Power Semiconductor Product Guide 2014 Contents IGBT Modules 1200V IGBT Modules Choppers, dual switches and single switches 1700V IGBT Modules Bi-directional switches, choppers, dual switches, half bridges and single switches 3300V IGBT Modules Choppers, dual switches, half bridges and single switches 4500V IGBT Modules Choppers, Single switches 6500V IGBT Modules Choppers, Single switches FRD Modules 1200V FRD Modules Dual Diodes and Triple Diodes 1800V FRD Modules Dual Diodes and Triple Diodes 3300V FRD Modules Dual Diodes, Triple Diodes and Series Pair Diodes 4500V and 6500V FRD Modules Dual Diodes, Choppers and Triple Diodes Phase Control Thyristors Disc Devices Pulsed Power Thyristors Pulsed Power Thyristors Rectifier Diodes Disc Devices Fast Recovery Diodes 2 2 3-4 5 5 6 6 7 7 8-9 10 11 Disc Devices 12 Disc Devices - Asymmetric Types Disc Devices - Reverse Blocking Types 12 12 Gate Turn-off Thyristors Package Outlines IGBT Modules FRD Modules Thyristor & Diode GTO 13-14 15 16 17 Overview including Assemblies, AC Switches, Heatsinks and Sub-contract Partnerships 18-19 Power Assemblies Symbols and Definitions 20 1 IGBT Modules 1200V IGBT Modules Part Number AlSiC baseplate Configuration at TC (°C) VCE (sat) @ Tc=25°C (V) Total Esw Rth(j-c) Baseplate @ (per switch) Dims Tc=125°C (°C/kW) (mm) (mJ) Isolation Voltage DIM2400ESM12-A Single 2400 85 2.2 800 6 190x140 4kV DIM1600FSM12-A Single 1600 85 2.2 500 9 140x130 4kV DIM1800ESM12-A DIM1200FSM12-A Single Single DIM800FSM12-A Single DIM600DDM12-A Dual DIM800DDM12-A DIM400DDM12-A DIM800DCM12-A Copper baseplate Dual Dual Chopper 1800 1200 85 85 800 85 600 85 800 400 800 85 85 85 2.2 570 2.2 2.2 2.2 140x130 4kV 280 18 140x130 4kV 120 2.2 4kV 12 200 2.2 190x140 400 280 2.2 8 280 18 24 36 18 140x130 140x130 140x130 140x130 4kV 4kV 4kV 4kV DIM2400ESS12-A Single 2400 85 2.2 800 6 190 x 140 4 kV DIM1600FSS12-A Single 1600 85 2.2 500 9 140x130 4kV DIM1800ESS12-A DIM1200FSS12-A DIM800FSS12-A DIM800DDS12-A DIM600DDS12-A DIM400DDS12-A DIM800DCS12-A Single Single Single Dual Dual Dual Chopper 1700V IGBT Modules Part Number DNPT range DIM2400ESM17-A Configuration Single 1800 1200 800 800 600 400 800 IC (A) 2400 85 85 85 85 85 85 85 at TC (°C) 75 2.2 570 2.2 2.2 2.2 VCE (sat) @ Tc=25°C (V) 2.7 4kV 280 18 140x130 4kV 120 2.2 280 1950 1600 75 2.7 1250 DIM800FSM17-A Single 800 75 2.7 DIM600DDM17-A Dual 600 75 DIM800DDM17-A DIM400DDM17-A Dual Dual 1200 800 400 DIM1600ECM17-A Chopper 1600 DIM600DCM17-A Chopper 600 DIM800DCM17-A DIM400DCM17-A DIM400PHM17-A DIM400PBM17-A Chopper Chopper Half Bridge Bi-directional 800 400 400 400 75 75 75 75 75 75 75 75 75 2.7 18 140x130 140x130 Isolation Voltage 4kV 140x130 4kV 620 24 140x130 4kV 350 620 Note: * VCE(sat) is measured across both arms of the bi-directional switch. 4kV 18 2.7 2.7 190x140 4kV 700 1250 2.7 6 4kV 4kV 2.7 4.9* 36 140x130 4kV 140x130 700 2.7 2.7 24 140x130 9 1000 2.7 2.7 18 Total Esw Rth(j-c) Baseplate @ (per switch) Dims (mm) Tc=125°C (°C/kW) (mJ) Single Single 4 kV 140x130 200 2.2 190 x 140 12 280 2.2 8 400 DIM1600FSM17-A DIM1200FSM17-A 2 IC (A) 12 18 36 9 140x130 140x130 140x130 190x140 4kV 4kV 4kV 4kV 785 18 140x130 4kV 350 36 140x130 4kV 350 350 24 36 36 140x130 140x73 140x73 4kV 4kV 4kV IGBT Modules 3300V IGBT Modules Part Number TS range (standard) DIM1500ESM33-TS Configuration Single IC (A) 1500 at TC (°C) 110 VCE (sat) @ Tc=25°C (V) 2.2 Total Esw Rth(j-c) Baseplate @ (per switch) Dims Tc=125°C (°C/kW) (mm) (mJ) 5750 DIM1500ASM33-TS Single 1500 110 2.2 5750 DIM1000XSM33-TS Single 1000 110 2.2 DIM1000ECM33-TS Chopper 1000 110 2.2 DIM500GCM33-TS Chopper 500 DIM1000NSM33-TS DIM500GDM33-TS DIM1000ACM33-TS DIM250PKM33-TS DIM250PLM33-TS Single Dual Chopper Chopper Chopper 1000 500 1000 250 250 110 110 110 110 110 110 2.2 2.2 2.2 2.2 2.2 2.2 8 190x140 190x140 10.2kV 3900 12 140x130 10.2kV 3900 12 190x140 1950 4150 1950 12 24 12 24 960 48 960 48 960 48 140x130 140x130 6kV 140x73 6kV 140x73 2.2 DIM1500ESM33-TL Single 1500 115 2.0 7150 8 190x140 DIM1000NSM33-TL Single 1000 115 2.0 4750 12 140x130 2.0 2400 24 2.0 4750 12 DIM1000XSM33-TL DIM500GDM33-TL DIM1000ECM33-TL Single Dual 1000 Chopper 500 Chopper DIM250PKM33-TL Chopper DIM250PLM33-TL DIM250PHM33-TL 500 Chopper DIM1000ACM33-TL DIM500GCM33-TL 1000 Chopper Half bridge 115 115 115 115 1000 115 250 115 250 250 115 115 115 2.0 2.0 2.0 2.0 7150 4750 4750 2400 8 12 12 24 2.0 1200 48 2.0 1200 48 2.0 1200 48 6kV 140x73 140x130 110 1500 6kV 10.2kV 250 Single 6kV 190x140 Half bridge DIM1500ASM33-TL 6kV 8 3900 DIM250PHM33-TS TL range (low loss) Isolation Voltage 6kV 6kV 6kV 190x140 10.2kV 140x130 10.2kV 140x130 190x140 6kV 6kV 6kV 190x140 10.2kV 140x73 6kV 140x73 6kV 140x130 140x73 6kV 6kV For further information and Data sheets www.dynexsemi.com 3 