Terminal Strips, Pin Headers 264-317

.100" Header & Housing sets
.100" [2.54] CENTERLINE SINGLE & DUAL ROW
LHA, LHS, MTA, MTS & HHS SERIES
INTRODUCTION:
Adam Tech's Latching Header & Housing sets were designed to
attach wires to a PCB. This series features a friction locking header
which mates to a polarized wire housing with crimp contacts.
This set provides a secure, easy to mate connection with superior
electrical characteristics.
FEATURES:
Precision .025" sq. posts
Secure friction lock
Polarized anti-vibration design
Available in 2 - 20 positions
Mating Connectors:
All industry standard .100 centerline compatible latching headers
and housings
Specifications:
Material:
Insulator: Nylon 66, rated UL94V-2
Insulator Color: White
Contacts: Phosphor bronze and Brass
ORDERING INFORMATION
FRICTION LOCK HEADER
Contact Plating:
Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 3 Amps max.
Insulation resistance: 1000 MΩ min.
Dielectric withstanding voltage: 500V AC for 1 minute
Mechanical:
Recommended wire size: 22 to 28 Awg with .059"
O.D. insulation max.
Temperature Rating:
Operating temperature: -25°C to +85°C
LHA
TS
10
SERIES INDICATOR
LHA = Locking Header
LHS = Short Back
PIN ANGLE
TS=Straight
TRA= Right Angle
TRB= Reverse
Locking Header
Right Angle
POSITIONS
2 thru 20
Packaging:
Anti-ESD plastic bags
HOUSING
Safety Agency Approvals:
UL Recognized & CSA Certified, File no. E224053
MTA
SERIES INDICATOR
MTA = Wire housing
MTS = Short back
10
POSITIONS
2 thru 20
wire housing
CRIMP CONTACT
MTA-C
SERIES INDICATOR
MTA-C = Crimp contact
MTS-C = Crimp contact
264
www.adam-tech.com
R
PACKAGING
B=1,000 piece loose cut
R=6,000 pieces on reel
.100" Header & Housing sets
.100" [2.54] CENTERLINE
LHA & MTA SERIES
LHA
MTA
Straight
housing
.228
[5.80]
.193 [4.90]
LHA-08-TS
.453
[11.50]
.025 [0.64] SQ.
MTA-08
.100 [2.54]
A
.264
[6.70]
C
.291
[7.40]
.134 [3.40]
.311
[7.90]
.500
[12.70]
.134 [3.40]
.100
[2.54]
A
B
LHA
MTA-C
Right Angle
contact
.071
[1.80]
.535 [13.60]
.228
[5.80]
LHA-08-TRA
.025
[0.64] SQ.
.063 [1.60]
SECTION B-B
A
B
.087
[2.20]
.453
[11.50]
B
A
.291
[7.40]
.075 [1.90]
SECTION A-A
.122 [3.10]
.130
[3.30]
.126 [3.20]
.071 [1.80]
.100
[2.54]
.130
[3.30]
A
B
LHA
Reverse Right Angle
.228
[5.80]
LHA-08-TRB
.025
[0.64] SQ.
.100
[2.54]
ø.047
[ ø1.20]
.453
[11.50]
.291
[7.40]
Recommended
PCB Layout
PCB LAYOUT
.126 [3.20]
.071 [1.80]
.100
[2.54]
A
.130
[3.30]
A = .100 [2.54] x No. of Spaces
B = .100 [2.54] X No. of Spaces + .100 [2.54]
C = .100 [2.54] X No. of Spaces + .122 [3.11]
B
www.adam-tech.com
265
.100" Header & Housing sets
.100" [2.54] CENTERLINE SINGLE & DUAL ROW
LHS & MTS SERIES
LHS
MTS
Straight PCB MOUNT
housing
.252
[6.40]
.197 [5.00]
MTS-08
LHS-08-TS
.100 [2.54]
A
.327
[8.30]
.025 [0.64] SQ.
.252
[6.40]
C
.299
[7.60]
.089
[2.25]
.126 [3.20]
.504
[12.80]
.134 [3.40]
.100
[2.54]
.122
[3.10]
A
B
A = .100 [2.54] x No. of Spaces
B = .100 [2.54] X No. of Spaces + .104 [2.65]
A = .100 [2.54] x No. of Spaces
B = .100 [2.54] X No. of Spaces + .104 [2.65]
LHS
MTS-C
Right Angle PCB MOUNT
CRIMP CONTACTS
A
B
.252
[6.40]
MTS-C-R
LHS-08-TRA
B
A
.327
[8.30]
.025 [0.64] SQ.
.244
[6.20]
.130
[3.30]
.264
[6.70]
.126 [3.20]
.093 [2.35]
.100
[2.54]
A
.087
[2.20]
.134
[3.40]
B
.075 [1.90]
A = .100 [2.54] x No. of Spaces
B = .100 [2.54] X No. of Spaces + .104 [2.65]
.063 [1.60]
SECTION A-A
.100
[2.54]
ø.047
[1.20]
A = .100 [2.54] x No. of Spaces
B = .100 [2.54] X No. of Spaces + .104 [2.65]
Recommended PCB Layout
266
.071
[1.80]
www.adam-tech.com
SECTION B-B
.156" HEADER & HOUSING sets
.156" [3.96] CENTERLINE
LHB, LHC, LHD & MTB SERIES
Introduction:
Adam Tech .156" Headers and Housings are two matched sets of
Crimp Wire Housings and PCB mounted Latching Headers available
in Straight and Right Angle orientation. This system is available with
a front locking header, a rear locking header or without a locking
feature. Each of the locking types are polarized to fit in only one
direction with the housing. This system provides a sturdy, high
current, high reliability connection with or without the polarized
locking option.
Features:
Matched Latching Housing & Header system
Straight, Right Angle mounting Headers
Choice of Two Latching Types
Housings feature High pressure, Low insertion force contacts
Mating Connectors:
Adam Tech MTB series and all industry standard latching type
.156 [3.96mm] centers
POWER HEADER
12
LHB
S
A
1
POSITIONS
SERIES
INDICATOR 2 thru 20
LHB = Power
PIN TYPE
Header
S = Square Post
Specifications:
Material:
Insulator: Nylon 66, rated UL94V-2
Insulator Color: Natural
Contacts: Phosphor bronze and Brass
Contact Plating:
Tin over copper underplate overall
PIN ANGLE
A = Straight
B = Right Angle
Electrical:
Operation voltage: 250V AC max.
Current rating: 5 Amp max.
Insulation resistance: 1000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
POWER HEADER
LHC
Mechanical:
Recommended wire size: 18 to 24 Awg
Environmental:
Operating temperature: -25°C to +85°C
TS
10
SERIES INDICATOR
LHC = Locking Header
LHD = Short Back
Locking Header
Packaging:
Anti-static plastic bags
FRICTION LOCK
/ POLARIZER
OPTION
1 = With Lock
Polarizer
2 = Without Lock
Polarizer
POSITIONS
2 thru 20
PIN ANGLE
TS=Straight
TRA= Right Angle
TRB= Reverse
Right Angle
HOUSING
Approvals and Certifications:
UL Recognized & CSA Certified, File no. E224053
MTB
SERIES INDICATOR
MTB = Wire housing
MTC = Latching Housing
12
POSITIONS
2 thru 20
CRIMP CONTACT
MTB-C
SERIES INDICATOR
MTB-C = Crimp contact
MTC-C = Crimp contact
www.adam-tech.com
R
PACKAGING
B =1000 pieces loose cut
R =6000 pieces on reel
267
.156" HEADER & HOUSING sets
.156" [3.96] CENTERLINE
LHB & MTB SERIES
LHB
LHB
Straight without back
Right Angle without back
.250 [6.35]
.250 [6.35]
B
A
LHB-08-SA2
.156
[3.96]
.156
[3.96]
.500
[12.70]
.144 [3.65]
.144 [3.65]
.126
[3.20]
.045 SQ.
[1.14]
LHB
LHB
Straight with back
right angle with back
.402 [10.20]
.402 [10.20]
B
A
.441 [11.20]
.220 [5.58]
.126
[3.20]
.045 SQ.
[1.14]
LHB-08-SB2
B
A
B
A
LHB-09-SA1
.156
[3.96]
.500 [12.70]
.130
[3.30]
.045 SQ.
[1.14]
.156
[3.96]
.500
[12.70]
LHB-09-SB1
.500 [12.70]
.045 SQ.
[1.14]
.144
[3.65]
.130
[3.30]
.500
[12.70]
.203
[5.17]
.134 [3.40]
MTB
MTB
Crimp Housing
A
Crimp Contact
B
.091
[2.30]
A
A
MTB-04
.256
[6.50]
B
B
.091 [2.30]
SECTION B-B
.094 [2.40]
.083
[2.10]
.126
[3.20]
.134 [3.40]
.630
[16.00]
.539 [13.70]
.156
[3.96]
A = .156 [3.96] x No. of Spaces
B = .156 [3.96] X No. of Positions
Recommended PCB Layout
268
www.adam-tech.com
SECTION A-A
Ø.067
[Ø1.70]
.156" HEADER & HOUSING sets
.156" [3.96] CENTERLINE
LHC & MTC SERIES
LHC
MTC
Straight with Rear Lock
Housing
.331
[8.40]
.287 [7.30]
MTC-06
.156
[3.96]
LHC-06-TS
B
A
.185
[4.70]
.240
[6.10]
B
A
.370
[9.40]
.156
[3.96]
.528
[13.40]
.146 [3.70]
.315
[8.00]
.130
[3.30]
MTC-C
LHC
Crimp contacts
Right Angle with rear lock
B
A
MTC-C-R
.142
[3.60]
.146 [3.70]
.161 [4.10]
B
A
B
A
LHC-06-TRA
SECTION A-A
.185
[4.70]
.240
[6.10]
.370
[9.40]
.083
[2.1]
.161
[4.1]
.118
[3.00]
.146
[3.70]
.156
[3.96]
.130
[3.30]
.315
[8.00]
www.adam-tech.com
.098 [2.50]
SECTION B-B
.039
[1.00]
.156
[3.96]
A = .156 [3.96] x No. of Spaces
B = .156 [3.96] X No. of Spaces + .156 [3.96]
.098
[2.50]
ø.067
[1.70]
Recommended PCB Layout
269
.156" HEADER & HOUSING sets
.156" [3.96] CENTERLINE
LHD & MTB SERIES
LHD
A = .156 [3.96] x No. of Positions
B = .156 [3.96] x No. of Spaces
Straight PBC mount
MTB
A = .156 [3.96] x No. of Positions
B = .156 [3.96] x No. of Spaces
Housing
.300 [7.62]
.156
[3.96]
MTB-08
LHD-06-TS
PIN 1
B
.120
[3.05]
A
.256
[6.50]
B
.448
[11.40]
.425
[10.80]
.630
[16.00]
.125 [3.18]
.045
[1.14] SQ.
.125
[3.18]
A
LHD
A = .156 [3.96] x No. of Positions
B = .156 [3.96] x No. of Spaces
right angle
PCB MOUNT
.300 [7.62]
.045 SQ.
[1.14]
.045 SQ.
[1.14]
LHD-06-TRA
PIN 1
LHD-06-TRB
B
.120
[3.05]
.156
[3.96]
.120
[3.05]
.156
[3.96]
.448
[11.40]
.448
[11.40]
.425
[10.80]
.425
[10.80]
.125 [3.18]
A
reveRse right angle
PCB MOUNT
.300 [7.62]
PIN 1
B
LHD
A = .156 [3.96] x No. of Positions
B = .156 [3.96] x No. of Spaces
.125 [3.18]
.115
[2.92]
.115
[2.92]
A
.141
[3.60]
.141
[3.60]
MTC-C
Crimp contact
MTC-C-R
A
B
.091
[2.30]
A
.083
[2.10]
.156
[3.96]
B
.091 [2.30]
.094 [2.40]
SECTION B-B
.126
[3.20]
.134 [3.40]
.539 [13.70]
270
Ø.067
[Ø1.70]
SECTION A-A
www.adam-tech.com
Recommended PCB Layout
Mini flex connector
Flat Cable to PCB System
MF Series
Introduction:
Adam Tech’s Mini-Flex series of connectors include cable to board,
wire to board and board to board choices. This series is designed
with a dual contact point mating system and an array of locating
posts and PCB pegs for positive alignment and friction lock mating.
Rigid, staggered solder tails provide excellent stability for rugged
use and feature kinked tails for PCB retention.
