Adam Tech 2PH1-40-UA datasheet: pdf

2.00mm PIN HeADeRS
.079" [2.00] CenterlIne
Adam Technologies, Inc.
2Ph SerIeS
INTRODUCTION
Adam Tech 2PH & D2PH Series 2.0mm Pin Headers offer a full
range of fine pitched headers in a variety of configurations including
Single, Dual and Three rows, Straight & Right Angle in Thru-Hole or
SMT mounting. Their close tolerance .020" sq. posts are smoothly
finished and taper tipped to eliminate insertion damage to the PCB or
mating connector. Adam Tech 2.0mm Pin Headers can be easily cut
into exact sizes as required. Options include stacked insulator
versions and choice of tin, gold or selective gold plating. This series
is compatible with all industry standard 2.0mm pitch mating
connectors.
ORDERING INFORMATION
MATING RECEPTACLES:
Mates with all industry standard .050" pitch female headers
D2PH
280
40
SERIES
INDICATOR
D2PH = 2mm Dual
Insulator
Pin Header
SG
.xxx"/.xxx"/.xxx
“C” DIM.
“D” DIM.
“E” DIM.
PLATING
U = Gold plated
T = Tin plated
SG = Gold plating
in contact area
tin plating on
solder tails
STACKING DIMENSIONS
Specified In Inches As:
“C” Dim. / “D” Dim. / “E” Dim.
Replace “D” Dim. with “SMT”
for Surface Mount Option
POSITIONS
Single row: 2 thru 40
Dual row: 4 thru 80
OPTIONS: Add designator(s) to end of part number
SMT = Surface Mount leads Dual Row
SMT-A = Surface Mount leads Type A
SMT-B = Surface Mount Leads Type B
HT = Hi-Temp insulator for Hi-Temp soldering processes up to
260°C
INSULATOR
AVA I L A B L E
Pb
RoHS
US
1
NO. OF ROWS
1 = Single row
2 = Dual row
HI-TEMP
E
PLATING
U = Gold plated
T = Tin plated
SG = Selective gold
plating in contact
area, tin plating
on solder tails
ORDERING INFORMATION
DUAL INSULATOR HEADERS
PACKAGING:
Anti-ESD plastic bags
(Tape and Reel available for SMT option)
C
A
PIN LENGTH
A = Standard
length
B = Special
length,
customer
specified
defined as:
tail dim/total
length
POSITIONS
Single row: 1 thru 40
Dual row: 2 thru 80
SPECIFICATIONS:
Material:
Standard insulator: PBT, glass reinforced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Brass
Plating:
U = Gold flash (30u” optional) over nickel underplate overall
SG = Gold flash (30u” optional) over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Mating durability: 1,000 cycles
Temperature Rating:
Operating temperature: -40°C to +105°C
Soldering process temperature: 260°C
®
U
SERIES INDICATOR
2PH1 = 2.00mm Single
Row Straight
Pin Header
2PH2 = 2.00mm Dual
Row Straight
Pin Header
2PH1R = 2.00mm Single
Row Right
Angle Pin
Header
2PH2R = 2.00mm Dual
Row Right
Angle
Pin Header
FEATURES:
Single, Dual or Three Row
Tin, gold or selective gold plating options
Thru-hole or SMT mounting
Stacked and Custom length versions available
Versatile Breakaway design
Hi Temp Insulator available
APPROVALS AND CERTIFICATIONS:
UL Recognized & CSA Certified,
File no. E224053
40
2PH1
COMPLIANT
2002 / 95 / EC
®
(Add this option for thru-hole products only. All SMT products are
manufactured with Hi-Temp insulators)
L = Low profile 1.5mm insulator thickness
P = Locating pegs
BR = Board retention solder tails
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
2.00mm PIN HeADeRS
.079" [2.00] CenterlIne
Adam Technologies, Inc.
2Ph SerIeS
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
2PH1
.079 [2.00]
A
PIN 1
2PH1-16-UA
B
.079
[2.00]
.154 [3.90]
B
Ø .031 [0.80]
.110 [2.80]
.079
[2.00]
.079 [2.00]
.020 [0.51]
Recommended PCB Layout
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
2PH1r
A
.079 [2.00]
2PH1R-16-UA
PIN 1
B
.154 [3.90]
ø.031 [0.80]
.118
[3.00]
.079 [2.00]
.110 [2.80]
.079
[2.00]
B
.020 [0.51]
.079 [2.00]
Recommended PCB Layout
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
2PH2
.157 [4.00]
PIN 2
A
PIN 1
2PH2-32-UA
.079
[2.00]
B
.154
[3.90]
B
ø.031 [0.80]
.079 [2.00]
.079 [2.00]
.110 [2.80]
.079
[2.00]
.079 [2.00]
.020 [0.51] .sq
Recommended PCB Layout
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
2PH2r
A
PIN 2
.157 [4.00]
2PH2R-32-UA
PIN 1
.079
[2.00]
B
B
ø.031 [0.80]
.154 [3.90]
.079 [2.00]
.079 [2.00]
.118 [3.00]
.079 [2.00]
.079
[2.00]
.020 [0.51] .sq
.110 [2.80]
Recommended PCB Layout
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM
281
2.00mm PIN HeADeRS
.079" [2.00] CenterlIne
Adam Technologies, Inc.
2Ph SerIeS
2PH1-SMT PIN 1
.079 [2.00]
TYPE B
2PH1 (SMT)
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
PIN 1
2PH1-15-UA-SMT
.079 [2.00]
TYPE A
Recommended PCB Layout
A
B
.079
[2.00]
.059
[1.50]
.086 [2.20]
.020
[0.50] Sq.
.079 [2.00]
2PH2-SMT
.157
[4.00]
.165
[4.20]
B
.079 [2.00]
.033
[0.85]
B
.033
[0.85]
.185
[4.70]
.185
[4.70]
.092 [2.35]
SMT-A
SMT-B
2PH2 (SMT)
A = .079" [2.00] x No. of positions
PIN 2
B = .079" [2.00] x No. of spaces
.157 [4.00]
PIN 1
2PH-26-UA-SMT
.079
[2.00]
A
B
Recommended PCB Layout
.059
[1.50]
.086 [2.20]
.079 [2.00]
D2PH-1
.244
[6.20]
.020
[0.50] Sq.
A
.033 [0.85]
.264
[6.70]
.102 [2.60]
D2PH-1
A = .079" [2.00] x No. of positions
.079 [2.00]
PIN 1
B
.079 [2.00]
.157
[4.00]
B = .079" [2.00] x No. of spaces
B
D2PH1-16-UA-.235 /.100 /.400
C
.079 [2.00]
Recommended PCB Layout
E
D
PIN 2
.079 [2.00]
A
ø .031 [0.80]
.079 [2.00]
.020 [0.50] Sq.
.079 [2.00]
B
D2PH-2
A = .079" [2.00] x No. of positions
B= ..079" [2.00] x No. of spaces
.157 [4.00]
PIN 1
.079 [2.00]
B
D2PH2-32-UA-.235 /.100 /.400
C
Recommended PCB Layout
.079 [2.00]
E
B
.079 [2.00]
.079 [2.00]
D
.079 [2.00]
282
.020 [0.50] Sq.
ø.031 [0.80]
.079 [2.00]
909 rahway avenue • union, new Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.adaM-teCh.CoM