IGBT Modules 3300V IGBT Modules Part Number DSPT range DIM1200ESM33-F Configuration Single 1200 Single 800 DIM800NSM33-F Single DIM400NSM33-F Single DIM800XSM33-F DIM400GDM33-F DIM800ECM33-F DIM400GCM33-F DIM400XCM33-F IC (A) Dual Chopper Chopper Chopper at TC (°C) 2.8 4440 90 2.8 2950 90 400 90 800 400 400 90 90 90 90 DIM200PLM33-F Chopper 200 90 DIM200PHM33-F Half bridge 200 90 DIM200PKM33-F DIM100PHM33-F Chopper Half bridge 200 100 Total Esw Rth(j-c) Baseplate @ (per switch) Dims Tc=125°C (°C/kW) (mm) (mJ) 90 800 400 VCE (sat) @ Tc=25°C (V) 90 90 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 190x140 6kV 12 140x130 10.2kV 140x130 6kV 12 1470 24 2950 1470 1470 655 655 655 335 Notes: 1. IGBT module outlines and circuit configurations are shown on pages 13-15. 4 8 2950 1470 For further information and Data sheets www.dynexsemi.com Isolation Voltage 24 12 24 24 48 48 48 96 140x130 140x130 190x140 140x130 6kV 6kV 6kV 6kV 140x130 10.2kV 140x73 6kV 140x73 140x73 140x73 6kV 6kV 6kV IGBT Modules 4500V IGBT Modules Part Number range Configuration IC (A) at TC (°C) VCE (sat) @ Tc=25°C (V) Total Esw Rth(j-c) Baseplate @ (per switch) Dims Tc=125°C (°C/kW) (mm) (mJ) DIM1200ASM45-TS Single 1200 90 2.7 10500 8 190x140 DIM800XSM45-TS Single 800 90 2.7 7000 12 140x130 DIM400XCM45-TS Chopper 400 90 2.7 3500 24 140x130 DIM1200ASM45-TS001 DIM800XSM45-TS001 DIM400XCM45-TS001 Single Single Chopper 1200 800 400 90 90 90 2.7 2.7 2.7 10500 7000 3500 8 12 24 Isolation Voltage 7.4kV 190x140 10.2kV 140x130 10.2kV 140x130 10.2kV 7.4kV 7.4kV 6500V IGBT Modules Part Number range Configuration DIM750ASM65-TS Single DIM500ACM65-TS Chopper DIM500XSM65-TS DIM250XCM65-TS IC (A) at TC (°C) VCE (sat) @ Tc=25°C (V) Total Esw Rth(j-c) Baseplate @ (per switch) Dims Tc=125°C (°C/kW) (mm) (mJ) 750 90 3.0 10300 500 90 3.0 7000 Single 500 Chopper 250 90 90 3.0 3.0 7000 3500 Isolation Voltage 8 190 x 140 10.2 kV 12 190 x 140 10.2 kV 12 24 140 x 130 140 x 130 10.2 kV 10.2 kV For further information and Data sheets www.dynexsemi.com 5 FRD Modules for use with IGBT modules 1200V FRD Modules Part Number AlSiC baseplate Configuration IF (A) at TC (°C) IF(A) as single diode with external connection Vf@Tvj I2t =25°C (kA2s) (V) Qrr@Tvj Erec@Tvj Rth(j-c) Baseplate Isolation (per arm) (°C/kW) Dims (mm) Voltage DFM1200EXM12-A Triple 1200 75 3600 1.9 200 300 140 20 190x140 4kV DFM900FXM12-A Dual 900 75 1800 1.9 150 225 105 27 140x130 4kV DFM1200FXM12-A DFM600FXM12-A Copper Dual Dual 1200 600 baseplate 75 75 DFM1200EXS12-A Triple diode 1200 75 DFM900FXS12-A 75 DFM1200FXS12-A Dual 1200 DFM600FXS12-A Dual 600 Dual 900 2400 1200 3600 1.9 1.9 100 1.9 200 1.9 150 75 2400 1.9 75 1200 1.9 1800 200 300 150 300 140 70 140 20 40 20 140x130 140x130 4 kV 140x130 4kV 300 140 20 140x130 100 150 70 40 140x130 105 27 4kV 190x140 200 225 4kV 4kV 4kV 1800V FRD Modules Part Number AlSiC baseplate IF (A) at TC (°C) IF(A) Vf@Tvj as single =25°C diode with external connection I2t Qrr@Tvj Erec@Tvj (kA2s) Rth(j-c) (per arm) (°C/kW) Baseplate Isolation Dims (mm) Voltage DFM1200EXM18-A Triple 1200 75 3600 2.0 480 540 360 20 190x140 4kV DFM900FXM18-A Dual 900 75 1800 2.0 270 410 270 27 140x130 4kV DFM1200FXM18-A DFM600FXM18-A 6 Configuration Dual Dual 1200 600 75 75 2400 1200 2.0 2.0 480 120 540 160 For further information and Data sheets www.dynexsemi.com 360 120 20 40 140x130 140x130 4kV 4kV FRD Modules for use with IGBT modules 3300V FRD Modules Part Number TS range Configuration DFM1000EXM33-TS Triple DFM500NXM33-TS Dual DFM1000NXM33-TS DFM250PXM33-TS IF (A) 1000 at TC (°C) Vf@Tvj as single =25°C diode with external connection I2t Qrr@Tvj Erec@Tvj (kA2s) Rth(j-c) Baseplate (per arm) (°C/kW) Dims (mm) Isolation Voltage 90 3000 2.4 320 1070 1300 24 190x140 6kV 90 1000 2.4 80 540 650 48 140x130 6kV Dual 1000 90 Series 250 90 500 IF(A) 2000 N/A 2.4 2.4 320 20 1070 270 1300 330 24 140x130 96 140x73 6kV 6kV 4500V FRD Modules Part Number TS range DFM1200AXM45-TS Configuration Triple IF (A) 1200 at TC (°C) 65 IF(A) Vf@Tvj as single =25°C diode with external connection 3600 460 2.8 460 Triple 1200 65 3600 2.8 DFM1200XXM45-TS001 Dual 1200 65 2400 2.8 DFM800XXM45-TS Dual Dual 1200 800 65 65 DFM800XXM45-TS001 Dual 800 65 DFM400XXM45-TS001 Dual 400 65 Configuration IF DFM400XXM45-TS Part Number TS range Dual DFM750AXM65-TS Triple DFM250XXM65-TS Dual DFM500XXM65-TS Dual 400 (A) 750 500 250 65 at TC (°C) 2400 1600 1600 800 800 IF(A) (kA2s) 2.8 DFM1200AXM45-TS001 DFM1200XXM45-TS I2t 140x130 7.4kV 16 150 as single =25°C diode with external connection 24 4000 300 150 1450 750 750 2700 2700 1350 1350 24 48 48 190x140 10.2kV 140x130 10.2kV 140x130 10.2kV 140x130 7.4kV 140x130 10.2kV 6500V FRD Modules I2t Qrr@Tvj Erec@Tvj (kA2s) Voltage 140x130 7.4kV 2200 1450 Isolation 