Features:
Fine .050" Pitch for Hi-Density connection
Flat heavy gauge contact blades for positive connectivity
Equipped with Polarizing posts and locating pegs
Positive Friction Locking mating
Kinked solder tails for PCB retention
Specifications:
Material:
Insulator: Polyester, glass filled, rated UL94V-0
Insulator Color: Red
Contacts: Phosphor Bronze or Brass
Plating:
Tin over Copper underplate overall
Electrical:
Operating Voltage: 250V AC
Current Rating: 1.2 Amps Max.
Contact Resistance: 10 mΩ Max.
Insulation Resistance: 1000 MΩ Min.
Dielectric Withstanding Voltage: 750V AC for 1 Minute
ORDERING INFORMATION
MPH
20
F
Temperature Rating:
Operation Temperature: -25°C ~ +105°C
Plating
SG = Selective Gold
plating in contact
area and Tin
plating on tails
T = Tin Plated
SERIES INDICATOR
MPH=Male
MPF=Female
MFC=Flat Cable
DIP Plug
Packaging:
Anti ESD plastic trays or Tubes
Safety Agency Approvals:
UL Recognized
CSA Certified
Approvals and Certifications:
UL Recognized & CSA Certified, File no. E224053
Positions
4, 6, 8, 10, 12, 14,
16, 18, 20, 24, 26
T
Type
F = Flat Cable IDC
V = Straight PCB Mount
H = Right Angle PCB Mount
SMT = Straight Surface Mount
OPtions
15 = 15u" Gold on contact area
30 = 30u" Gold on contact area
L = Locking Flange
www.adam-tech.com
271
Mini flex connector
Male & Female PCB Mount
MF Series
MPH
PCB Male Header
MPH-20-V-SG
ø
Recommended PCB Layout
MPF
PCB Female Header
MPF-20-V-SG-L
OPTIONAL
LOCK
ø
Recommended PCB Layout
MPF
PCB Female Header Right Angle
OPTIONAL
LOCK
MPF-20-H-SG
ø
Recommended PCB Layout
272
www.adam-tech.com
Mini flex connector
Male & Female PCB-SMT
MF Series
MPH
PCB Male Header SMT
MPH-20-SMT-SG
Recommended PCB Layout
MPF
PCB feMale Header SMT
MPF-20-SMT-SG
Recommended PCB Layout
www.adam-tech.com
273
Mini flex connector
Flat Cable IDC
MF Series
MPH
IDC Male plug
MPH-20-F-SG
MFC
Flat Cable to PCB Plug
MFC-20-F-SG
Ø.031[0.80]
B
Recommended PCB Layout
274
www.adam-tech.com
Memory sockets
memory stick, smart media,
secure digital & PCMCIA
compact flash
Introduction:
Adam Tech’s Memory Connector series is a complete range of
memory sockets for most memory card applications including
Compact Flash, PCMCIA, Memory Stick and Secure Digital. Our
advanced designs are focused on their ease of use, mating
accuracy, card retention and cycle life. Precision engineered,
extremely durable mating contacts and PCB leads contribute to a
solid, high reliability, long life design.
Memory Stick
Features:
Multitude of sockets to satisfy most applications
Precision, compact designs
Fine pitched, heavy duty contacts
Sockets conform to CFA, JEIDA, PCMCIA & JEDEC
MS-10-A-SG
Pg 276
Micro Secure Digital
(Push-Push Type)
Mating options:
All industry standard memory cards
Specifications:
MCSP-08-C-SG (Reverse Type)
Pg 276
Material:
Insulator: PA9 or LCP, glass reinforced, rated UL94V-0
Contacts: Phosphor Bronze
Frame / shield: Brass, nickel plated
Mini Secure Digital
Contact Plating:
Gold over nickel underplate on contact area, tin over copper
underplate on tails.
Electrical:
Operation voltage: 250V AC max.
Current rating: 0.5 and 1 Amps max.
Contact resistance: 40 mΩ max. initial
Insulation resistance: 1000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
MSD-11-B-SG (Standard Type)
Pg 278
Mechanical:
Mating durability: 10,000 cycles min.
Temperature Rating:
Operating temperature: -20°C to +85°C
Compact Flash
Packaging:
Anti-ESD plastic trays
Safety Agency Approvals:
UL Recognized & CSA Certified, File no. E224053
CFA-50-A-SG-B-1
Pg 280-281
Compact Flash
CFA-50-A-SMT-A
Pg 279
OPTIONS:
Add designator(s) to end of part number
30 = 30 µin gold plating in contact area
www.adam-tech.com
275
micro stick, memory stick &
sim card socket
memory sockets
MICRO MEMORY STICK
.358
[9.10]
CARD
DETECT
MMSP-11-A-SG
.033
[0.85]
.590
[15.00]
.031 X .055
[0.80 X 1.40]
.118 [3.00]
.606
[15.40]
.043
[1.10]
.358
[9.10]
.033
[0.85]
.021 X .055
[0.55 X 1.40]
.453
.354
[11.50]
[9.00]
Ø.039
[1.00]
.535
[13.60]
.079
[2.00]
.047 X .094
[1.20 X 2.40]
.630 [16.00]
.535
[13.60]
Recommended PCB Layout
MEMORY STICK
1.102 [28.00]
1.063 [27.00]
MS-10-A-SG (Normal Type)
.649
[16.50]
.290
[7.375]
.108 [2.75]
.130 X .150
[3.30 X 3.80]
.850 [21.60]
.757 [19.25]
.650
[16.50]
.457
[11.60]
.023
[0.60]
.149 [3.80]
.193 [4.90] 1.161[4.10]
.732
[18.60]
.059
[1.50]
.291 [7.40]
.177
[4.50]
.067
[1.70]
Ø.083 [2.10]
.118 X .035
[3.00 X 0.90]
.531
[13.50]
Recommended PCB Layout
SIM CARD SOCKET
SCC-06-SG-HC-NS
1.169 [29.70]
.031
[0.80]
LOCK
OPEN
.606 .677
[15.40] [17.20]
Ø.051
[1.30]
COVER
(OPEN POSITION)
.100
[2.54]
.078
[2.00]
.472
[12.00]
ALSO AVAILABLE WITH SWITCH
.024
[0.62]
BODY
.090 [2.30]
.622 [15.80]
276
1.070 [27.20]
.622
[15.80]
.047
[1.20]
.100
[2.54]
Ø.068 [1.75]
Recommended PCB Layout
.035
[0.90]
www.adam-tech.com
SECURE DIGITAL
memory sockets
.006
[0.15]
.006 [0.15]
SW#1
SW#3
SW#2
SECURE DIGITAL
.059
[1.50]
SD-09-B-SG
.217
[5.50]
.878
[22.30]
8
7
.917
[23.30]
6 5 4 3 2 1
.104 [2.65]
9
.134
[3.40]
1.079 [27.40]
.965 [24.50]
.014 [0.35]
.976 [24.80]
.943 [23.95]
.590
[15.00]
.049
[1.25]
SECURE DIGITAL
METAL COVER
.079
[2.00]
SDM-09-A-SG-0
.095 [2.425]
.067 [1.70]
.047
[1.20]
.984
[25.00]
.110 [2.80]
.590
[15.00]
.031 [0.80]
87 6 5 4 3 2 1 9
.063
[1.60]
.043
[1.10]
.110
[2.80]
1.047 [26.60]
.846
[21.50]
.827
[21.00]
.988 [25.10]
.110 [2.80]
.059 [1.50]
1.075 [27.30]
.102 [2.60]
Recommended PCB Layout
.826 [21.00]
SECURE DIGITAL
PUSH IN / PUSH OUT
.850 [21.60]
1.118 [28.40]
.098 [2.50]
.020
[0.50]
.079
[2.00]
.098
[2.50]
.752 [19.10]
.685 [17.40]
.591
[15.00]
.425
[10.80]
.787
[20.00]
.059
[1.50] SQ.
.362
[9.20]
.425
[10.80]
.108 [2.75]
.368 [9.35]
.098 [2.50]
.335
[8.50]
0.9510
SDP-09C-SG
.362
[9.20]
.547
[13.90]
.827
[21.00]
.610
[15.50]
Recommended PCB Layout
www.adam-tech.com
277
miNI & MICRO
SECURE DIGITAL socketS
memory CONNECTORS
MINI SECURE DIGITAL
MSD-11-B-SG (Standard Type)
.890 [22.60]
.512
[13.00]
.079
[2.00]
.102
[2.60]
.138 3.50]
.650
[16.50]
.022
[0.55]
.709
[18.00]
Ø.057
[1.45]
WITHOUT CARD
WITH CARD
.936 [23.77]
.051
[1.30]
.079
[2.00]
MINI SECURE DIGITAL
(Push - Push Type)
MSDPR-11-B-SG (Reverse Type)
.815
[20.70]
.023
[0.60]
Ø.039
[1.00]
.783
[19.90]
.073
[1.85]
.012
[0.30]
MICRO SECURE DIGITAL
(Push - Push Type)
MCSP-08-C-SG
.571
[14.50]
.579
[14.70]
.437
[11.10]
WITHOUT CARD
.031
[0.80]
278
.315
[8.00]
Ø.031 [0.80]
WITH CARD
www.adam-tech.com
Compact Flash sockets
Straddle mount & surface mount
MP Series
50 PIN COMPACT FLASH SOCKET
STRADDLE MOUNT
.025
[0.64
.118 [3.00]
.236
.118
[6.00]
[3.00]
1.20 [30.48]
.035 [0.89]
.079
[2.00
Recommended PCB Layout
1.299 [33.00]
1.413 [35.90]
.100 [2.54]
1.20 [30.48]
.050 [1.27]
CFS-50-A-SG-SM
.130 [3.30]
POS 50
.013
[0.35]
.045 [1.15]
50 PIN COMPACT FLASH SOCKET
.090
[2.30]
SURFACE MOUNT
1.225 [31.11]
.025 [0.635]
.016 [0.40]
1.225 [31.11]
.025 [0.635]
.039 [1.00]
.102 [2.60]
.118 [3.00]
Recommended PCB Layout
.236
[6.00]
1.299 [33.00]
1.413 [35.90]
CFS-50-A-Smt-b
1.20 [30.48]
.050 [1.27]
.130
[3.30]
.051 [1.30]
OFF-SET
68 PIN COMPACT FLASH SOCKET
.025
[0.64]
STRADDLE MOUNT
ADAM TECH PART NO.
“X” OFFSET
CFS-50-A-SMT-B
.012 [0.30]
CFS-50-A-SMT-C
.023 [0.60]
CFS-50-A-SMT-D
.035 [0.95]
1.650 [41.91]
.035 [0.89]
.079
[2.00]
1.650 [41.91]
.050 [1.27]
.015 [0.40]
Recommended PCB Layout
.118 [3.00]
1.750 [44.45]
1.828 [46.45]
.100 [2.54]
.051 [1.30]
CFS-68-A-SG-SM
1.65 [41.91]
.130 [3.30]
.013
[0.35]
www.adam-tech.com
279
Compact Flash sockets
TYPE 1 & ejecter
MP Series
50 PIN COMPACT FLASH, TYPE 1
#50
#26
#25
#1
.050 [1.27]
1.200 [30.48]
.203
[5.16]
Part Nos. Available
CF1-50-A-SG (Standard Type)
CF1R-50-A-SG (Reverse Type) Not Shown
1.417 [36.00]
.440 [11.20]
.315 [8.00]
.625
[15.90]
1.043
[26.50]
1.927 [48.96]
.236 [6.00]
ø.047
[1.20]
.157 [4.00]
.025
[0.635]
.122 [3.10]
.094
[2.40]
1.630 [41.40]
.118
[3.00]
.015 [0.40]
.094 [2.40]
.090
[2.30]
1.842 [46.80]
.626
[15.90]
.025 [0.635]
1.225 [31.115
1.630 [41.40]
1.732 [44.00]
.267 [6.80]
.078
[2.00]
1.732 [44.00]
50 PIN COMPACT FLASH, EJECTOR
(For use with CF1 and CF1R series sockets)
.944 [24.00]
.157
[4.00]
.394
[10.00]
.173
[4.40]
BENDABLE
BUTTON
OPTION
.820
[20.85]
.177
[4.50]
Part Nos. Available
CFE-50-L15 (15.0mm long Ejector button)
CFE-50-L20 (20.0mm long Ejector button)
CFE-50-L22 (22.0mm long Ejector button)
.670
[17.00]
1.039
[26.40]
.687
[17.45]
.177
[4.50]
.198
[5.05]
280
1.875 [47.64]
2.055 [52.20]
www.adam-tech.com
Compact Flash sockets
50 pin slim type
MP Series
#50
#26
50 PIN COMPACT FLASH,
.078
[2.00]
SLIM TYPE (FITS CF TYPE 1 AND 2)
#1
#25
1.911 [48.56]
ø.023
[0.60]
1.842 [46.80]
1.200 [30.48]
.050 [1.27]
.728 [18.50]
ø.063
[1.60]
1.023
[26.00]
.025
[0.635]
.110
[2.80]
X
.047 [1.20]
OPTIONAL
STANDOFF
DIM X
1.581 [40.16]
1.525 [38.74]
CFA-50-A-SG-B-1
.157 [4.00]
ALSO AVAILABLE WITH EJECTOR
CFA-50-A-SG-1 (Standard Type, 40.16mm)
CFR-50-A-SG-C-1 (Reverse Type, 40.16mm, Standoff 1.4mm)
CFA-50-A-SG-2 (Standard Type, 38.74mm)
CFR-50-A-SG-2 (Reverse Type, 38.74mm)
1.811 [46.00]
OPTIONAL STANDOFF
.047 [1.20] STANDARD TYPE
.055 [1.40] REVERSE TYPE
50 PIN COMPACT FLASH,
SHORT SLIDE Type (FITS TYPE 2)
#50
#25
#26
.078
[2.00]
#1
1.200 [30.48]
1.913 [48.61]
CF-50-C-SG
.050 [1.27]
.748
[19.00]
2.025 [51.46]
ø.063
[1.60]
.098 [2.50]
.025
[0.635]
1.525 [38.74]
1.842 [46.80]
.177 [4.50]
.118
[3.00]
.315
[8.00]
ø.070 [1.80]
.157 [4.00]
.015 [0.40]
.122 [3.10]
.118 [3.00]
.137
[3.50]
.025 [0.635]
1.225 [31.115]
ø.086
[2.20]
1.525 [38.74]
www.adam-tech.com
281
0.80mm SUB-MICRO HEADERS
1.00mm MICRO HEADERS
.031" [0.80] & .039" [1.00] CENTERLINE
MPH & SPH / MRS & SRS
Introduction:
Adam Tech 0.8mm and 1.00mm Pin Header and Female Header
series is a fine pitch, low profile, dual row, PCB mounted connector
set intended for limited space applications or where total weight
is a factor. Our specially tooled insulators and contacts maintain
consistent high quality through our automated production processes.
