High Ohmic Value Surface Mount Resistors Tin Lead Termination HOW TO ORDER CRHS 10- 107 K M Packaging M = 7” Reel B = Bulk Case Tolerance (%) P = +50 M = +20 N = +30 K = +10 J = +5 G = +2 F = +1 FEATURES EIA Resistance Code Three digits for > 5% tolerance Four digits for 1% tolerance Size 05 = 0402 16 = 0603 Stringent specs in terms of reliability, stability, and quality. Available in sizes as small as 0502 10 = 0805 18 = 1206 Resistance Range up to 150 Gig ohms 14 = 1210 12 = 2010 01 = 2512 E-24 and E-96 Series Low Voltage Coefficient of Resistance Series High ohm chip resistors Wrap Around Terminal for Solder Flow Termination Sn/Pb SCHEMATIC CRHS CRHS-A, CRHS-B Overcoat Conductor Termination Material: Sn/Pb Ceramic Substrate Resistive Element DIMENSIONS (mm) Series Size L W t a CRHS05 0402 1.0 ± 0.05 0.50 ± 0.05 0.35 ± 0.05 0.20 ± 0.1 0.25 CRHS05B 0402 CRHS16 CRHS16A Package Qty +0.05 -0.10 +0.05 -0.10 1.0 ± 0.05 0.50 ± 0.05 0.30 ± 0.05 0.20 ± 0.1 0.25 1.60 ± 0.15 0.80 ± 0.15 0.45 ± 0.10 0.30 ± 0.20 0.30 ± 0.20 1.60 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 0.20 ± 0.10 0.20 ± 0.10 CRHS16B 1.60 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 0.30 ± 0.20 0.30 ± 0.20 CRHS10 2.10 ± 0.15 1.25 ± 0.15 0.55 ± 0.10 0.40 ± 0.20 0.40 MAX CRHS10A 0603 b 2.00 ± 0.20 1.25 ± 0.20 0.50 ± 0.10 0.40 ± 0.20 0.40 ± 0.20 CRHS10B 2.00 ± 0.20 1.25 ± 0.10 0.50 ± 0.10 0.40 ± 0.20 0.40 ± 0.20 CRHS18 3.10 ± 0.15 1.55 ± 0.15 0.55 ± 0.10 0.50 ± 0.20 0.50 MAX 3.20 ± 0.20 1.60 ± 0.20 0.55 ± 0.10 0.50 ± 0.30 0.50 ± 0.30 +0.05 -0.15 0.60 ± 0.10 0.50 ± 0.25 0.50 ± 0.20 CRHS18A 0805 1206 CRHS18B 3.20 +0.05 -0.20 1.60 10,000 10,000 5,000 5,000 5,000 CRHS14 1210 3.10 ± 0.15 2.65 ± 0.15 0.55 ± 0.10 0.50 ± 0.20 0.50 MAX 5,000 CRHS12 2010 5.10 ± 0.15 2.60 ± 0.15 0.55 ± 0.10 0.80 ± 0.20 0.80 MAX 4,000 6.40 ± 0.15 3.10 ± 0.15 0.55 ± 0.10 0.80 ± 0.20 1.30 MAX 6.40 ± 0.20 3.2 ± 0.20 0.55 ± 0.10 0.50 ± 0.30 0.50 ± 0.30 CRHS01 CRHS01A 2512 American Accurate Components, Inc. 188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 Email: [email protected] 4,000 1 High Ohmic Value Surface Mount Resistors Tin Lead Termination ELECTRICAL CHARACTERISTICS Voltage (Max.)* Series Size Resistance Range by Tolerance& TCR (ppm/°C) Rated Power Working Overload Operating Temperature ±1% ±5% ±10% ±20% ±500 ppm +400 ~ -100 ppm ±500 ppm ±500 ppm CRHS05 0402 1/20 w 25 V 50 V -55 ~ +155°C 10M ~ 100M 10M ~ 30M 10M ~ 100M CRHS16 0603 1/16w 50 V 100 V -55 ~ +155°C 10M ~ 100M 10M ~ 100M 10M ~ 470M 110M ~ 1.0G CRHS10 0805 1/10w 150 V 300 V -55 ~ +155°C 10M ~ 100M 10M ~ 100M 10M ~ 470M 110M ~ 1.0G CRHS18 1206 1/8w 200 V 400 V -55 ~ +155°C 10M ~ 100M 10M ~ 100M 10M ~ 470M 110M ~ 1.0G CRHS14 1210 1/4w 200 V 400 V -55 ~ +155°C 10M ~ 100M 10M ~ 100M 10M ~ 470M 110M ~ 1.0G CRHS12 2010 1/2w 200 V 400 V -55 ~ +155°C 10M ~ 100M 10M ~ 100M 10M ~ 470M 110M ~ 1.0G CRHS01 2512 1w 200 V 400 V -55 ~ +155°C 10M ~ 100M 10M ~ 100M 10M ~ 470M 110M ~ 1.0G Series Size Rated Power Working Overload Operating Temperature ±1%, ±2% CRHS16A 0603 1/32w 50V 100V -55 ~ 125°C 1.0M ~ 50M CRHS10A 0805 1/16w 75 V 150 V -55 ~ +125°C CRHS18A 1206 1/8w 150 V 300 V -55 ~ +125°C CRHS01A 2512 1w 300 V 500 V -55 ~ +125°C Series Size Rated Power Voltage (Max.)* Resistance Range by Tolerance & TCR (ppm/°C) ±5% ±10% ±20 1M ~ 1G 1M ~ 1G 1.1G ~ 100G 1.0M ~ 50M 1M ~ 1G 1M ~ 1G 1.1G ~ 100G 1.0M ~ 50M 1M ~ 1G 1M ~ 1G 1.1G ~ 100G 1M ~ 1G 1M ~ 1G 1.1G ~ 100G ±100 ppm Voltage (Max.)* ±250 ppm ±1500 ppm Resistance Range by Tolerance & TCR (ppm/°C) Working Overload Operating Temperature ±5%, ±10%, ±20% ±500 ppm ±1500 ppm CRHS05B 0402 1/16w 50 V 100 V -55 ~ +125°C CRHS16B 0603 1/16w 50 V 100 V -55 ~ +125°C 10M ~ 100M 43M ~ 1.0G CRHS10B 0805 1/10w 150 V 300 V -55 ~ +125°C 43M ~ 1.0G 1.2G ~ 10G CRHS18B 1206 1/8w 200 V 400 V -55 ~ +125°C 43M ~ 1.0G 1.2G ~ 10G * Rated Voltage = DERATING CURVE If the ambient temperature exceeds 70°C, then the rated power must be derated according to the power derating curve shown to the right. PERFORMANCE Test Item Long Term Stability Test Conditions Test Results ±100ppm parts > ±100ppm parts Normal temperature and humidity for 1,000 hours ±0.5% ±0.5% High Temperature Loading DC15V, 1.5 hours on, 0.5 hours off, 1,000 hours at 70°C ±0.5% ±1.0% Resistance to Soldering Heat 260°C + 5°C for 10+1-0 seconds ±0.5% ±1.0% Short Time Overload Test for 5 seconds using maximum Overload Voltage ±0.5% ±1.0% Operating Temperature Range Refer to electrical charachteristics The content of this specification may change without notification 05/15/2015 American Accurate Components, Inc. 188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 Email: [email protected] 2