16 460 4000 Dims (mm) 190x140 7.4kV 16 2200 Baseplate 16 4000 2.8 Vf@Tvj 4000 Rth(j-c) (per arm) (°C/kW) 2200 300 2.8 2200 Erec@Tvj 460 2.8 2.8 Qrr@Tvj Rth(j-c) (per arm) (°C/kW) Baseplate Dims (mm) Isolation Voltage 70 2250 3.8 218 1500 3000 20 190x140 10.2 kV 70 500 3.8 24 500 1000 60 140x130 10.2 kV 70 1000 3.8 97 1000 2000 30 140x130 10.2 kV For further information and Data sheets www.dynexsemi.com 7 Phase Control SCRs Part Number VDRM / VRRM (V) IT (AV) at TC=60°C (A) DCR470T14 DCR780E14 DCR950D14 DCR1010G14 DCR1910F14 DCR2150X14 DCR2980C14 DCR3710V14 1400 1400 1400 1400 1400 1400 1400 1400 470 780 950 1010 1910 2150 2980 3710 6.3 9.1 12.8 15 26 29 47 60 DCR370T18 DCR720E18 DCR860D18 DCR960G18 DCR1710F18 DCR1800F18 DCR1970X18 DCR2830C18 DCR3400V18 1800 1800 1800 1800 1800 1800 1800 1800 1800 370 720 860 960 1710 1800 1970 2830 3400 DCR4440W22 DCR5900A22 DCR6430M22 DCR590E24 DCR750D24 DCR1700X24 DCR2360C24 DCR3060V24 2200 2200 2200 2400 2400 2400 2400 2400 DCR850G26 DCR1560F26 DCR7610H28 DCR2060C28 DCR2760V28 DCR4590B28 DCR4910W28 DCR5320A28 DCR5790M28 DCR780G30 DCR1460F30 DCR470E34 DCR610D34 DCR650G34 DCR1120F34 DCR1430X34 DCR1970C34 DCR2440V34 DCR3640W34 DCR4720A34 DCR5110M34 Up to 1400V Up to 1800V Up to 2400V Up to 3000V Up to 3400V 8 ITSM at Tvj VR=0 (kA) VTO at Tvj (V) Rt at Tvj (mΩ) dV/dt (V/ms) Non rep.dI/dt (A/ms) Rth(j-c) (°C/W) Outline Type Code Flange OD/ Contact OD/ Height (mm) 0.85 0.95 0.87 0.85 0.86 0.84 0.87 0.83 0.6400 0.5300 0.3820 0.3300 0.1600 0.1300 0.0980 0.0920 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 0.08 0.041 0.035 0.035 0.02 0.018 0.0125 0.01 T E D G F X C V 42/19/13.5 42/25/14.5 47/29/14.5 58/35/26.5 75/47/26.5 85/53/26.5 100/63/26.5 110/73/26.5 5 8.3 11.5 14 25 32 28 45 60 0.93 1.09 0.90 0.91 0.88 0.84 0.88 0.91 0.90 1.1500 0.5870 0.5000 0.3600 0.2000 0.1800 0.1600 0.1200 0.1100 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 0.08 0.041 0.035 0.035 0.02 0.02 0.018 0.0125 0.01 T E D G F F X C V 42/19/13.5 42/25/14.5 47/29/14.5 58/35/26.5 75/47/26.5 75/47/26.5 85/53/26.5 100/63/26.5 110/73/26.5 4440 5900 6430 590 750 1700 2360 3060 64.5 80 80 7.8 10 23 35 45 0.86 0.87 0.87 0.94 0.92 0.96 0.96 0.90 0.0950 0.0610 0.0610 1.0360 0.7200 0.2300 0.1790 0.1370 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 0.007 0.0057 0.005 0.041 0.035 0.018 0.0125 0.01 W A M E D X C V 120/84/26.5 150/100/35 150/100/26.5 42/25/14.5 47/29/14.5 85/53/26.5 100/63/26.5 110/73/26.5 2600 2600 2800 2800 2800 2800 2800 2800 2800 3000 3000 850 1560 7610 2060 2760 4590 4910 5320 5790 780 1460 11 24 105 30 43 65 65 75 75 10.5 23 0.95 0.89 1.02 0.98 0.88 0.90 0.90 0.90 0.90 1.00 0.95 0.5000 0.2700 0.2500 0.1700 0.0520 0.0957 0.0957 0.080 0.080 0.6000 0.3000 1000 1000 1000 1000 1000 2000 2000 1000 1000 1000 1000 1000 1000 1000 1000 1000 500 500 1000 1000 1000 1000 0.035 0.02 0.004 0.0125 0.01 0.007 0.00631 0.0057 0.005 0.035 0.02 G F H C V B W A M G F 58/35/26.5 75/47/26.5 172/110/35 100/63/26.5 110/73/26.5 120/84.6/34.87 120/84/26.5 150/100/35 150/100/26.5 58/35/26.5 75/47/26.5 3400 3400 3400 3400 3400 3400 3400 3400 3400 3400 470 610 650 1120 1430 1970 2440 3640 4720 5110 6.3 8 8.4 17 19.2 30 33 54 69 69 1.04 0.98 1.03 1.08 1.06 1.05 1.00 0.95 0.86 0.86 1.7250 1.2000 0.3700 0.5600 0.3500 0.2980 0.2350 0.1530 0.1150 0.1150 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 0.041 0.035 0.035 0.02 0.018 0.0125 0.01 0.007 0.057 0.005 E D G F X C V W A M 42/25/14.5 47/29/14.5 58/35/26.5 75/47/26.5 85/53/26.5 100/63/26.5 110/73/26.5 120/84/26.5 150/100/35 150/100/26.5 Phase Control SCRs Part Number VDRM/ VRRM (V) IT (AV) at TC=60°C (A) ITSM at Tvj VR=0 (kA) VTO at Tvj (V) Rt at Tvj (mΩ) dV/dt (V/ms) Non rep.dI/dt (A/ms) Rth(j-c) (°C/W) DCR780G42 DCR1150N42 DCR1260F42 DCR2040L42 DCR2150C42 DCR2930Y42 DCR3030V42 DCR3790B42 DCR4100W42 DCR4500A42 DCR4880M42 DCR5840H42 4200 4200 4200 4200 4200 4200 4200 4200 4200 4200 4200 4200 780 1150 1255 2040 2150 2930 3030 3790 3880 4500 4880 5840 10.5 16.8 16.8 29 29 40.6 40.6 53.5 53.5 60.8 60.8 83.5 1.05 1.00 1.00 1.08 1.08 0.98 0.98 1.00 1.00 0.92 1.92 0.98 0.8443 0.4440 0.4440 0.2650 0.2650 0.1980 0.1980 0.1263 0.1263 0.1220 0.1220 0.1000 1500 1500 1500 1500 1500 1500 1500 1500 1500 2000 2000 1000 400 1000 1000 400 400 400 400 400 400 200 400 1000 0.0268 0.0221 0.0184 0.0117 0.0101 0.00835 0.00746 0.007 0.00631 0.00603 0.00518 0.004 G N F L C Y V B W A M H 58.5/34/26.72 73/47/34.89 73/47/26.72 98.9/62.85/34.82 98.9/62.9/26.76 112.5/73/35.35 110/73/27.57 120/84.6/34.87 120/84.6/27.57 148/100/35.47 148/100/26.12 172/110/36 DCR690G52 DCR1020N52 DCR1110F52 DCR1850L52 DCR1950C52 DCR2630Y52 DCR2720V52 DCR3480B52 DCR3640W52 DCR3990A52 DCR4330M52 DCR4540H52 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 690 1018 1107 1845 