Each series is available in thru-hole PCB or SMT mounting and
plated tin, gold or selective gold as specified.
Features:
0.8mm and 1.0mm versions
Pin Header and Female Header set
Lightweight and Compact
Hi Temp Insulators
Mating Options:
Mates with all industry standard 0.8mm & 1.0mm pitch headers and
female headers
Specifications:
Material:
Standard Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Phosphor Bronze
Plating:
U =Gold over nickel underplate
SG=Gold over nickel underplate on
contact area, tin over copper underplate on tails.
T =Tin over copper underplate overall.
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Mating durability: 500 cycles min.
0.8mm Male ORDERING INFORMATION
20
SPH2
POSITIONS
04 thru 80
20
SRS2
SG
SMT
MOUNTING
Blank =Thru-hole
SMT =Surface
mount
SERIES
INDICATOR
SRS2=
0.8mm Dual Row
Female Header
POSITIONS
04 thru 80
PLATING
U=Gold plated
SG=Selectively gold plated
T=Tin plated
1.0mm Male ORDERING INFORMATION
20
MPH2
SG
SMT
MOUNTING
Blank =Thru-hole
SMT =Surface mount
PLATING
U=Gold plated
SG=Selectively gold plated
T=Tin plated
1.0mm FEMale ORDERING INFORMATION
Approvals and Certifications:
UL Recognized & CSA Certified, File no. E224053
20
MRS2
SERIES
INDICATOR
MRS2=
1.0mm Dual Row
Female Header
POSITIONS
04 thru 80
282
PLATING
U=Gold plated
SG=Selectively gold plated
T=Tin plated
0.8mm FEMale ORDERING INFORMATION
POSITIONS
04 thru 80
Packaging:
Anti-ESD plastic bags or tubes
SMT
MOUNTING
Blank =Thru-hole
SMT =Surface mount
SERIES
INDICATOR
SPH2=
0.8mm Dual Row
Female Header
SERIES
INDICATOR
MPH2=
1.0mm Dual Row
Pin Header
Temperature Ratings:
Operating temperature: -40°C to +105°C
Max process temp: 230°C for 30 ~ 60 seconds
(260°C for 10 seconds)
Soldering process temperature: 260°C
SG
www.adam-tech.com
SG
SMT
MOUNTING
Blank =Thru-hole
SMT =Surface mount
PLATING
U=Gold plated
SG=Selectively gold plated
T=Tin plated
0.8mm SUB-MICRO HEADERS
1.00mm MICRO HEADERS
.031" [0.8] & .039" [1.00] CENTERLINE
MPH & SPH / MRS & SRS
0.8mm sub-Micro Headers
A
B
A
B
A
A
.120
[3.05]
.120
SPH2-60-UA
[3.05]
B
.031
B [0.80]
.047
[1.20]
.047
.031 [0.80]
.078 [2.00]
.120
[3.05]
.120
.031 [0.80]
.012 [0.30] SQ.
A = .031 [.80] X No of Positions Per Row
B
Per
Row
A=
= .031
.031 [.80]
[.80] X
X No
No of
of Spaces
Positions
Per
Row
.082 [2.10]
.039 [1.00]
.039 [1.00]
0.8mm Male Header
SPH2 Series
B = .031 [.80] X No of Spaces Per Row
A
B
A
B
.120
[3.05]
.120
[3.05]
SPH2-60-UA-smt
.031 [0.80]
.031 [0.80]
.047
[1.20]
.047
.039 [1.00]
.110
[2.79]
.110
ø.025
[ø0.65]
[1.00]
ø.025
C
A = .031 [.80] X No of Positions Per Row [ø0.65]
B
Per
Row
A=
= .031
.031 [.80]
[.80] X
X No
No of
of Spaces
Positions
Per
Row
C
1 Row
B=
= .031
.031 [.80]
[.80] X
X No
No of
of Spaces
Spaces -Per
C = .031 [.80] X No of Spaces - 1
.181
[4.60]
.181
.051 [1.30]
*Also available
without peg
*Also available
without peg
[4.60]
0.8mm SMT Male Header
SPH2 SMT Series
.039
[1.00]
.039
.031 [0.80]
.118
[3.00]
.118
[3.00]
.012 x .008
[0.3 xx 0.2]
.012
.008
C x 0.2]
[0.3
ø.025
[ø0.65]
ø.025
C
[ø0.65]
A = .031 [.80] X No of Positions
Per Row
B
Per
Row
A=
= .031
.031 [.80]
[.80] X
X No
No of
of Spaces
Positions
Per
Row
C
1 Row
B=
= .031
.031 [.80]
[.80] X
X No
No of
of Spaces
Spaces -Per
[1.00]
.120SRS2-60-UA-SMT
[3.05]
.120
[3.05]
.127 [3.25]
.031 [0.80]
.051 [1.30]
.012 [0.30] SQ.
C [0.30] SQ.
.012
.127 [3.25]
0.8mm Female Header
SRS2 Series
B = .031 [.80] X No of Spaces Per Row
A
B
A
B
[1.20]
.039 [1.00]
.078 [2.00]
.127 [3.25]
.012 x .010
[0.3 xx 0.2]
.012
.010
[2.79]
[0.3 x 0.2]
A = .031 [.80] X No of Positions Per Row
B
=
.031
[.80]
X
No
of
Per
Row
A = .031 [.80] X No of Spaces
Positions
Per
Row
.047
[1.20]
.047
[1.20]
[3.05]
.118
[3.00]
.118
[3.00]
.082 [2.10]
.012 [0.30] SQ.
.039
[1.00]
.039
SRS2-60-UA
.031 [0.80]
[1.20]
.078 [2.00]
.078 [2.00]
.047
[1.20]
.047
[1.20]
C = .031 [.80] X No of Spaces - 1
.127 [3.25]
.181
[4.60]
.181
[4.60]
*Also available
without peg
*Also available
without peg
0.8mm SMT Female Header
SRS2 SMT Series
1.0mm Micro Headers
A
B
A
B
A
.125
[3.17]
.125
[3.17]
.68[
.075 [1.90]
.68[
.075 [1.90]
A
MPH2-60-UA
B
.039
B [1.00]
.039 [1.00]
.012 [0.30] SQ.
.012 [0.30] SQ.
A = .039 [1.00] X No of Positions Per Row
B
Per
Row
A=
= .039
.039 [1.00]
[1.00] X
X No
No of
of Spaces
Positions
Per
Row
.039
[1.00]
.039
[1.00]
.059
[1.49]
.059
[1.49]
1.0mm Male Header
MPH2 Series
B = .039 [1.00] X No of Spaces Per Row
.039
[1.00]
.039
[1.00]
[3.17]
.075 [1.90]
.039 [1.00]
.110
.014 [.36]
[2.79]
.110
.014 [.36]
[2.79]
A = .039 [1.00] X No of Positions Per Row
B
Per
Row
A=
= .039
.039 [1.00]
[1.00] X
X No
No of
of Spaces
Positions
Per
Row
.039
[1.00]
.039
[1.00]
.039 [1.00]
MRS2-60-UA-SMT
.039
[1.00]
.039
[1.00]
.039 [1.00]
B = .039 [1.00] X No of Spaces Per Row
.059
[1.49]
.059
[1.49]
.205
[5.21]
.205
[5.21]
.084
[2.12]
.084
[2.12]
.071
[1.80]
.071
.014 [.36]
.014 [.36]
[1.80]
1.0mm SMT Male Header
MPH2-SMT Series
.100
[2.54]
.100
[2.54]
.087 [2.21]
.039 [1.00]
.075 [1.90]
A = .039 [1.00] X No of Positions Per Row
B
Per
Row
A=
= .039
.039 [1.00]
[1.00] X
X No
No of
of Spaces
Positions
Per
Row
1.0mm Female Header
MRS2 Series
A
B
A
B
.039 [1.00]
.012 [0.30] SQ.
.039
[1.00]
.039
[1.00]
B = .039 [1.00] X No of Spaces Per Row
MPH2-60-UA-SMT
.012 [0.30] SQ.
.100
[2.54]
.100
[2.54]
.039 [1.00]
.084
[2.12]
.084
[2.12]
A
B
A
B
.125
[3.17]
.125
MRS2-60-UA
A = .039 [1.00] X No of Positions Per Row
B
Per
Row
A=
= .039
.039 [1.00]
[1.00] X
X No
No of
of Spaces
Positions
Per
Row
.087 [2.21]
.150
[3.81]
.150
[3.81]
1.0mm SMT Female Header
MRS2-SMT Series
B = .039 [1.00] X No of Spaces Per Row
www.adam-tech.com
283
.050" PIN HEADERS
.050" [1.27] CENTERLINE
HPH SERIES
Introduction:
Adam Tech .050" HPH Series Pin Headers are fine pitched, low profile,
PCB mounted pin headers intended for limited space applications
or where overall size is a factor. Our specially tooled insulators and
contacts offer consistent high quality through automated production
processes. This series offers an extensive range of single, dual
and stacked versions. Each is available in thru-hole PCB or SMT
mounting with choice of tin, gold or selective gold plating.
Features:
Single and Dual Row
Stacked, Thru-Hole and SMT mounting
Pin Header and Female Header sets
Lightweight and Compact
Hi Temp Insulator available
Choice of plating
ORDERING INFORMATION
HPH2
Mating options:
Mates with all industry standard .050" [1.27mm] pitch female
headers designed for use with 0.4mm Sq. pins and Low profile
receptacle
Specifications:
Material:
Standard Hi-Temp insulator: Nylon 6T or Nylon 46, rated UL94V-0
Insulator Color: Black
Contacts: Brass or Phosphor Bronze
Plating:
U = Gold over nickel underplate overall
SG = Gold over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩ max. Initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Mating durability: 500 Cycles min.
