2.00mm PIN HEADERS .079" [2.00] CENTERLINE 2PH SERIES Introduction Adam Tech 2PH & D2PH Series 2.0mm Pin Headers offer a full range of fine pitched headers in a variety of configurations including Single, Dual and Three rows, Straight & Right Angle in Thru-Hole or SMT mounting. Their close tolerance .020" sq. posts are smoothly finished and taper tipped to eliminate insertion damage to the PCB or mating connector. Adam Tech 2.0mm Pin Headers can be easily cut into exact sizes as required. Options include stacked insulator versions and choice of tin, gold or selective gold plating. This series is compatible with all industry standard 2.0mm pitch mating connectors. Features: Single, Dual or Three Row Tin, gold or selective gold plating options Thru-hole or SMT mounting Stacked and Custom length versions available Versatile Breakaway design Hi Temp Insulator available ORDERING INFORMATION 2PH2 = 2.00mm Dual Row Straight Pin Header PLATING U = Gold plated T = Tin plated SG = Selective gold plating in contact area, tin plating on solder tails POSITIONS Single row: 1 thru 40 Dual row: 2 thru 80 2PH2R = 2.00mm Dual Row Right Angle Pin Header Material: Standard insulator: PBT, glass reinforced, rated UL94V-0 Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0 Insulator Color: Black Contacts: Brass Plating: U = Gold over nickel underplate overall SG = Gold over nickel underplate on contact area, tin over copper underplate on tails. T = Tin over copper underplate overall Electrical: Operating voltage: 250V AC max. Current rating: 1 Amp max. Contact resistance: 20 mΩ max. initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V AC for 1 minute ORDERING INFORMATION DUAL INSULATOR HEADERS D2PH 1 40 NO. OF ROWS 1 = Single row 2 = Dual row SERIES INDICATOR D2PH= 2mm Dual Insulator Pin Header SG .xxx"/.xxx"/.xxx “C" DIM. “D" DIM. “E" DIM. PLATING U = Gold plated T = Tin plated SG =Gold plating in contact area tin plating on solder tails STACKING DIMENSIONS Specified In Inches As: “C” Dim. / “D” Dim. / “E” Dim. Replace “D” Dim. with “SMT” for Surface Mount Option POSITIONS Single row: 2 thru 40 Dual row: 4 thru 80 Packaging: Anti-ESD plastic bags (Tape and Reel available for SMT option) Approvals and Certifications: UL Recognized & CSA Certified, File no. E224053 A PIN LENGTH A=Standard length B=Special length, customer specified defined as: tail dim/total length SERIES INDICATOR 2PH1 = 2.00mm Single Row Straight Pin Header Specifications: Temperature Rating: Operating temperature: -40°C to +105°C Soldering process temperature: 260°C U 2PH1R= 2.00mm Single Row Right Angle Pin Header Mating Receptacles: Mates with all industry standard .050" pitch female headers Mechanical: Mating durability: 1,000 cycles 40 2PH1 OPTIONS: Add designator(s) to end of part number SMT= Surface Mount leads Dual Row SMT-A= Surface Mount leads Type A SMT-B= Surface Mount Leads Type B HT=Hi-Temp insulator for Hi-Temp soldering processes up to 260°C (Add this option for thru-hole products only. All SMT products are manufactured with Hi-Temp insulators) L = Low profile 1.5mm insulator thickness P = Locating pegs BR= Board retention solder tails 298 www.adam-tech.com