1950 2630 2720 3480 3550 3990 4325 4540 9.45 14.8 14.8 26.25 26.25 36.7 36.7 49 49 53.4 53.4 80 1.08 1.08 1.08 1.10 1.10 1.10 1.10 0.98 0.98 0.99 0.99 1.08 1.1250 0.6100 0.6100 0.3460 0.3460 0.2414 0.2414 0.1886 0.1886 0.1578 0.1578 0.1270 1500 1500 1500 1500 1500 1500 1500 1500 1500 2000 2000 2000 300 800 800 300 300 300 300 400 400 400 400 1000 0.0268 0.0221 0.0184 0.0117 0.0101 0.00835 0.00746 0.007 0.00631 0.00603 0.00518 0.004 G N F L C Y V B W A M H 58.5/34/26.84 73/47/34.89 73/47/26.84 98.9/62.85/34.94 98.9/62.9/26.84 112.5/73/35.47 110/73/27.69 120/84.6/34.99 120/84.6/27.69 148/100/35.61 148/100/26.26 172/110/36 DCR490J65 DCR590G65 DCR820N65 DCR890F65 DCR1570L65 DCR1650C65 DCR2220Y65 DCR2290V65 DCR2880B65 DCR2950W65 DCR3220A65 DCR4420H65 DCR4660H65 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 490 595 820 894 1568 1650 2220 2290 2845 2945 3220 4420 4660 6.6 6.6 12 12 22 22 30 30 38.5 38.5 44.2 65.6 69.3 1.11 1.11 1.18 1.18 1.20 1.20 1.24 1.24 1.13 1.13 1.08 1.3233 1.08 1.6470 1.6470 0.9472 0.9472 0.5000 0.5000 0.3518 0.3518 0.2640 0.2640 0.2643 0.1733 0.1675 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 2000 2000 2000 200 200 500 200 300 300 300 500 300 300 200 200 200 0.0379 0.0268 0.0221 0.0184 0.0117 0.0101 0.00835 0.0074 0.007 0.00631 0.00603 0.00423 0.00423 J G N F L C Y V B W A H H 57/33.95/35.15 58.5/34/27.1 73/47/35.15 73/47/27.1 98.9/62.85/35.2 98.9/62.9/27.1 112.5/73/35.73 110/73/27.95 120/84.6/35.25 120/84.6/27.95 148/100/35.85 170/115/35 170/115/35 DCR390J85 DCR470G85 DCR680N85 DCR750F85 DCR1300L85 DCR1840Y85 DCR1910V85 DCR2400B85 DCR2450W85 DCR2560A85 DCR2760M85 DCR3640H85 DCR3980H85 8500 8500 8500 8500 8500 8500 8500 8500 8500 8500 8500 8500 8500 387 467 677 733 1300 1840 1910 2370 2450 2560 2765 3640 3980 5.25 5.25 9.8 9.8 17.6 25 25 32.5 32.5 32.5 32.5 54 59.6 1.13 1.31 1.31 1.30 1.30 1.35 1.30 1.30 1.23 1.23 1.18 1.4067 1.2933 2.7630 2.7630 1.5420 1.5420 0.7670 0.5500 0.5500 0.3980 0.3980 0.4600 0.4600 0.2767 0.2333 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 2000 2000 200 200 200 200 400 300 300 300 300 200 200 500 500 0.0379 0.0268 0.0221 0.0184 0.0117 0.00835 0.00746 0.007 0.00631 0.00603 0.00518 0.00425 0.00425 J G N F L Y V B W A M H H 57/33.95/35.51 58.5/34/27.46 73/47/35.51 73/47/27.46 98.9/62.85/35.56 112.5/73/36.09 110/73/28.31 120/84.6/35.61 120/84.6/28.31 148/100/36.19 148/100/26.0 170/115/35 170/115/35 Up to 4200V Up to 5200V Up to 6500V Up to 8500V Outline Flange OD/ Type Contact OD/ Code Height (mm) 9 Pulse Power Thyristors Part Number Max Voltage (Main Selection) VDRM (V) Pulsed Power Thyristors (SCR) ACR300SG33 PT40QPx45 PT60QHx45 PT85QWx45 3300 4500 4500 4500 3300 4500 4500 4500 VRRM (V) IT (AV) at TC=80°C (A) dl/dt (kA/ms) to lpk (kA) dV/dt (V/ms) Rth(j-c) Outline (°C/W) Type Code 20 16 16 16 493 760 1000 1670 2 5 10 22 0.125 20 40 90 3000 200 175 200 0.042 0.033 0.013 0.01 Note: 1. Please contact Customer Services for the availability of clamps for these devices. The PT family of Pulse Power Thyristors (PPTs) is based on Dynex’s GTO technology and is designed for long term stability under D.C. voltages. The structures are resistant to cosmic ray induced failures at normal working voltages. Dynex’s Pulse Power Thyristors may be used to connect a source of stored energy, such as a capacitor, to a load, or to bypass and protect the load in the case of a crowbar circuit. In these pulsed power applications where the rate of rise of current is very fast, the pulse power switch is acting as a closing switch and ordinary phase control thyristors (SCRs) are likely to fail due to the high di/dt experienced. Pulse Power Thyristors may also be required to act in the opening switch mode. Such applications may include those where voltage is reapplied to the pulse power switch shortly after closing and the switch needs to have recovered blocking capability or the transferred energy needs to be controlled. In these applications, the switch needs to have turn-off capability to reduce the natural turn-off time (tq) of the device. The device is operated in GTO mode with the appropriate commutating gate drive. Dynex has been supplying thyristors used as crowbars to protect other high power circuitry in railway propulsion units and the like for many years. In addition, Dynex has been a supplier of devices used in equipment for the sterilization of foods by intense light or x-rays since the late 1980s. These applications operate at moderate di/dts and can be satisfied with conventional thyristor solutions. 