SERIES
INDICATOR
HPH1=
050" Single row
Pin Header
HPH2=
.050" Dual Row
Pin Header
Packaging:
Anti-ESD plastic bags
Approvals and Certifications:
UL Recognized & CSA Certified, File no. E224053
SMT = Dual Row Surface Mount leads with Hi-Temp insulator for Hi-Temp
soldering processes up to 260°C
SMT-A= Single Row Surface Mount Leads Type A
SMT-B= Single Row Surface Mount Leads Type B
P= Optional locating peg
284
SG
A
MATING/
SOLDER-TAIL
LENGTH
A = Standard length
B=Special length,
customer specified,
defined as tail
length/total length
POSITIONS
01 thru 32
(single row)
04 thru 100
(dual row)
PLATING
SG = Selective gold
plating in
contact area
Tin plating
on solder tails
U = Gold Plated
T = Tin Plated
ORDERING INFORMATION
2
SERIES
INDICATOR
DHPH=
Dual insulator
.050" centerline
Pin Header
OPTIONS:
Add designator(s) to end of part number
HT = Hi-Temp insulator for Hi-Temp soldering processes up to 260°C
(Add this option for thru-hole products only. All SMT products are manufactured
with Hi-Temp insulators)
100
INSULATOR
SIZE
A=1.00mm insulator thickness
single or dual row
(dual row .050"x.050")
B=.100" insulator thickness
single or dual row
(dual row .050"x.100")
DHPH
Temperature Rating:
Operating temperature: -40°C to +105°C
Soldering process temperature: 260°C
B
NO. OF ROWS
1=Single row .050"
2=Dual row
.050"x.100"
www.adam-tech.com
50
SG
.XXX"/.XXX"/.XXX"
(C DIM) (D DIM) (E DIM)
SPECIFIED IN INCHES
AS: C Dim./D Dim./E Dim.
(replace D Dim. with SMT
for surface mount option)
PLATING
SG=Selective gold plating in
contact area and Tin
plating on solder tails
U = Gold Plated
T = Tin Plated
POSITIONS
01 thru 50 (single row)
04 thru 100 (dual row)
.050" PIN HEADERS
.050" [1.27] CENTERLINE
HPH SERIES
A = .050 [1.27] X No. of Positions
B = .050 [1.27] X No. of Spaces
PIN 1
HPH1-A
.082 [2.10]
Single Row Straight
with 1.00mm Insulator
A
B
.050 [1.27]
PCB Layout
Recommended
PCB Layout
.039 [1.00]
B
.050 [1.27]
ø .026
[0.65]
.118 [3.00]
.090 [2.30]
HPH1-A-20-UA
.016 [0.40] SQ.
A = .050 [1.27] X No. of Positions
B = .050 [1.27] X No. of Spaces
PIN 1
Single Row Straight
with .100" Insulator
A
B
.050 [1.27]
Recommended PCB Layout
PCB Layout
HPH1-B
.100 [2.54]
.018 [0.46] SQ.
.118 [3.00]
B
.050 [1.27]
ø .030
[0.75]
A = .050 [1.27] X No. of Positions per row
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
.100 [2.54]
PIN 2
HPH2-A
.136 [3.45]
Dual Row Straight
with 1.00mm Insulator
PIN 1
A
B
.050 [1.27]
PCB Layout
B
.050 [1.27]
HPH1-B-20-UA
.105 [2.66]
.050 [1.27]
.016 [0.40] SQ.
ø .026
[0.65]
.039 [1.00]
.050
[1.27]
.118 [3.00]
HPH2-A-40-UA
.090 [2.30]
A = .050 [1.27] X No. of Positions per row
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
PIN 2
HPH2-B
.100 [2.54]
A
B
.050 [1.27]
PCB Layout
B
.050 [1.27]
Dual Row Straight
with .100" Insulator
PIN 1
.197
[5.00]
ø .030
[0.75]
.118 [3.00]
.100 [2.54]
.105 [2.66]
.100
[2.54]
HPH2-B-40-UA
.018 [0.46] SQ.
A = .050 [1.27] X No. of Positions
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
PCB Layout
B
.050 [1.27]
Single Row Straight SMT
with 1.00mm Insulator
A
B
.050 [1.27]
.016 [0.40] SQ.
.105 [2.68]
.189 [4.80]
.118 [3.00]
.094 [2.40]
A = .050 [1.27] X No. of Positions
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
HPH1-A-20-UA-SMT
.039 [1.00]
.030 [.76]
HPH1-B (SMT)
.082 [2.10]
PIN 1
Single Row Straight SMT
with .100" Insulator
A
B
.050 [1.27]
B
.050 [1.27]
.242 [6.15]
HPH1-A (SMT)
.082 [2.10]
PIN 1
.118 [3.00]
.094 [2.40]
.030 [.76]
.100 [2.54]
.150 [3.81]
.018 [0.46] SQ.
www.adam-tech.com
HPH1-B-20-UA-SMT
285
.050" PIN HEADERS
.050" [1.27] CENTERLINE
HPH SERIES
A = .050 [1.27] X No. of Positions per row
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
ø .035
[ 0.90]
PIN 2
PCB Layout
B
A
B
.050 [1.27]
.094 [2.40]
.248 [6.30]
HPH2-A (SMT)
.136 [3.45]
PIN 1
.016 [0.40]
SQ.
.050 [1.27]
.118 [3.00]
.039 [1.00]
HPH2-A-40-UA-SMT
optional peg
.050 [1.27]
ø .031 [ 0.80]
.027 [0.70]
A = .050 [1.27] X No. of Positions per row
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
.066
[1.68]
.217 [5.50]
Dwg. shown with optional peg
PIN 2
HPH2-B (SMT)
.100 [2.54]
PIN 1
B
A
B
.050 [1.27]
.094 [2.40]
.200
[5.08]
.287 [7.30]
.118 [3.00]
.100 [2.54]
.050 [1.27]
.027 [0.70]
A = .050 [1.27] X No. of Positions
B = .050 [1.27] X No. of Spaces
HPH2-B-40-UA-SMT
.018 [0.46] SQ.
PIN 1
Recommended PCB Layout
DHPH-1
.100 [2.54]
A
B
PCB Layout
C
.100 [2.54]
B
.050 [1.27]
ø.030
[0.75]
E
D
A = .050 [1.27] X No. of Positions per row
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
PIN 2
.100 [2.54]
PIN 1
PCB Layout
B
.050 [1.27]
DHPH-1-20-U-.079/.079/.354
.018 [0.46] SQ.
DHPH-2
A
B
.197 [5.00]
C
ø.030
[0.75]
.100 [2.54]
E
.100
[2.54]
D
A = .050 [1.27] X No. of Positions
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
.018 [0.46] SQ.
.100 [2.54]
PIN 1
DHPH-2-32-U-.079/.079/.354
DHPH-1 (SMT)
A
B
B
.050 [1.27]
C
.100 [2.54]
.189 [4.80]
E
.121 [3.08]
.150 [3.81]
.030 [0.76]
A = .050 [1.27] X No. of Positions per row
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
PIN 2
DHPH-2 (SMT)
.100 [2.54]
PIN 1
A
B
B
.197 [5.00]
C
.121 [3.08]
.287 [7.30]
.018 [0.46] SQ.
.100 [2.54]
E
.050 [1.27]
286
DHPH-1-10-U-.079/SMT-A/.3.54
.018 [0.46] SQ.
.150
[3.81]
.027 [0.70]
www.adam-tech.com
DHPH-2-40-U-.079/SMT/.3.54
.050" male & female HEADER SET
.050" [1.27] CENTERLINE
HSH & HFH SERIES
MALE HEADER
PCB LAYOUT
Recommended
PCB Layout
B
C
C
.050 [1.27]
PIN 2
.130 [3.30]
ø .026 [ø 0.65]
.050 [1.27]
PIN 1
.050 [1.27]
Standard: With key & without peg
.211
[5.35]
A
ORDERING INFORMATION
A = .050 X No. of Spaces + .168 [4.27]
B = .050 X No. of Spaces + .074 [1.87]
C = .050 X No. of Spaces
.213
[5.40]
.094 [2.40]
50
HSH
G
PLATING
G=Gold plated
T=Tin plated
SG =Gold plating
in contact
area, tin
TOTAL
plated
POSITIONS solder tails
10 thru 100
SERIES
INDICATOR
HSH=
.050" Shrouded
Male header
OPTIONS:
SMT =Surface mount leads with
Hi-Temp insulator
P =Peg option (thru hole only)
PIN 2
PCB LAYOUT
C
B
C
ø .051
[ø 1.30]
.126 X .027
[3.20 X 0.70]
PIN 1
.050 [1.27]
.050 [1.27]
D
.211
[5.35]
A
.213
[5.40]
Standard: With key & with peg
A = .050 X No. of Spaces + .168 [4.27]
B = .050 X No. of Spaces + .074 [1.87]
C = .050 X No. of Spaces
D = .050 X No. of Spaces + .120 [3.05]
.039
[1.00]
.016 [0.40] SQ.
ø .039
[ø 1.00]
PIN 2
.236
[6.00]
ø .027
[ø .70]
A
B
.050 [1.27]
HSH-SMT Series
Shrouded male header
Recommended PCB Layout
PCB LAYOUT
.050 [1.27]
B
.050 [1.27]
PIN 1
.050 [1.27]
.025 [0.65]
.144
[3.65]
ORDERING INFORMATION
50
G
PLATING
G=Gold plated
T=Tin plated
SG =Gold plating
in contact
area, tin
TOTAL
plated
POSITIONS solder tails
10 thru 100
SERIES
INDICATOR
HFH=
.050" Female header
OPTIONS:
SMT =Surface mount leads
with Hi-Temp insulator
NP =No peg
NK =No Key
P =Peg option (thru hole only)
Shrouded male header
Recommended PCB Layout
FEMALE HEADER
HFH
HSH Series
.050
[1.27]
.016 [0.40] SQ.
Standard: With key & without peg
.118
[3.00]
A = .050 X No. of Spaces + .068 [1.73]
B = .050 X No. of Spaces
C = .050 X No. of Spaces + .120 [3.05]
.173
[4.40]
.106
[2.70]
HFH Series
.016 X .005
[0.40 X 0.12]
Shrouded female header
Recommended PCB Layout
.054
[1.38]
B
A
B
.050 [1.27]
ø .051
[ø 1.30]
.126 X .027
[3.20 X 0.70]
.050
[1.27]
.016 X .005
[0.40 X 0.12]
.144
[3.65]
ø .047 [ø1.20]
C
www.adam-tech.com
.118
[3.00]
Standard: With key & with peg
A = .050 X No. of Spaces + .068 [1.73]
B = .050 X No. of Spaces
C = .050 X No. of Spaces + .120 [3.05]
.173
[4.40]
ø .033
[ø 0.85]
.050 [1.27]
C
.216
[5.50]
HFH-SMT Series
Shrouded female header
287
.050" BOX HEADERS
.050" x .050" & .050" x .100"
CENTERLINE
HBHR SERIES
HBHR SERIES
Adam Tech HBHR Series .050" Box Headers are fine pitched, dual
row shrouded headers for use with dual row IDC female socket
connectors. Our low profile, space saving design has a center slot
for the socket’s polarization bump. Adam Tech’s Box Headers are
available in Straight PCB Mount, Right Angle PCB Mount and SMT
Mounting. Plating options include choice of Gold, Tin or Selective
Gold. SMT versions are manufactured with a Hi-Temp insulator.
Additional options include latches and custom pin lengths.
Features:
Shrouded, insulated connection
Superior low profile design
Slot for IDC socket Polarization bump
Straight PCB, Right Angle PCB and SMT versions
Gold, Tin or Selective Gold plating
Options include Elevated types and integral latches
Hi-Temp insulator available
Mating Receptacles:
Mates with all industry standard .050" [1.27mm] pitch dual row
IDC sockets
Specifications:
Material:
Standard insulator: PBT, glass reinforced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Brass
Plating:
G = Gold over nickel underplate overall
SG = Gold over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 500V AC for 1 minute
ORDERING INFORMATION
HBHR-B
20
MOUNTING
ORIENTATION
V =Vertical
mount
H = Right angle
mount
SERIES
INDICATOR
HBHR-B =
Box header
.050" x .050"
HBHR-A=
Box header
.050" x .100"
Temperature Rating:
Operating temperature: -40°C to +105°C
Soldering process temperature: 260°C
V
SG
PLATING
G=Gold plated
SG=Selective
gold plating
in contact
area, tin plated
solder tails
T =Tin plated
POSITIONS
10, 20, 30, 40,
50, 60, 70, 80,
90, 100
Packaging:
Anti-ESD plastic trays
Approvals and Certifications:
UL Recognized & CSA Certified, File no. E224053
This series is availabe in an
elevated version similar to
our BHRE Series as shown
on pgs. 322-323
OPTIONS:
Add designator(s) to end of part number­­­­­
30=30 µin gold plating in contact area
SMT=Surface mount leads with Hi-Temp insulator for
Hi-Temp soldering processes up to 260°C
HT=Hi-Temp insulator for Hi-Temp soldering processes
up to 260°C (Add this option for thru-hole products only.
