3.2±0.4 4.15±0.4 7.62 0 to 15° +0.1 0.25 –0.05 1.25±0.15 0.50±0.10 0.25 M 2.54 Lead Bending Type PS2561FL-1 4.6±0.35 3 1 2 0.9±0.25 9.60±0.4 1.25±0.15 0.25 M 2.54 <R> 0.1 +0.1 –0.05 3.5±0.3 0.25 +0.1 –0.05 6.5±0.5 4 0.15 PHOTOCOUPLER CONSTRUCTION Parameter Air Distance (MIN.) Outer Creepage Distance (MIN.) Inner Creepage Distance (MIN.) Isolation Distance (MIN.) R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 PS2561F-1, PS2561FL-1 7 mm 7 mm 4 mm 0.4 mm Page 2 of 13 PS2561F-1,PS2561FL-1 <R> Chapter Title MARKING EXAMPLE No. 1 pin Mark R 2561F KR131 K R Company Initial Type Number Assembly Lot 1 31 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Pb-Free and Halogen Free <R> Made in Japan Made in Taiwan New PKG R Y ORDERING INFORMATION Part Number Order Number PS2561F-1 PS2561FL-1 PS2561FL-1-F3 PS2561F-1Y-A PS2561FL-1Y-A PS2561FL-1Y-F3-A Note: Solder Plating Specification Pb-Free and Halogen Free Packing Style Magazine case 100 pcs Embossed Tape 2 000 pcs/reel Safety Standard Approval Standard products (UL approved) Application *1 Part Number PS2561F-1 PS2561FL-1 *1. For the application of the Safety Standard, following part number should be used. R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 Page 3 of 13 PS2561F-1,PS2561FL-1 Chapter Title ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Reverse Voltage Forward Current (DC) Power Dissipation Derating Power Dissipation Peak Forward Current*1 Transistor Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 Operating Ambient Temperature Storage Temperature Diode <R> Symbol VR IF ΔPD/°C PD IFP VCEO VECO IC ΔPC/°C PC BV TA Tstg Ratings 6 30 1.5 150 1 80 7 50 1.5 150 5 000 −55 to +110 −55 to +150 Unit V mA mW/°C mW A V V mA mW/°C mW Vr.m.s. °C °C Notes: *1. PW = 100 μs, Duty Cycle = 1% *2. AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together. R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 Page 4 of 13 PS2561F-1,PS2561FL-1 <R> Chapter Title ELECTRICAL CHARACTERISTICS (TA = 25°C) Parameter Forward Voltage Reverse Current Terminal Capacitance Diode Symbol VF IR Ct Conditions IF = 10 mA VR = 5 V V = 0 V, f = 1.0 MHz IF = 0 mA, VCE = 80 V MIN. 300 60 1011 Transistor Collector to Emitter Dark Current ICEO Coupled Current Transfer Ratio *1 (IC/IF) CTR Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time*2 Fall Time*2 VCE (sat) IF = 5 mA, VCE = 5 V IF = 1 mA, VCE = 5 V IF = 10 mA, IC = 2 mA RI-O CI-O tr tf VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 10 V, IC = 2 mA, RL = 100 Ω Notes: *1. CTR rank CTR Rank K CTR (%) TYP. 1.2 MAX. 1.4 5 100 Unit V μA pF nA 600 % 0.3 V 10 450 0.5 5 7 18 18 Ω pF μs Conditions 300 to 600 IF = 5 mA, VCE = 5 V 60 and larger IF = 1 mA, VCE = 5 V *2. Test circuit for switching time Pulse Input VCC Input PW = 100 μ s Duty Cycle = 1/10 ton IF 50 Ω td VOUT RL = 100 Ω toff ts 90% Output 10% tr R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 tf Page 5 of 13 PS2561F-1,PS2561FL-1 TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 150 100 1.5 mW/°C 50 0 25 50 75 100110 125 100 1.5 mW/°C 50 25 50 100110 125 75 150 Ambient Temperature TA (°C) Ambient Temperature TA (°C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 25 IF = 5 mA TA = +100°C +60°C +25°C Collector Current IC (mA) Forward Current IF (mA) 50 150 0 150 100 10 5 0°C –25°C –55°C 1 0.5 20 4 mA 15 3 mA 10 2 mA 5 1 mA 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 0 1.5 0 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 100 100 000 IF = 10 mA 10 000 Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) <R> Chapter Title VCE = 80 V 48 V 24 V 10 V 5V 1 000 100 10 1 −50 −25 0 25 50 75 100 Ambient Temperature TA (°C) 5 mA 10 2 mA 1 mA 1 0.1 0 0.2 0.4 0.6 0.8 1.0 Collector Saturation Voltage VCE (sat) (V) Remark The graphs indicate nominal characteristics. R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 Page 6 of 13 PS2561F-1,PS2561FL-1 Chapter Title CURRENT TRANSFER RATIO vs. FORWARD CURRENT 600 1.4 Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 1.2 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25°C, IF = 5 mA, VCE = 5 V CTR = 430% CTR = 480% 0.2 0 −50 −25 0 25 50 75 Sample A 500 B 400 300 200 100 0 0.01 100 Ambient Temperature TA (°C) 1 10 100 Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE SWITCHING TIME vs. LOAD RESISTANCE 100 1 000 IC = 2 mA, VCC = 10 V, CTR = 430% IF = 5 mA, VCC = 5 V, CTR = 430% tf tr Switching Time t ( μ s) Switching Time t ( μ s) 0.1 10 td ts 1 0.1 10 100 1 000 10 000 Load Resistance RL (Ω) tf 100 ts 10 tr 1 0.1 0.1 td 1 10 100 Load Resistance RL (kΩ) FREQUENCY RESPONSE Normalized Gain GV (dB) 5 0 −5 −10 −15 −20 IF = 5 mA, VCC = 5 V, RL = 100 Ω, CTR = 430% −25 0.1 1 10 100 1 000 Frequency f (kHz) Remark The graphs indicate nominal characteristics. R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 Page 7 of 13 PS2561F-1,PS2561FL-1 Chapter Title FALL TIME vs. AMBIENT TEMPERATURE *1 RISE TIME vs. AMBIENT TEMPERATURE *1 1 000 1 000 10 kΩ 1 kΩ 100 100 Fall Time tf ( μ s) Rise Time tr ( μ s) PS2561F-1 (CTR = 410%) PS2501-1 (CTR = 380%) 1 kΩ RL = 510 Ω 10 10 RL = 510 Ω 1 1 PS2561F-1 (CTR = 410%) PS2501-1 (CTR = 380%) 10 kΩ 0.1 −50 −25 0 25 50 75 0.1 −50 100 −25 0 25 50 STORAGE TIME vs. AMBIENT TEMPERATURE *1 DELAY TIME vs. AMBIENT TEMPERATURE *1 1 000 1 000 PS2561F-1 (CTR = 410%) PS2501-1 (CTR = 380%) 10 kΩ 100 Storage Time ts ( μ s) Delay Time td ( μ s) 100 Ambient Temperature TA (°C) Ambient Temperature TA (°C) RL = 510 Ω, 1 kΩ, 10 kΩ 10 1 0.1 −50 75 −25 0 25 50 75 100 10 1 kΩ RL = 510 Ω 1 PS2561F-1 (CTR = 410%) PS2501-1 (CTR = 380%) 0.1 −50 100 −25 0 25 50 75 100 Ambient Temperature TA (°C) Ambient Temperature TA (°C) *1 Test circuit for switching time above Pulse Input Vin (high) = 5 V VCC = 5 V VCC PW = 100 μ s Duty cycle = 1/10 Input ton IF In monitor td VOUT 510 Ω toff ts RL 90% Output 10% tr tf Remark The graphs indicate nominal characteristics. R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 Page 8 of 13 PS2561F-1,PS2561FL-1 TAPING SPECIFICATIONS (UNIT: mm) 1.55±0.1 4.5 MAX. 10.3±0.1 1.5 +0.1 –0 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 7.5±0.1 4.0±0.1 5.3±0.1 8.0±0.1 0.4 Tape Direction PS2561FL-1-F3 Outline and Dimensions (Reel) 2.0±0.5 R 1.0 φ 21.0±0.8 φ 100±1.0 2.0±0.5 φ 13.0±0.2 φ 330±2.0 <R> Chapter Title 17.5±1.0 21.5±1.0 Packing: 2 000 pcs/reel R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 15.9 to 19.4 Outer edge of flange Page 9 of 13 PS2561F-1,PS2561FL-1 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) C D B <R> Chapter Title A Part Number PS2561FL Lead Bending lead bending type (Gull-wing) for surface mount R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 A B C D 9.2 2.54 1.7 2.2 Page 10 of 13 PS2561F-1,PS2561FL-1 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220°C • Time to preheat temperature from 120 to 180°C • Number of reflows • Flux 260°C or below (package surface temperature) 10 seconds or less 60 seconds or less 120±30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (°C) <R> Chapter Title (heating) to 10 s 260°C MAX. 220°C to 60 s 180°C 120°C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux 260°C or below (molten solder temperature) 10 seconds or less 120°C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron • Peak Temperature (lead part temperature) 350°C or below • Time (each pins) 3 seconds or less • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (4) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 Page 11 of 13 PS2561F-1,PS2561FL-1 Chapter Title 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 Page 12 of 13 PS2561F-1,PS2561FL-1 Caution GaAs Products Chapter Title This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth. R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 Page 13 of 13 Revision History PS2561F-1,PS2561FL-1 Data Sheet Rev. Date Page 0.01 1.00 Dec 22, 2010 Jan 06, 2012 − Throughout Throughout Throughout p.1 p.3 p.3 p.4 p.5 pp.6 to 8 p.9 p.10 p.11 Description Summary First edition issued Preliminary Data Sheet -> Data Sheet Safety standards approved Deletion of the descriptions for PS2561FL1-1,PS2561FL2-1 Modification of APPLICATIONS Modification of MARKING EXAMPLE Addition of ORDERING INFORMATION Modification of ABSOLUTE MAXIMUM RATINGS IC Modification of ELECTRICAL CHARACTERISTICS tr, tf Addition of TYPICAL CHARACTERISTICS Addition of TAPING SPECIFICATIONS Modification of RECOMMENDED MOUNT PAD DIMENSIONS Modification of NOTES ON HANDLING All trademarks and registered trademarks are the property of their respective owners. C-1 Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics 7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. http://www.renesas.com SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics America Inc. 2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A. Tel: +1-408-588-6000, Fax: +1-408-588-6130 Renesas Electronics Canada Limited 1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada Tel: +1-905-898-5441, Fax: +1-905-898-3220 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-585-100, Fax: +44-1628-585-900 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Düsseldorf, Germany Tel: +49-211-65030, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. 7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898 Renesas Electronics Hong Kong Limited Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2886-9318, Fax: +852 2886-9022/9044 Renesas Electronics Taiwan Co., Ltd. 13F, No. 363, Fu Shing North Road, Taipei, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632 Tel: +65-6213-0200, Fax: +65-6278-8001 Renesas Electronics Malaysia Sdn.Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics Korea Co., Ltd. 11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 © 2012 Renesas Electronics Corporation. All rights reserved. Colophon 1.1