10 G P H W Flange OD Contact OD Height (mm) 58.5/34/27 56/38/37 100/63/26.5 120/84.6/27.7 Thyratron replacement pulsed power assembly In the field of ignitron replacements and weld switches, Dynex has been a world leader in the application of solid state devices. Dynex has been involved in the design and manufacture of assemblies for the pulse power communities on the West Coast of America and at CERN, Switzerland. An example of a pulse power assembly is shown above. It uses five Dynex PT40QPx45 4.5kV SCR devices and was designed in-house by our power electronics design team. It features optical triggering and feedback plus breakover diode protection of individual thyristors. For more information on how Dynex can help with your pulse power needs, please e-mail us at [email protected] For further information and Data sheets www.dynexsemi.com Rectifier Diodes Part Number VRRM (V) IF (AV) at TC=100°C (A) IFSM at Tvj VR=0 I2t at Tvj VR=0 (MA2s) Rth(j-c) (°C/W) IFM (A) DRD520T14 DRD1360D14 DRD1510G14 DRD2770F14 DRD3220X14 DRD4650C14 DRD6080V14 1400 1400 1400 1400 1400 1400 1400 520 1360 1510 2770 3220 4650 6080 5.9 15.2 16.8 31 35.8 45 60 0.17 1.16 1.41 4.81 6.41 10.13 18.00 0.08 0.035 0.035 0.02 0.018 0.0125 0.01 800 1500 1500 1500 3000 3000 3000 1.45 1.3 1.2 1.05 1.15 1.05 1.05 0.80 0.78 0.78 0.78 0.77 0.76 0.76 DRD410T22 DRD990D22 DRD1100G22 DRD2030F22 DRD2360X22 DRD3430C22 DRD4460V22 DRD6380W22 DRD6800A22 DRD8880H22 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 410 990 1100 2030 2360 3430 4460 6380 6800 8880 4.9 12.5 13.9 25.7 29.8 42.2 56.4 78 94 125 0.12 0.78 0.97 3.30 4.44 8.90 15.90 30.42 44.18 78.13 0.08 0.035 0.035 0.02 0.018 0.0125 0.01 0.007 0.0057 0.004 800 1500 1500 1500 3000 3000 3000 6000 6000 6000 1.85 1.60 1.45 1.20 1.35 1.20 1.15 1.09 1.03 0.98 DRD850D34 DRD960G34 DRD1830F34 DRD2050X34 DRD2980C34 DRD3920V34 DRD5240W34 DRD6140A34 DRD7810H34 3400 3400 3400 3400 3400 3400 3400 3400 3400 850 960 1830 2050 2980 3920 5240 6140 7810 10.8 12 23 25.8 36.5 49.5 64.2 84.4 118 0.58 0.72 2.65 3.33 6.66 12.25 20.61 35.62 69.62 0.035 0.035 0.02 0.018 0.0125 0.01 0.007 0.0057 0.004 1500 1500 1500 3000 3000 3000 6000 6000 6000 DRD870G40 DRD1230F40 DRD2960Y40 DRD3390V40 DRD4350A40 4000 4000 4000 4000 4000 870 1225 2960 3388 4350 15 25 62.5 62.5 83 1.13 3.13 19.53 19.53 34.50 0.032 0.022 0.0095 0.0075 0.007 DRA170E44 DRD2000L45 DRD6290H45 4400 4500 4500 170 2000 6290 1.5 31 99.4 0.01 3.92 49.4 DRD1100F48 DRD710G50 DRD2690Y50 DRD3080V50 DRD3770A52 DRD5940H55 4800 5000 5000 5000 5200 5500 1105 710 2691 3083 3768 5940 20.5 11.5 55 55 70 93.6 DRD630G60 DRD1010F60 DRD5150H65 6000 6000 6500 630 1015 5150 DRD4950H72 DRD4690H85 DRD560G90 7200 8500 9000 4950 4690 557 Up to 1400V Up to 2200V Up to 3400V Up to 4000V Up to 4500V Up to 5500V Up to 6500V Up to 9000V VFM@ VTO at IFM & Tvj (V) Tc= 25°C(V) rt at Tvj (mΩ) Outline Type Code Flange OD/ Contact OD/ Height (mm) 0.6570 0.2570 0.1880 0.0920 0.0730 0.0510 0.0350 T D G F X C V 42/19/13.5 47/29/14.5 58/34/26.5 75/47/26.5 85/53/26.5 100/63/26.5 110/73/26.5 0.82 0.82 0.82 0.82 0.81 0.79 0.81 0.82 0.82 0.77 1.1100 0.4330 0.3180 0.1560 0.1250 0.0860 0.0590 0.0450 0.0350 0.0350 T D G F X C V W A H 42/19/13.5 47/29/14.5 58/34/26.5 75/47/26.5 85/53/26.5 100/63/26.5 110/73/26.5 120/84/26.5 150/100/35 172/110/35 1.95 1.7 1.35 1.55 1.35 1.25 1.29 1.1 1.1 0.88 0.88 0.88 0.86 0.82 0.85 0.80 0.80 0.80 0.6130 0.4500 0.2000 0.1800 0.1280 0.0840 0.0820 0.0500 0.0500 D G F X C V W A H 47/29/14.5 58/34/26.5 75/47/26.5 85/53/26.5 100/63/26.5 110/73/26.5 120/84/26.5 150/100/35 172/110/35 1800 3400 3000 3000 3000 1.6 1.6 1.25 1.25 1.06 0.75 0.82 0.75 0.75 0.78 0.4400 0.2900 0.1180 0.1180 0.0763 G F Y V A 58.5/34/27 73/47/27 112.5/73/37.3 110/73/26.5 151/10037.5 0.115 0.013 0.004 300 3000 6000 2.1 1.4 1.19 1.12 0.84 0.80 3.7500 0.1900 0.0650 E L H 42/25/15 102/63/32.9 172/110/36 2.13 0.66 15.12 15.12 24.50 43.8 0.022 0.032 0.0095 0.0075 0.0065 0.004 3400 1800 3000 3000 3000 6000 1.8 1.8 1.21 1.21 1.17 1.26 0.84 0.88 0.82 0.82 0.82 0.80 0.3830 0.6870 0.1430 0.1430 0.1110 0.0760 F G Y V A H 73/47/27 58.5/34/27 112.5/73/37.3 110/73/26.5 148/100/35.0 172/110/36 10.5 16.5 82.5 0.555 1.425 34 0.032 0.022 0.004 1800 3400 6000 2.1 2.1 1.65 0.90 1.00 1.15 0.9300 0.4200 0.0830 G F H 58.5/34/27 73/47/27 172/110/36 79 74.5 10 31.2 27.75 0.5 0.004 0.004 0.032 6000 6000 1200 1.71 1.31 2.08 1.15 1.15 1.00 0.0940 0.1100 1.5750 H H G 172/110/36 172/110/36 58/34/26.5 11 Fast Recovery Diodes Part Number Up to 1600V VRRM (V) IT (AV) at TC=65°C (A) IFSM at Tvj VR=0 (kA) I2t at Tvj VR=0 (MA2s) VF (V) Qr (mC) trr (ms) Outline Type Code Flange OD/ Contact OD/ Height (mm) DF451 1600 295 3.5 0.061 600 2.65 25 1.22 T 42/19/15 DSF8025SE DF051 2500 2500 650 1490 7.5 14 0.281 0.980 1000 1500 2.3 1.85 540 800 5 5 E F 42/25/15 75/47/29 DSF8045SK DSF20545SF DSF21545SV 4500 4500 4500 430 1250 3200 3.5 16 20 0.06125 1.28 2 1000 1800 3000 4 2.1 2 440 3.07 1250 7 1800 7 K F V 42/25/29 75/47/29 112.5/73/27 DSF11060SG 