All SMT products are manufactured with Hi-Temp insulators)
288
www.adam-tech.com
.050" BOX HEADERS
.050" x .050" & .050" x .100"
CENTERLINE
HBHR SERIES
.122
[3.10]
A
B
C
.050 [1.27]
HBHR-B
HBHR-B
.050" X .050"
STRAIGHT
PCB MOUNT
.050" X .050"
RIGHT ANGLE
PCB MOUNT
A
B
C
.122
[3.10]
.189
[4.8]
.189
[4.8]
.050 [1.27]
.212
[5.40]
.118
[3.0]
.212
[5.40]
.090 [2.30]
.050
[1.27]
.016 [0.40] SQ.
A = .050 [1.27] x No. of Spaces + .292 [7.43]
B = .050 [1.27] x No. of Spaces + .227 [5.77]
C = .050 [1.27] x No. of Spaces
.050
[1.27]
.016 [0.40] SQ.
A = .050 [1.27] x No. of Spaces + .292 [7.43]
B = .050 [1.27] x No. of Spaces + .227 [5.77]
C = .050 [1.27] x No. of Spaces
HBHR-A
.050" X .100"
STRAIGHT
PCB MOUNT
A
B
C
HBHR-A
A
B
C
.050" X .100"
RIGHT ANGle
PCB MOUNT
.249
[6.32]
.249
[6.32]
.050 [1.27]
.050 [1.27]
.327
[8.30]
.216
[5.50]
.327
[8.30]
.216
[5.50]
.126 [3.20]
.100
[2.54]
.016 [0.40] SQ.
.016 [0.40] SQ.
A = .050 [1.27] x No. of Spaces + .349 [8.87]
B = .050 [1.27] x No. of Spaces + .255 [6.47]
C = .050 [1.27] x No. of Spaces
A = .050 [1.27] x No. of Spaces + .349 [8.87]
B = .050 [1.27] x No. of Spaces + .255 [6.47]
C = .050 [1.27] x No. of Spaces
.122
[3.10]
A
B
C
HBHR-B
.050" X .050" SMT
HBHR-B
.050 [1.27]
.016 [0.40] SQ.
A = .050 [1.27] x No. of Spaces + .292 [7.43]
B = .050 [1.27] x No. of Spaces + .227 [5.77]
C = .050 [1.27] x No. of Spaces
.030
[0.76]
C
HBHR-A
.100 [2.54]
.205
[5.20]
.236
[6.00]
ø.032 [0.80]
.050 [1.27]
.189
[4.8]
.193
[4.90]
.100 [2.54]
ø.032 [0.80]
.050
[1.27]
.228
[5.80]
.050 [1.27]
.094
[2.40]
SMT
Recommended PCB Layouts
www.adam-tech.com
289
.050" Latch HEADERS
.050" x .050" & .050" x .100" CENTERLINE
HmHR SERIES
Introduction:
Adam Tech HMHR Series .050" Latch Headers are dual row, PCB
mounted, shrouded headers with latches for use with dual row
IDC female socket connectors. In addition to providing a shock
and vibration proof connection the locking latches also act as
ejectors to remove the mating socket. Our low profile, space
saving design has a center slot for the socket’s polarization
bump. Adam Tech’s Latch Headers are available in Straight PCB
Mount, Right Angle PCB and SMT Mounting. Plating options
include choice of Gold, Tin or Selective Gold
Features:
Integral Latches provide Shock and Vibration Proof connection
Slot for IDC socket Polarization bump
Straight PCB, Right Angle PCB and SMT versions
Gold, Tin or Selective Gold plating
Elevated option available
Hi-Temp insulator available
Mating Sockets:
.050" X .050" & .050" X .100" Dual row IDC sockets
Specifications:
Material:
Insulator: PBT, glass reinforeced, rated UL94V-0
Insulator Color: Black (Gray optional)
Contacts: Brass
ORDERING INFORMATION
Plating:
U = Gold over nickel underplate overall
SG = Gold over nickel on contact area,
Tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 500V AC for 1 minute
Mechanical:
Mating durability: 500 Cycles min.
Temperature Rating:
Operating temperature: -55°C to +105°C
Packaging:
Anti-ESD plastic trays
Safety Agency Approvals:
UL Recognized & CSA Certified, File no. E224053
26
HMHR
V
SERIES
INDICATOR
HMHR =
.050" x .100"
2 row PCB
HMHR-A =
.050" x .050"
2 row PCB
HMHR-B =
.050" x .100"
4 row PCB
A
L
LATCHING
FEATURES
S = Short latches
(for sockets
w/o strain
relief)
L = Long latches
(for sockets
w/strain relief)
N = No latches
POSITIONS
10, 16,
30, 32,
44, 50,
64, 68,
100
U
20,
34,
52,
70,
26,
40,
60,
80,
MOUNTING ANGLE
V =Straight Mount
H=Right Angle Mount
PIN LENGTHS
A=Standard length
solder tail
B=Special length,
customer specified
CONTACT PLATING
U=Gold plated
SG=Gold plating in
contact area, Tin
plated solder tails
T =Tin plated
OPTIONS:
Add designator(s) to end of part number
SMT=Surface mount leads Dual row with Hi-Temp insulator
HT=High-temp insulator for high-temp soldering processes
290
www.adam-tech.com
.050" Latch HEADERS
.050" x .050" CENTERLINE
HMHR SERIES
HmHR-A
A
B
.050" X .050"
straight PCB MOUNT
.050
[1.27]
.220
[5.60]
.050
[1.27]
HMHR-A-50-VUAS
C
B
.050
[1.27]
.326
[8.30]
.050
[1.27]
SQ. .015 [0.40]
Ø.031
[0.80]
.050
[1.27]
A = .050 [1.27] X No. of Spaces + .233 [5.92]
B = .050 [1.27] X No. of Spaces
C = .050 [1.27] X No. of Spaces + .621 [15.77]
Recommended PCB Layout
HmHR-A
.050" X .050"
right angle PCB MOUNT
A
B
.050
[1.27]
.220
[5.60]
C
HMHR-A-34-HUAS
.326
[8.30]
B
.090
[2.30]
.050
[1.27]
SQ. .015 [0.40]
.050
[1.27]
A = .050 [1.27] X No. of Spaces + .233 [5.92]
B = .050 [1.27] X No. of Spaces
C = .050 [1.27] X No. of Spaces + .621 [15.77]
.050 [1.27]
.050
[1.27]
Ø.031
[0.80]
Recommended PCB Layout
HmHR-A
A
B
.050" X .050"
vertical smt
.050
[1.27]
.220
[5.60]
.050
[1.27]
HMHR-A-60-VUAS-SMT
C
B
.334
[8.50]
REF
.326
[8.30]
SQ. .015X [0.40]
A = .050 [1.27] X No. of Spaces + .233 [5.92]
B = .050 [1.27] X No. of Spaces
C = .050 [1.27] X No. of Spaces + .621 [15.77]
.050
[1.27]
.059
[1.50]
.248
[6.30]
.030 X .094
[0.76 X 2.40]
Recommended PCB Layout
www.adam-tech.com
291
.050" Latch HEADERS
.050" x .100" CENTERLINE
HMHR SERIES
HmHR-B
.050" X .100"
straight PCB MOUNT
A
B
.323
[8.20]
.100 [2.54]
C
.602
[15.30]
.050
[1.27]
.118
[3.00]
HMHR-B-50-VUAL
.075
[1.905]
SQ. .018 [0.46]
A = .050 [1.27] X No. of Spaces + .306 [7.78]
B = .050 [1.27] X No. of Spaces
C = .050 [1.27] X No. of Spaces + .829 [21.07]
HmHR-B
.050" X .100" 4 ROW
right angle PCB MOUNT
A
B
.323
[8.20]
.100 [2.54]
.106
[2.70]
C
.602
[15.30]
.050
[1.27]
HMHR-B-60-HUAL
.075
[1.905]
SQ. .018
[0.46]
A = .050 [1.27] X No. of Spaces + .306 [7.78]
B = .050 [1.27] X No. of Spaces
C = .050 [1.27] X No. of Spaces + .829 [21.07]
Latch Options
B
.050
[1.27]
.225
[5.715]
Ø.031
[0.80]
.807
[20.50]
Header with
Short Ejector/Latch
for Sockets without
Strain Reliefs
.075
[1.905]
Recommended PCB Layout
292
www.adam-tech.com
.952
[24.20]
Header with
Long Ejector/Latch
for Sockets with
Strain Reliefs
.050" Latch HEADERS
.050" x .100" CENTERLINE
HMHR SERIES
HmHR
.050" X .100"
straight PCB MOUNT
A
B
.323
[8.20]
.100 [2.54]
HMHR-80-VUAS
C
.602
[15.30]
.050
[1.27]
SQ. .018 [0.46]
.118
[3.00]
.100
[2.54]
A = .050 [1.27] X No. of Spaces + .306 [7.78]
B = .050 [1.27] X No. of Spaces
C = .050 [1.27] X No. of Spaces + .829 [21.07]
HmHR
.050" X .100"
right angle PCB MOUNT
A
B
.323
[8.20]
.100 [2.54]
.106
[2.70]
C
HMHR-50-HUAL
.602
[15.30]
.050
[1.27]
SQ. .018
[0.46]
A = .050 [1.27] X No. of Spaces + .306 [7.78]
B = .050 [1.27] X No. of Spaces
C = .050 [1.27] X No. of Spaces + .829 [21.07]
Latch Options
B
.050
[1.27]
.807
[20.50]
.100
[2.54]
Ø.031
[0.80]
Header with
Short Ejector/Latch
for Sockets without
Strain Reliefs
.952
[24.20]
Header with
Long Ejector/Latch
for Sockets with
Strain Reliefs
Recommended PCB Layout
www.adam-tech.com
293
.050" RECEPTACLE STRIPS
.050" [1.27] CENTERLINE
HRS SERIES
Introduction:
Adam Tech HRS Series .050" Receptacle Strips are offered in
a multitude of sizes and profiles designed to satisfy most .050"
socket requirements. Available in Single and dual rows they
are offered in straight, right angle, SMT, bottom entry and
pass through PCB mounting styles. Each type has a specially
designed contact system which produces a high normal force
connection and is available with gold, tin or selective gold
plating. All are available with standard or Hi-Temp thermoplastic
insulators. Our SMT offering is available with optional pick and
place pads and tape & reel packaging.
Features:
Broad range of sizes and profiles
Contact systems with high normal force
Choice of contact plating
SMT pick & place option
Optional Tape & reel packaging
Mating Connectors:
Adam Tech HPH headers and all industry standard .050" pitch
pin headers with .016" [0.4mm] square pins
Specifications:
Material:
Insulator: Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Phosphor Bronze
Contact Plating:
G = Gold over nickel underplate overall
SG = Gold over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
ORDERING INFORMATION
HRS
1A
SERIES
INDICATOR
HRS = .050"
Receptacle Strip
NO. OF ROWS / PROFILE
1A=Single Row, Standard Profile
1B=Single Row, Low Profile
1C=Single Row, .085" Height
2A=Dual Row, Standard
Profile .050"x.100"
2B=Dual Row, Low Profile
.050"x.100"
2C=Dual Row, Low Profile
.050"x.050"(SMT) or PCB
Mechanical:
Insertion force: 0.375 lbs per contact max.
Withdrawal force: 0.125 lbs per contact min.
2F=Dual Row, Low Profile
Temperature rating:
Operating temperature: -40°C to +105°C
Packaging:
Anti-ESD trays or tubes
(Tape and Reel optional for SMT option)
Safety Agency Approvals:
UL Recognized & CSA Certified, File no. E224053
50
.050"x.100"(SMT)
1F =Single Row (SMT)
.228" Height
1G=Single Row, .079" Height,
Top Entry, (SMT)
2e=Dual Row, .134" Height
.050"x.050" (SMT or PCB)
2F=Dual Row, .230" Height
.050"x.100"
2G=Dual Row, .085" Height
.050"x.050" (SMT)
G
A
SOLDER
TAIL LENGTH
A=S
tandard
solder tail for
.062"-.125"
PCB thickness
SMT=S
urface mount
leads (2C, 2E,
2F, 2G only)
SMT-A =Surface mount
leads Type A
(1F, 1G only)
SMT-B = S
urface mount
leadsType B
(1F, 1G only)
CONTACT
PLATING
G=Gold plated
T =Tin plated
SG=Gold plated contact area,
tin plated solder tails
NO. OF POSITIONS
Single Row: 02 thru 40
Dual Row: 04 thru 80
OPTIONS:
Add designator(s) to end of part number
30=30 µin gold plating in contact area
P = Guide Pegs
E = End Pegs
HT = Hi-Temp insulator for Hi-Temp soldering processes
up to 260°C (Add this option for thru-hole products only.