6000 400 3.8 700 G 58/35/29 Up to 2500V Up to 4500V Up to 6000V 4.2 0.088 Gate Turn Off Thyristors Part Number Asymmetric Types Up to 1300V VDRM (V) VRRM (V) IT (AV) at TC=80°C (A) ITCM 600 dV/dt dI/dt (V/ms) (A/ms) 6 Rth(j-c) Outline Flange OD/ (°C/W) Type Contact OD/ Code Height (mm) Snubber Diode Anti-parallel and Freewheel Diode DGT304SE 1300 16 250 700 500 500 0.075 E 41.9/25/15 - DF451 DGT305SE 1800 16 240 700 500 500 0.075 E 41.9/25/15 - DF451 DG306AE DG406BP DG646BH 2500 2500 2500 16 16 16 225 500 867 600 1000 300 1200 1000 300 2500 1000 300 0.075 0.041 0.018 E 41.9/25/15 DFS454 P 56/38/27 DSF8025SE DSF8025SE H 100/63/26.5 DSF8025SE DF051 DG408BP DG648BH DG758BX DG808BC DG858BW DG858DW 4500 4500 4500 4500 4500 4500 16 16 16 16 16 16 320 745 870 780 1180 1100 1000 2000 3000 3000 4000 3000 1000 1000 1000 1000 1000 750 300 300 300 400 300 300 0.041 0.018 0.0146 0.014 0.011 0.011 DGT304RE 1300 1300 250 700 500 500 0.075 E 41.9/25/15 - DF451 DG305RE 1800 1800 240 700 500 500 0.075 E - DF451 DGT409BCA 6500 6500 140 1500 1000 300 0.046 CA Up to 1800V Up to 2500V Up to 4500V Reverse Blocking Up to 1300V Up to 1800V Up to 6500V 12 IFM (A) For further information and Data sheets www.dynexsemi.com P H X C W W 56/38/27 DSF8045SK DSF8045SK 100/63/26.5 DSF8045SK DSF20545SF 112/66/27 DSF8045SK DSF21545SV 108/77.2/27DSF8045SK DSF21545SV 120/84.6/27.7DSF8045SK DSF21545SV 120/84.6/27.7DSF8045SK DSF21545SV 41.9/25/15 56/38/36 DSF11060SG DSF11060SG Package Outlines IGBT Modules Module Outlines and Circuit Configurations All dimensions shown in mm unless stated otherwise. Chopper High Side - PKM PKM Chopper Low Side - PLM PLM Package type: P Note: 1. Mounting recommendations are given in the application note AN4505 ‘Heatsink Issues For IGBT Modules’ available from our website For further information and Data sheets www.dynexsemi.com 13 Package Outlines IGBT Modules Module Outlines and Circuit Configurations All dimensions shown in mm unless stated otherwise. Note: 1. Mounting recommendations are given in the application note AN4505 ‘Heatsink Issues For IGBT Modules’ available from our website. 14 For further information and Data sheets www.dynexsemi.com Package Outlines Module Outlines and Circuit Configurations All dimensions shown in mm unless stated otherwise. FRD Modules Notes: 1. Mounting recommendations are given in the application note AN4505 ‘Heatsink Issues For IGBT Modules’ available from our website For further information and Data sheets www.dynexsemi.com 15 Thyristor & Diode Outlines For detailed dimensions, see Datasheet Outline Flange (A) [mm] Max * Pole (B) [mm] Nominal * Depth (D) [mm] Maximum Weight (kg) A 148 & 150 100 37 2.6 C 99 & 102 63 28 E 42 25 15 57 & 58 35 B D F G H 120 47 73 & 75 172 J 57 & 58 L 99 & 100 & 102 N 73 & 75 K M T 42 148 & 150 42 85 29 47 110 36 15 28 28 36 0.25 3.5 63 36 1.05 47 36 0.48 25 100 19 27 27 29 1.55 36 1.45 85 53 27 73 & 78 1.95 0.055 X 84 0.16 15 29 112 & 120 0.433 0.322 73 Y 0.24 0.082 36 110 & 112 120 0.8 34 V W 1.5 1.1 0.6 Notes: *The character “&” denotes we manufacture products in a generic outline, some of which have one flange/contact diameter and others that have a slightly different flange/contact diameter. There is no choice of flange/contact diameter for a specific device. 16 For further information and Data sheets www.dynexsemi.com GTO Outlines For detailed dimensions, see Datasheet Outline Flange/Max OD (A) [mm] Pole (B) [mm] Depth (D) [mm] Weight (kg) C 108 77 27 1.4 CA 56 38 36 56 38 27 E 42 H 100 W 120 P X 85 25 63 85 53 15 0.082 27 0.82 27 27 0.46 0.35 1.7 1.2 For further information and Data sheets www.dynexsemi.com 17 Power Assemblies Power Assembly Products In addition to the discrete product lines, Dynex offers a design, build and refurbishment service for power assemblies through our Power Electronic Assemblies group. This group provides support for customers requiring more than the basic semiconductor and utilises the skills of our power electronics, mechanical and electronic engineers. The team has direct access to the company’s application, test and product design personnel to produce the optimum solution for your requirements. Typical applications for Dynex power assemblies include: • High power rectification • Pulse power switches • Inverters • Soft starts • Battery chargers • Magnet supplies • Resistance welding switches • Variable speed drives • GTO gate drive units • Static compensation stacks Dynex also has a range of air and liquid cooled heatsink and clamping systems. Standard Assemblies Many factors need to be taken into consideration to maximise semiconductor performance in an assembly. Typically these are; type of heatsink, transient conditions, overloads, ambient temperature, surface finish (e.g. black anodised) and the method of cooling on which the application relies (air, liquid or phase change). With a wealth of experience behind them and using 3D CAD and simulation software, our designers have a vast range of bipolar and IGBT power semiconductor devices and components available which will ensure that even standard power assemblies are optimised for customer applications. Rectifiers Standard diode and thyristor rectifier combinations. • 3-phase and dual 3- phase diode rectifier assemblies. • 3-phase (6 pulse) and dual 3-phase (12 pulse) controlled assemblies. Inverters/Converters • 3-phase thyristor inverter power units. • IGBT chopper H-bridge inverter modules. • IGBT full 3-phase inverters for motor control. • Frequency converters. Stack Assemblies • Stick stacks for high voltage, high current applications. • MV soft starts. • Crowbars. • Thyristor/GTO assemblies with anti- parallel diode combinations • Air cooled and water cooled stack assemblies. Pulsed Power Systems For many pulsed power applications, semiconductor switches can offer advantages over alternative switch technologies. These advantages include:• Increased number of operations and reliability. • Improved waveform shaping and pulse control. • Increased rep rate. • Higher current pulses. The choice of semiconductor device is critical for correct and reliable operation and Dynex have a wide range of thyristor types, including some which have been specifically developed for high di/dt pulsed power applications. In addition, Dynex have many years of experience in providing specific assemblies for custom Pulsed Power requirements. Typically used for:1. Connection of energy storage to low inductance loads 2. Crowbars for by-passing / protecting a load 3. General Thyratron and ignitron replacements Contract Assembly Refurbishment and Customised Projects The manufacturing facility has a proven capability for building and testing high power semiconductor assemblies. This capability is offered to third party customers looking for a ready built power assembly operation to provide part or complete solutions for this type of manufacturing. This service extends to refurbishment of these assemblies, where the units can be renovated with the latest technology components giving them extended operating life and renewed long term reliability 18 Power Assemblies SVC Valve stacks Thyristor Controlled Reactors (TCRs) are used, usually in combination with Fixed or Mechanically Switched Capacitors (FC or MSC) to provide Static VAR Compensation. This helps improve the quality of the mains voltage supply by compensating for large loads with poor power factors. Typical example applications include flicker reductions and power factor compensation of Electric Arc Furnaces in steel mills. Dynex provide a range of water cooled TCR valves from 12MVAr up to 100MVAr. These can be used in both single phase and three phase applications. The Dynex range of TCRs has been designed with optimum performance and availability in mind. All the thyristor modules used in the TCR valves are matched to improve static and dynamic sharing whilst N+1 redundancy is included as standard to ensure consistent availability of supply, even in the harshest of operating conditions. Heatsinks Clamps and Accessories Device Clamps A line of pre-loaded clamps is offered, up to 180kN for our 150mm disc devices. Bar clamps are suitable for single and double side cooling, with high insulation versions available for high voltage assemblies. Heatsinks Dynex has its own proprietary range of extruded aluminium heatsinks designed to optimise the performance of our semiconductors. Additionally, Dynex has access to a vast range of aluminium extrusions from independent manufacturers giving our design team the best options available. Water cooled heatsinks (coolers) are available and are compatible with devices up to 100mm silicon diameter. These are designed for use in high current, high power assemblies such as single, three or six phase bridges or A.C. controllers. Complete bridges of up to six devices may be constructed and two coolers per device may be used for double side cooling. Accessories Dynex can also provide a wide range of accessories, such as gate firing boards, voltage dividers, optical combiner and splitter boards, GLPS (Ground Level Power Supply) and high voltage isolated stack firing systems for multi level stacks (typically 10 levels) High Power test equipment The Dynex Equipment Group have designed a wide range of testers which can capture all of the electrical and timing measurements required to define the performance of high power semiconductor devices. (Thyristors, Diodes, GTO’s and IGBT’s)Having provided this type of equipment for internal use for 30 years, Dynex