All SMT products are manufactured with Hi-Temp insulators)
294
www.adam-tech.com
.050" RECEPTACLE STRIPS
.079", .085", .181" & .335" Height
HRS SERIES
B
HRS-1B
HRS-2B
.050
[1.27]
B
.050
[1.27]
HRS-1B-12-GA
A
HRS-2B-24-GA
.197
[5.00]
A
.102 [2.60]
.181
[4.60]
.181
[4.60]
.118 [3.00]
.118 [3.00]
.050
[1.27]
.050
[1.27]
ø.018
[0.46]
ø.018
[0.46]
.100
[2.54]
HRS-2A
HRS-1A
B
.050 [1.27]
B
.050 [1.27]
.100
[2.54]
HRS-1A-12-GA
.098
[2.50]
A
.197
[5.00]
A
.335
[8.50]
.335
[8.50]
.106
[2.70]
.050
[1.27]
PIN 1
HRS-2A-24-GA
.106
[2.70]
.050
[1.27]
.015x.015
[0.38x0.38]
.015x.015
[0.38x0.38]
.100
[2.54]
HRS-1G-SMT
HRS-2G-SMT
top entry
TOP Entry
B
A
TYPE B
.050
[1.27]
HRS-1G-10-SG-SMT-B
B
.050
[1.27]
PIN 1
HRS-2G-20-SG-SMT-P
B
.120
[3.05]
TYPE A
.071
[1.80]
A
.079 [2.00]
.050
[1.27]
B-.050 [1.27]
.161
[4.10]
www.adam-tech.com
.085
[2.15]
.165
[4.18]
295
.050" RECEPTACLE STRIPS
.134" & .228" HEIGHT .050" [1.27] CENTERLINE
HRS SERIES
HRS-2E SMT
HRS-2E SMT
Ordering Information pg. 276
w/ optional Peg
B
B
HRS-2E-20-SG-SMT-E
.050 [1.27]
HRS-2E-20-SG-SMT
Shown with -E end
peg option
.050 [1.27]
.050 [1.27]
.050 [1.27]
.016 x .005 [0.40 x 0.12]
.016 x .005 [0.40 x 0.12]
.120
[3.05]
A
.120
[3.05]
A
.134
[3.40]
.134
[3.40]
.173
[4.40]
.039 [1.0]
.164
[4.18]
A + .052 [1.32]
PEGS
OPTIONAL
PEGS
OPTIONAL
B
ø.037
[0.95]
ø.051 [1.30]
.050 [1.27]
.083
[2.10]
.205
[5.20]
A + .052 [1.32]
RECOMENDED PCB LAYOUT
.164
[4.18]
B - .050 [1.27]
ø.027
[0.70]
B
.050 [1.27]
.083
[2.10]
.024x.061
[0.60x1.55]
.205
[5.20]
B - .050 [1.27]
RECOMENDED PCB LAYOUT
Recommended PCB Layout
.024x.061
[0.60x1.55]
Recommended PCB Layout
A = .050 [1.27] X No. of Positions per row + .018 [0.46]
B = .050 [1.27] X No. of Spaces
A = .050 [1.27] X No. of Positions per row + .018 [0.46]
B = .050 [1.27] X No. of Spaces
HRS-1F-SMT
HRS-2F-SMT
TYPE B
B
B
.050 [1.27]
.017 x .008
[0.42 x 0.20]
HRS-1F-12-SG-SMT-B
TYPE A
.100
[2.54]
.050 [1.27]
.098
[2.50]
A
HRS-2F-24-SG-SMT
.201
[5.10]
A
.228
[5.80]
.228
[5.80]
.017 x .008 [0.42 x 0.20]
A = .050 [1.27] X No. of Positions + .008 [0.20]
B = .050 [1.27] X No. of Spaces
296
.146
[3.70]
B - .050 [1.27]
PEGS
OPTIONAL
.248
[6.30]
A = .050 [1.27] X No. of Positions per row + .008 [0.20]
B = .050 [1.27] X No. of Spaces
www.adam-tech.com
­.050" RECEPTACLE STRIPS
.085" & .133" Height .050" [1.27] CENTERLINE
HRS SERIES
HRS-1C
HRS-2C
Single Row
Dual Row
Ordering Information
pg. 294
.050
[1.27]
B
.050 [1.27]
HRS-1C-13-GA
B
.050 [1.27]
HRS-2C-26-GA
A = .050 [1.27] X No. of Pos. + .018 [0.46]
B = .050 [1.27] X No. of Spaces
A = .050 [1.27] X No. of Pos.
+ .018 [0.46]
B = .050 [1.27] X No. of Spaces
.071
[1.80]
A
.120
[3.05]
A
.085
[2.15]
.085
[2.15]
.061 [1.55]
.061 [1.55]
.050
[1.27]
.0165 x .004 [0.40 x 0.10]
.0165 x .004 [0.40 x 0.10]
HRS-2C-SMT
HRS-2C-SMT
Dual row with end pegs
Dual Row With underside pegs
B
.050 [1.27]
B
.050 [1.27]
HRS-2C-20-SG-SMT-E
HRS-2C-20-SG-SMT
.050 [1.27]
.050 [1.27]
.120
[3.05]
A
.090
[2.30]
A + .052 [1.32]
PEGS
OPTIONAL
A = .050 [1.27] X No. of Pos. + .018 [0.46]
B = .050 [1.27] X No. of Spaces
.120
[3.05]
A
.085
[2.15]
.085
[2.15]
.039 [1.0]
.164
[4.18]
B – .050 [1.27]
A = .050 [1.27] X No. of Pos. + .018 [0.46]
B = .050 [1.27] X No. of Spaces
HRS-2E
.164
[4.18]
B
HRS-1C
PCB Layout
Dual Row
Pegs
Optional
.050 [1.27]
ø.024
[0.60]
B
.050 [1.27]
HRS-2E-20-GA
.050 [1.27]
.050 [1.27]
ø.027 [0.70]
ø.037
[0.95]
.133
[3.40]
.094 [2.40]
A = .050 [1.27] X No. of Pos. + .018 [0.46]
B = .050 [1.27] X No. of Spaces
ø.024
[0.60]
.050 [1.27]
.120
[3.05]
A
.0165 x .004 [0.40 x 0.12]
B
HRS-2C & 2E
PCB Layout
B
.050 [1.27]
.083
[2.10]
.185
[4.70]
.050
[1.27]
B - .050 [1.27]
BOTTOM PEG OPTION
HRS-2C SMT
PCB Layout
www.adam-tech.com
ø.051 [1.30]
.020 x .051
[0.50 x 1.30]
A + .052 [1.32]
END PEG OPTION
297
2.00mm PIN HEADERS
.079" [2.00] CENTERLINE
2PH SERIES
Introduction
Adam Tech 2PH & D2PH Series 2.0mm Pin Headers offer a full
range of fine pitched headers in a variety of configurations including
Single, Dual and Three rows, Straight & Right Angle in Thru-Hole or
SMT mounting. Their close tolerance .020" sq. posts are smoothly
finished and taper tipped to eliminate insertion damage to the PCB
or mating connector. Adam Tech 2.0mm Pin Headers can be easily
cut into exact sizes as required. Options include stacked insulator
versions and choice of tin, gold or selective gold plating. This
series is compatible with all industry standard 2.0mm pitch mating
connectors.
Features:
Single, Dual or Three Row
Tin, gold or selective gold plating options
Thru-hole or SMT mounting
Stacked and Custom length versions available
Versatile Breakaway design
Hi Temp Insulator available
ORDERING INFORMATION
2PH2 = 2.00mm Dual
Row Straight
Pin Header
PLATING
U = Gold plated
T = Tin plated
SG = Selective gold
plating in contact
area, tin plating on solder tails
POSITIONS
Single row: 1 thru 40
Dual row: 2 thru 80
2PH2R = 2.00mm Dual
Row Right
Angle
Pin Header
Material:
Standard insulator: PBT, glass reinforced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Brass
Plating:
U = Gold over nickel underplate overall
SG = Gold over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
ORDERING INFORMATION
DUAL INSULATOR HEADERS
D2PH
1
40
NO. OF ROWS
1 = Single row
2 = Dual row
SERIES
INDICATOR
D2PH= 2mm Dual
Insulator
Pin Header
SG
.xxx"/.xxx"/.xxx
“C" DIM.
“D" DIM.
“E" DIM.
PLATING
U = Gold plated
T = Tin plated
SG =Gold plating in contact area
tin plating on
solder tails
STACKING DIMENSIONS
Specified In Inches As:
“C” Dim. / “D” Dim. / “E” Dim.
Replace “D” Dim. with “SMT” for
Surface Mount Option
POSITIONS
Single row: 2 thru 40
Dual row: 4 thru 80
Packaging:
Anti-ESD plastic bags
(Tape and Reel available for SMT option)
Approvals and Certifications:
UL Recognized & CSA Certified,
File no. E224053
A
PIN LENGTH
A=Standard
length
B=Special
length,
customer
specified
defined as:
tail dim/total
length
SERIES INDICATOR
2PH1 = 2.00mm Single
Row Straight
Pin Header
Specifications:
Temperature Rating:
Operating temperature: -40°C to +105°C
Soldering process temperature: 260°C
U
2PH1R= 2.00mm Single
Row Right
Angle Pin
Header
Mating Receptacles:
Mates with all industry standard .050" pitch female headers
Mechanical:
Mating durability: 1,000 cycles
40
2PH1
OPTIONS: Add designator(s) to end of part number
SMT= Surface Mount leads Dual Row
SMT-A= Surface Mount leads Type A
SMT-B= Surface Mount Leads Type B
HT=Hi-Temp insulator for Hi-Temp soldering processes up to
260°C
(Add this option for thru-hole products only. All SMT products are
manufactured with Hi-Temp insulators)
L = Low profile 1.5mm insulator thickness
P = Locating pegs
BR= Board retention solder tails
298
www.adam-tech.com
2.00mm PIN HEADERS
.079" [2.00] CENTERLINE
2PH SERIES
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
2PH1
.079 [2.00]
A
PIN 1
2ph1-16-ua
B
.079
[2.00]
.154 [3.90]
Ø .031 [0.80]
B
.110 [2.80]
.079
[2.00]
.079 [2.00]
.020 [0.51]
Recommended PCB Layout
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
2PH1R
A
.079 [2.00]
2ph1R-16-ua
PIN 1
B
ø.031 [0.80]
.154 [3.90]
.118
[3.00]
.079 [2.00]
.110 [2.80]
.079
[2.00]
B
.079 [2.00]
Recommended PCB Layout
.020 [0.51]
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
2PH2
.157 [4.00]
PIN 2
A
PIN 1
2ph2-32-ua
.079
[2.00]
B
.154
[3.90]
ø.031 [0.80]
B
.079 [2.00]
.079 [2.00]
.110 [2.80]
.079 [2.00]
.079
[2.00]
.020 [0.51] .sq
Recommended PCB Layout
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
A
PIN 2
2PH2R
.157 [4.00]
PIN 1
2ph2R-32-ua
.079
[2.00]
B
B
.154 [3.90]
.079 [2.00]
.079
[2.00]
.079 [2.00]
.118 [3.00]
.020 [0.51] .sq
ø.031 [0.80]
.110 [2.80]
.079 [2.00]
Recommended PCB Layout
www.adam-tech.com
299
2.00mm PIN HEADERS
.079" [2.00] CENTERLINE
2PH SERIES
2PH1-SMT PIN 1
2PH1 (SMT)
A = .079" [2.00] x No. of positions
.079 [2.00]
TYPE B
B = .079" [2.00] x No. of spaces
2ph1-15-ua-SMT
PIN 1
.079 [2.00]
TYPE A
Recommended PCB Layout
A
B
.079
[2.00]
.059
[1.50]
.157
[4.00]
.086 [2.20]
.165
[4.20]
.020
[0.50] Sq.
.079 [2.00]
2PH2-SMT
B
.079 [2.00]
.033
[0.85]
B
.033
[0.85]
.185
[4.70]
.185
[4.70]
.092 [2.35]
SMT-A
SMT-B
2PH2 (SMT)
A = .079" [2.00] x No. of positions
PIN 2
B = .079" [2.00] x No. of spaces
.157 [4.00]
PIN 1
2ph-26-ua-SMT
.079
[2.00]
A
B
Recommended PCB Layout
.059
[1.50]
B
.079 [2.00]
.157
[4.00]
.033 [0.85]
.086 [2.20]
.079 [2.00]
.244
[6.20]
.020
[0.50] Sq.