have developed a capability to provide low cost customised test solutions for third party companies. This capability has been developed to enable test systems to be offered for a wide variety of applications which are not always for semiconductor testing. E.g. Fuse testing, lightning simulation, breaker testing, capacitor reliability, resistor thermal cycling, crowbar testing etc. Our Engineering team are able to review custom requirements for high voltage and high current testing and to design the hardware solution to meet these requirements Amongst our existing designs we have produced the following systems in the field:Passive thermal cycling equipment, Power cycling equipment, Dynamic IGBT Testers, High voltage hot blocking equipment,. Low voltage hot test equipment, Qrr and Tq Testing., Multiple cycle surge testing,Thyristor high power parametric test systems,High voltage leakage measurement systems. For further information and Data sheets www.dynexsemi.com 19 EOFF C dI/dt s IC(PK) Rth(c-hs) P G Symbols and Definitions CS dI/dt Snubber capacitance. Critical rate of rise of on-state/forward current. dIFG/dt Rate of rise of positive gate current. dIGQ/dt Rate of rise of reverse gate current (GTO). dIT/dt dsc dV/dt Critical rate of rise of on-state current (GTO). Double side cooled. Critical rate of rise of off-state voltage. dIVD/dt Rate of rise of off-state voltage (GTO). EOFF Erec Turn-off energy loss. Reverse recovery energy. Esw(TOT) Total switching energy. Fm/F I2t IC(PK) Peak collector current. IC IDRM IF IF(AV) IFM IF(RMS) IFSM IG(ON) IGT IRMS IPK IRRM IT(RMS) IT/ITM IT(AV) ITCM ITSM 20 Clamping force/mounting torque. I2t value. Collector current. On-state leakage current (thyristor). Forward current (diode). Mean forward current (diode). Peak forward current (diode). RMS forward current (diode). Single cycle surge current (diode), (10ms half sinewave). Gate turn-on current (GTO). Gate trigger current. RMS line current. Peak current. Peak reverse recovery current. RMS on-state current (thyristor). On-state current. Mean on-state current (thyristor). Maximum repetitive controllable current (GTO). Single cycle surge current (thyristor), (10ms half sinewave). PG Gate power dissipation. PGM Peak gate power dissipation. PG(AV) Qr Qrr rT Mean gate power dissipation. Recovered charge. Reverse recovery charge. On-state/forward slope resistance. Rth(c-hs) Thermal resistance – case to heatsink. Rth(j-c) Thermal resistance – junction to case. Rth(j-hs) Thermal resistance – junction to heatsink. Rth(j-w) Thermal resistance – junction to water. Tc Case temperature. tq Turn-off time. tgq trr THS Tvj Tvjm Twater Gate controlled turn-off time. Reverse recovery time. Heatsink temperature. Virtual junction temperature. Maximum virtual junction temperature. Water temperature. VCE(sat) Collector-emitter saturation voltage (IGBT). VCES Collector-emitter voltage (IGBT). VDSM Non-repetitive peak off-state voltage. VDRM VF VFM Visol VGT VR VRRM VRSM VT VTM VTO VT(TO) Repetitive peak off-state voltage. Forward voltage (diode). Peak forward voltage (diode). Isolation voltage. Gate trigger voltage. Reverse voltage. Repetitive peak reverse voltage. Non-repetitive peak reverse voltage. On-state voltage. Peak on-state voltage. Threshold voltage (diode). Threshold voltage (thyristor). For further information and Data sheets www.dynexsemi.com Notes Head Office - Customer Service Doddington Road, Lincoln, LN6 3LF UK Tel: +44 1522 502 753 / 502 901 Fax: +44 1522 500 020 France, Benelux, Italy & Switzerland Tel: +33 (0)3 44 72 84 31 Fax: +33 (0)3 44 72 77 61 The Americas Tel: +1 814 456 1208 Fax: +1 814 520 6992 China Tel: +86 731 28498268 / 28498124 Fax: +86 731 28498851 / 28498494 Rest of the World Tel: +44 1522 502 753 / 502 901 Fax: +44 1522 500 020 E-mail: [email protected] website: www.dynexsemi.com This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor be regarded as a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability performance or suitability of any product or service. The Company reserves the right to alter without prior knowledge the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user’s responsibility to determine fully the performance and suitability of any equipment using such information and to ensure that any publication or data used has not been superseded. These products are not suitable for use in any medical product whose failure to perform may result in death to the user. All products and materials are sold and services provided subject to the Company’s conditions of sale, which are available on request. All trademarks and registered trademarks are property of their respective owners. Supersedes issue April 2013, version DS5766-4. © Dynex Semiconductor 2014.