.264
[6.70]
.102 [2.60]
D2PH-1
A
D2PH-1
A = .079" [2.00] x No. of positions
.079 [2.00]
B = .079" [2.00] x No. of spaces
PIN 1
B
D2ph1-16-UA-.235 /.100 /.400
C
Recommended PCB Layout
.079 [2.00]
ø .031 [0.80]
E
B
.079 [2.00]
D
.079 [2.00]
.020 [0.50] Sq.
.079 [2.00]
A
D2ph-2
A = .079" [2.00] x No. of positions
B= ..079" [2.00] x No. of spaces
PIN 2
.157 [4.00]
PIN 1
.079 [2.00]
B
D2ph2-32-UA-.235 /.100 /.400
C
Recommended PCB Layout
.079 [2.00]
ø.031 [0.80]
E
B
.079 [2.00]
.079 [2.00]
D
.079 [2.00]
300
.079 [2.00]
.020 [0.50] Sq.
www.adam-tech.com
2.00mm HEADERS & Shunts
.079" [2.00] CENTERLINE
2PH SERIES
D2PH-1 (SMT)
PIN 1
D2PH-1-SMT
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
.079 [2.00]
TYPE B
PIN 1
.079 [2.00]
TYPE A
D2PH-1-12-U-.100/SMT/.240
A
B
Recommended PCB Layouts
C
B
.079 [2.00]
.033
[0.85]
.079 [2.00]
E
.079 [2.00]
.165
[4.20]
.020
[0.50] Sq.
.079 [2.00]
D2PH-2-SMT
PIN 2
.157 [4.00]
.092
[2.35]
.185
[4.70]
.129 [3.27]
B
.079 [2.00]
.033
[0.85]
TYPE A
TYPE B
SMT-A
.092
[2.35]
SMT-B
RECOMENDED PCB LAYOUT
D2PH-2 (SMT)
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
PIN 1
A
B
.079
[2.00]
D2PH-2-16-u-.145/SMT/.360
Recommended PCB Layouts
C
B
.079 [2.00]
.079 [2.00]
.033 [0.85]
E
.079 [2.00]
.129 [3.27]
.079 [2.00]
MS2A
MS2A
MS2B
MS2B
.079
[2.00]
Rigid
short
handle
.078 [2.00]
.197
[5.00]
MS2H-2
MS2H-2
.157
[4.00]
FLEXIBLE
LONG
handle
.374
[9.50]
.157 [4.00]
.441
[11.20]
.177
[4.50]
.078
[2.00]
.078 [2.00]
.157
[4.00]
.138
[3.50]
.177
[4.50]
MS2H-1
.102 [2.60]
MS2C
.079
[2.00]
.157
[4.00]
.078 [2.00]
.157
[4.00]
.264
[6.70]
.244
[6.20]
.020
[0.50] Sq.
.177
[4.50]
.079 [2.00]
www.adam-tech.com
.078
[2.00]
.079 [2.00]
301
2.00mm BOX HEADERS
.079" [2.00] CENTERLINE
2BHR SERIES
Introduction:
Adam Tech 2BHR Series 2.0mm Box Headers are dual row shrouded
headers for use with dual row IDC female socket connectors. Our
low profile, space saving design has a center slot for the socket’s
polarization bump. Adam Tech’s Box Headers are available in
Straight PCB Mount, Right Angle PCB Mount and SMT Mounting.
Plating options include choice of Gold, Tin or Selective Gold. SMT
versions are manufactured with a Hi-Temp insulator. Additional
options include latches and custom pin lengths.
Features:
Shrouded, insulated connection
Superior low profile design
Slot for IDC socket Polarization bump
Straight PCB, Right Angle PCB and SMT versions
Gold, Tin or Selective Gold plating
Options include Elevated types and integral latches
Hi-Temp insulator available
Mating Sockets:
Adam Tech .079" [2.0mm] X .079" [2.0mm] dual row IDC sockets
ORDERING INFORMATION
2BHR
Specifications:
Material:
Standard insulator: PBT, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Brass
Plating:
U = Gold over nickel underplate
SG = Gold over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall­­­­­
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
20
V
U
SERIES
INDICATOR
2BHR=
2mm Box Header
NO. OF POSITIONS
08, 10, 14, 16, 20,
24, 26, 30, 34, 40,
44, 50, 60, 64
A
PIN LENGTH
A
=Standard
solder tail
B =Special length,
customer
specified
SMT =Surface
Mount
CONTACT PLATING
U=Gold Plated
T =Tin Plated
SG=Gold Plating in contact
area, tin plated tails
Mechanical:
Mating durability: 500 cycles min.
Temperature Rating:
Operating temperature: -40°C to +105°C
Soldering process temperature:
Standard insulator: 235°C
Hi-Temp insulator: 260°C
Packaging:
Anti-ESD plastic trays
APPROVALS AND CERTIFICATIONS:
UL Recognized & CSA Certified,
File no. E224053
MOUNTING ORIENTATION
V =Straight Mount
H =Right Angle Mount
This series is available in an
elevated version similar to
our BHRE Series as shown
on pgs. 322-323
OPTIONS:
Add designator(s) to end of part number
30 =30 µin gold plating in contact area
GY = Gray color insulator
HT =Hi-Temp insulator for Hi-Temp soldering processes up
to 260°C (Add this option for thru-hole products only. All SMT
products are manufactured with Hi-Temp insulators)
302
www.adam-tech.com
2.00mm BOX HEADERS
.079" [2.00] CENTERLINE
2BHR SERIES
2BHR
Straight
A
B
.173 [4.40]
.020 [0.50] SQ.
2BHR-14-VUA
.216
[5.50]
.157 [4.00]
B
.079 [2.00]
.220
[5.60]
.110 [2.80]
.079 [2.00]
ø.031 [0.80]
.079 [2.00]
Recommended
PCB Layout
.079 [2.00]
A = .079 [2.00] X No. of Spaces + .362 [9.20]
B = .079 [2.00] X No. of Spaces
2BHR
Right Angle
A
B
.173 [4.40]
.020
[0.50] SQ.
.216
[5.50]
.157 [4.00]
2BHR-14-HUA
B
.039
[1.00]
.220
[5.60]
.079 [2.00]
.079 [2.00]
.079 [2.00]
.079 [2.00]
ø.031 [0.80]
.114 [2.90]
Recommended
PCB Layout
A = .079 [2.00] X No. of Spaces + .362 [9.20]
B = .079 [2.00] X No. of Spaces
2BHR
SMT
A
B
.173 [4.40]
2BHR-14-VUA-SMT
.020 [0.50] SQ.
.157 [4.00]
B
.216
[5.50]
.079 [2.00]
.059 [1.50]
.220
[5.60]
.238 [6.05]
.079 [2.00]
.256
[6.50]
.295
[7.50]
.039 [1.00]
Recommended
PCB Layout
A = .079 [2.00] X No. of Spaces + .362 [9.20]
B = .079 [2.00] X No. of Spaces
www.adam-tech.com
303
2.00mm latch HEADER
.079" [2.00] CENTERLINE
2MHR SERIES
Introduction:
Adam Tech 2MHR Series 2mm Latch Headers are dual row, PCB
mounted, shrouded headers with latches for use with dual row
IDC female socket connectors. In addition to providing a shock
and vibration proof connection the locking latches also act as
ejectors to remove the mating socket. Our low profile, space
saving design has a center slot for the socket’s polarization
bump. Adam Tech’s Latch Headers are available in Straight PCB
Mount, Right Angle PCB and SMT Mounting. Plating options
include choice of Gold, Tin or Selective Gold
Features:
Integral Latches provide Shock and Vibration Proof connection
Slot for IDC socket Polarization bump
Straight PCB, Right Angle PCB and SMT versions
Gold, Tin or Selective Gold plating
Elevated option available
Hi-Temp insulator available
Mating Sockets:
2mm X 2mm Dual row IDC sockets
Specifications:
Material:
Insulator: PBT, glass reinforeced, rated UL94V-0
Insulator Color: Black (Gray optional)
Contacts: Brass
ORDERING INFORMATION
Plating:
U = Gold over nickel underplate overall
SG = Gold over nickel on contact area,
Tin over copper underplate on tails.
T = Tin over copper underplate overall
2MHR
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Mating durability: 500 Cycles min.
44
V
SERIES
INDICATOR
2MHR =
2mm Shrouded
Header w/Latches
POSITIONS
10, 12, 14, 16, 20, 22,
24, 26, 30, 32, 34, 40,
44, 48, 50, 60, 64, 68
Temperature Rating:
Operating temperature: -40°C to +105°C
U
A
L
LATCHING
FEATURES
S =Short latches
(for sockets
w/o strain
relief)
L =Long latches
(for sockets
w/strain relief)
N=No latches
PIN LENGTHS
A=Standard length
Packaging:
Anti-ESD plastic trays
Safety Agency Approvals:
UL Recognized & CSA Certified, File no. E224053
MOUNTING ANGLE
V =Straight Mount
H=Right Angle Mount
This series is availabe in an
elevated version similar to
our BHRE Series as shown
on pgs. 322-323
solder tail
B=Special length,
customer specified
CONTACT PLATING
U=Gold plated
SG=Gold plating in
contact area, Tin
plated solder tails
T =Tin plated
OPTIONS:
Add designator(s) to end of part number
HT = High-temp insulator for high-temp soldering processes
304
www.adam-tech.com
2.00mm latch HEADER
.079" [2.00] CENTERLINE
2MHR SERIES
2MHR
.079
[2.00]
STRAIGHT PCB MOUNT
.236
[6.00]
.160[4.06]
Y
X
[.394
[10.00]
.118
[3.00]
.079 [2.00]
.079
[2.00]
B
A
B
.079 [2.00]
LATCH DIMENSIONS
X
2MHR-34-VUAS
Ø.031
[0.80]
Y
LONG LATCH
.775 [19.70]
.452 [11.50]
SHORT LATCH
.665 [16.90]
.342 [8.70]
A = .079 [2.00] X No. of Spaces + .697 [17.70]
B = .079 [2.00] X No. of Spaces
Recommended PCB Layout
B
.079
[2.00]
.079
[2.00]
2MHR
Right angle PCB MOUNT
.079
[2.00]
.236
[6.00]
.160 [4.06]
Y X
[.394
[10.00]
.079
[2.00]
2MHR-60-HUAS
.118
[3.00]
A
B
.079 [2.00]
.079
[2.00]
LATCH DIMENSIONS
X
Y
LONG LATCH
.775 [19.70]
.452 [11.50]
SHORT LATCH
.665 [16.90]
.342 [8.70]
A = .079 [2.00] X No. of Spaces + .697 [17.70]
B = .079 [2.00] X No. of Spaces
Ø.031
[0.80]
Recommended PCB Layout
.079
[2.00]
2MHR
.079
[2.00]
VERTICAL SMT MOUNT
.236
[6.00]
.160[4.06]
Y X
[.394
[10.00]
2MHR-40-HUAS
B
A
LATCH DIMENSIONS
X
B
.079 .047
[2.00] [1.20]
.299
[7.60]
.157
[4.00]
Y
LONG LATCH
.775 [19.70]
.452 [11.50]
SHORT LATCH
.665 [16.90]
.342 [8.70]
A = .079 [2.00] X No. of Spaces + .697 [17.70]
B = .079 [2.00] X No. of Spaces
www.adam-tech.com
.394
[10.00]
Recommended PCB Layout
305
2.00mm RECEPTACLE STRIPS
.079" [2.00] CENTERLINE
2RS SERIES
Introduction:
Adam Tech 2RS Series 2.00mm Receptacle Strips are offered in
several sizes and profiles designed to satisfy most 2.00mm socket
requirements. Available in Single and Dual rows, they are offered
in Straight, Right Angle, SMT, Bottom Entry and Pass Through
PCB mounting styles. Each type has a specially designed contact
system which uses a wiping mating action and produces a high
normal force connection with gold, tin or selective gold plating. All
are available with Standard or Hi-Temp Thermoplastic insulators.
Our SMT offering is available with optional pick and place pads and
tape & reel packaging.
Features:
Single and dual row in straight, right angle and SMT mounting forms
Top, side and bottom entry versions
Plated full gold, full tin or duplex plated
Five different body heights
Standard PBT insulator or optional Hi Temp insulator
Tape and reel packaging available
ORDERING INFORMATION
2RS1
Mating Connectors:
Adam Tech 2PH headers and all industry standard 2.0mm pin
headers with a .020" [0.5mm] square pin.
Specifications:
Material:
Insulator: PBT, glass reinforeced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Phosphor Bronze
Contact Plating:
G = Gold over nickel underplate overall
SG = Gold over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.313 lbs per contact max.
Withdrawal force: 0.175 lbs per contact min.
Temperature Rating:
Operating temperature: -40°C to +105°C
Packaging:
Anti-ESD plastic trays
(Tape and Reel optional for SMT option)
Safety Agency Approvals:
UL Recognized & CSA Certified,
File no. E224053
40
G
SERIES INDICATOR
PLATING
2RS1= 2.00mm Single Row,
G=Gold plated
Vertical Mount,
SG =Gold plated
Receptacle
contact area,
2RS2=2.00mm Dual Row,
tin plated
Vertical Mount,
solder tails
Receptacle
T=Tin plated
2RS1R= 2.00mm Single Row,
Right Angle,
Receptacle
POSITIONS
2RS2R= 2.00mm Dual Row,
Single Row:2 thru 40
Right Angle,
Dual Row: 4 thru 80
Receptacle
Four Row: 8 thru 120
2RS4= 2.00mm 4 Row,
Vertical Mount,
Receptacle
2RS2BR = 2.00mm Dual Row, Right Angle, 3-Sided
Contact Receptacle
2rs1h= 2.00mm Single Row, Vertical Mount,
.248" Height Receptacle
2rs2h
= 2.00mm Dual Row, Vertical Mount,
.248" Height Receptacle
2rs2t= 2.00 mm Dual Row, Surface Mount,
.106" Height, Top Entry Receptacle
2rs2b= 2.00mm Dual Row, Surface Mount,
.106" Height, Bottom Entry Receptacle
OPTIONS:
Add designator(s) to end of part number
30 = 30 µin gold plating in contact area
SMT=SMT leads with Hi-Temp insulator dual row
SMT-A=SMT Single Row Type A with Hi-Temp insulator
SMT-B =SMT Single Row Type B with Hi-Temp insulator
P=Optional guide peg on SMT version
PP=Pick and place pad
HT=Hi-Temp insulator for Hi-Temp soldering processes
up to 260°C (Add this option for thru-hole products only.
All SMT products are manufactured with Hi-Temp insulators)
306
www.adam-tech.com
2.00mm RECEPTACLE STRIPS
.169" & .193" Height .079" [2.00] CENTERLINE
2RS SERIES
2RS1
B
.094
[2.40]
A
2RS1-15-G
.169
[4.30]
.094 [2.40]
B
.079
[2.00]
.079 [2.00]
.020X.008
[0.50X0.20]
ø.028 [0.70]
A = .079 [2.00] X No. of Positions
B = .079 [2.00] X No. of Spaces
Recommended PCB Layout
2RS2
B
.079
[2.00]
.165
[4.20]
A
2RS2-32-G
.169
[4.30]
.094
[2.40]
.05x.008
[0.50x0.20]
.079
[2.00]
B
.079 [2.00]
.079
[2.00]
.079 [2.00]
A = .079 [2.00] X No. of Positions per row
B = .079 [2.00] X No. of Spaces
ø.028 [.70]
Recommended PCB Layout
2RS2BR
A
B
.079 [2.00]
.197 [5.00]
.063
[1.60]
.193
[4.90]
2RS2BR-28-G
.094
[2.40]
.024 X .006
[0.60 X 0.15]
.079
[2.00]
B
.183
[4.65]
.079 [2.00]
.183
[4.65]
A = .079 [2.00] X No. of Positions per row + .008 [0.20]
B = .079 [2.00] X No. of Spaces
ø.030
[0.79]
Recommended PCB Layout
www.adam-tech.com
307
2.00mm RECEPTACLE STRIPS
.110", .169" & .191" Height .079" [2.00] CENTERLINE
2RS SERIES
B
.169 [4.30]
2RS1R
.110 [2.80]
.122 [3.10]
.079
[2.00]
2RS1R-14-G
.161
[4.10]
.02x.008
[0.50x0.20]
2RS1R
B
A
.079 [2.00]
.169 [4.30]
ø.028 [0.70]
A = .079 [2.00] X No. of Positions
B = .079 [2.00] x No of Spaces
Recommended PCB Layout
B
2RS2R
.191
[4.85]
.079 [2.00]
.118
[3.00]
.079
[2.00]
2RS2R-32-G
2RS2R
.193
[4.90]
.02x.008 [0.50x0.20]
B
.079 [2.00]
.079
[2.00]
.079
[2.00]
.283 [7.20]
ø.028 [0.70]
A = .079 [2.00] X No. of Positions Per Row
B = .079 [2.00] x No of Spaces
Recommended PCB Layout
B
2RS1-SMT
A = .079 [2.00] X No. of Positions
B = .079 [2.00] x No of Spaces
TYPE A
.079 [2.00]
2RS1-15-SG-SMT-A
2RS1-SMT
A
.079
[2.00]
.177
[4.50]
.169
[4.30]
B
.079 [2.00]
.200
[5.08]
.142
[3.60]
.020x.008 [0.50x0.20]
.035x.090
[0.89x2.29]
Recommended PCB Layout
B
2RS2-SMT
A = .079 [2.00] X No. of Positions Per Row
B = .079 [2.00] x No of Spaces
.079 [2.00]
.079
[2.00]
.165
[4.20]
A
.079 [2.00]
.169
[4.30]
.035
[.90]
308
B
.079 [2.00]
.177
[4.50]
.297
[7.55]
Optional
Guide Peg
.236
[6.00]
www.adam-tech.com
.035x.098
[0.89x2.50]
.100 [2.55]
ø.039 [1.00]
.02x.008 [0.50x0.20]
B-.079 [2.00]
2RS2-32-SG-SMT
2RS2-SMT
B-.079 [2.00]
ø.047
[1.20]
Recommended PCB Layout
2.00mm RECEPTACLE STRIPS
.106" & .248" Height .079" [2.00] CENTERLINE
2RS SERIES
A = .079 [2.00] X No. of Positions
B = .079 [2.00] x No of Spaces
B
2RS1h
.079
[2.00]
A
2RS1H-16-G
.248
[6.30]
B
.079 [2.00]
.094 [2.40]
.079 [2.00]
.020 x.016
[0.50x0.40]
ø.031 [0.80]
Recommended PCB Layout
A = .079 [2.00] X No. of Positions Per Row
B = .079 [2.00] x No of Spaces
B
2RS2h
.157
[4.00]
A
2RS2H-32-G
B
.248
[6.30]
.079 [2.00]
.094 [2.40]
.079 [2.00]
.079 [2.00]
ø.031 [0.80]
.020 x.016
[0.50x0.40]
Recommended PCB Layout
A = .079 [2.00] X No. of Positions Per Row
B = .079 [2.00] x No of Spaces
B
2RS2t-SMT
top entry socket
.079 [2.00]
2RS2T-20-SG-SMT
.079
[2.00]
.165
[4.20]
A
.106 [2.70]
.039
[1.00]
.110 [2.80]
.02x.006 [0.50x0.15]
B - .079 [2.00]
B
.079 [2.00]
.268
[6.80]
ø.039 [1.00]
Optional
Guide Peg
ø.047
[1.20]
Recommended PCB Layout
A = .079 [2.00] X No. of Positions Per Row
B = .079 [2.00] x No of Spaces
B
.138 [3.50]
B-.079 [2.00]
.228 [5.80]
.035x.065
[0.89x1.65]
2RS2B-SMT
Bottom entry socket
.079 [2.00]
2RS2B-20-SG-SMT
2RS2-SMT (2.7MM HIGH)
.079
[2.00]
.106 [2.70]
.039
[1.00]
.268
[6.80]
.110 [2.80]
ø.039 [1.00]
.02x.006 [0.50x0.15]
B - .079 [2.00]
B
.079 [2.00]
.165
[4.20]
A
Optional
Guide Peg
.228 [5.80]
.035x.065
[0.89x1.65]
.079 [2.00]
B - .079 [2.00]
ø.047
[1.20]
Recommended PCB Layout
www.adam-tech.com
309
2.00mm RECEPTACLE STRIPS
PC104 PCI socket
2RS SERIES
.079
[2.00]
2.362 [60.00]
.079
[2.00]
1.889 [48.00]
2RS-30-g-pci-e
.366
[9.30]
.476
[12.10]
.079 [2.00]
.079
[2.00]
.079 [2.00]
2.362 [60.00]
.157
[4.00]
1.889 [48.00]
.366
[9.30]
2RS-60-g-pci-e
.476
[12.10]
.079 [2.00]
.334
[8.50]
.078 [2.00]
.078 [2.00[
.315
[8.00]
2.378 [60.40]
.368
[9.35]
2RS-120-g-pci-e-pf
.476
[12.10]
2.283 [58.00]
.079
[2.00]
2.283 [58.00]
.236
[6.00]
Ø.039 [1.00]
Recommended PCB Layout
310
www.adam-tech.com
Recommended PCB Layout
.079
[2.00]
2.00mm RECEPTACLE STRIPS
PC104 PCI socket
2RS SERIES
.078 [2.00]
.078 [2.00]
.315
[8.00]
2.378 [60.40]
2RS-120-g-pci-1
.110
[2.80]
.368
[9.35]
.236
[6.0]
2.283 [58.00]
.315
[8.00]
2.378 [60.40]
.110
.472 [2.80]
[12.00
.110
[2.80]
.368
[9.35]
2RS-120-g-pci-2
2.283 [58.00]
.236
[6.0]
.315
[8.00]
2.378 [60.40]
.197
[5.00]
.368
[9.35]
.565
[14.35]
.110
[2.80]
2RS-120-g-pci-3
2.283 [58.00]
.236
[6.0]
.315
[8.00]
2.378 [60.40]
.368
[9.35]
.732
[18.60]
.110
[2.80]
.364
[9.25]
2RS-120-g-pci-4
2.283 [58.00]
.236
[6.0]
.079
[2.00]
2.283 [58.00]
.079
[2.00]
.236
[6.00]
Ø.039 [1.00]
Recommended PCB Layout
www.adam-tech.com
311
.100" PIN HEADERS
.100" [2.54] CENTERLINE
PH SERIES
Introduction:
Adam Tech PH Series .100" Pin Headers are a full range headers in
a variety of configurations including Single, Dual and Three rows,
Straight or Right Angle in Thru-Hole or SMT mounting. Their close
tolerance .025" sq. posts are smoothly finished and taper tipped to
eliminate insertion damage to the PCB or mating connector. Adam
Tech Pin Headers can be easily cut into exact sizes as required.
Options include stacked insulator versions and choice of tin, gold
or selective gold plating. This series is compatible with all industry
standard .100" pitch pin headers.
Features:
Single, Dual or Three Row
Tin, gold or selective gold plating options
Thru-hole or SMT mounting
Stacked and Custom length versions available
Versatile Breakaway design
Hi Temp Insulator available
Mating Receptacles:
Mates with all industry standard receptacles accepting a .025"
square post on .100" [2.54mm] centerlines
Specifications:
ORDERING INFORMATION
Material:
Insulator: PBT, glass reinforeced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Brass
Plating:
U = Gold over nickel underplate
SG = Gold over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 3 Amps max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 2 oz lbs max.
Withdrawal force: .75 oz lbs min
Mating durability: 1000 cycles min.
PH1
SERIES INDICATOR
PH1=Single Row, Straight
PH1RA =Single Row,
Right Angle,
High Profile
PH1RB= Single Row,
Right Angle,
low profile
PH2 =Dual Row,
Straight
PH2RA =Dual Row,
Right Angle
PH3 =Three Row,
Straight
PH3RA =Three Row,
Right Angle
Temperature Rating:
Operating temperature: -40°C to +105°C
Soldering process temperature:
Standard insulator: 235°C
Hi-Temp insulator: 260°C
Packaging:
Anti-ESD plastic bags
Safety Agency Approvals:
UL Recognized & CSA Certified, File no. E224053
40
POSITIONS
PH1: 1 thru 40
PH2: 2 thru 80
PH3: 3 thru 120
U
A
MATING/TAIL
LENGTH
A =Mating Length
(“C” dim.) = .235"
Solder Tail
(“D” dim.) = .120"
B =Mating Length
(“C” dim.) = .318"
Solder Tail Length
(“D” dim.) = .120"
Special lengths
available contact
factory
PLATING
U= Gold flash overall
V= 15 µin gold on mating
area 100 µin tin on
solder tail
W= 30 µin gold on mating
area 100 µin tin on
solder tail
T= 100 µin tin overall
SG= Gold flash on
mating area 100 µin
tin lead on solder tail
OPTIONS:
Add designator(s) to end of part number
SMT=Surface mount leads Dual row with Hi-Temp insulator
SMT-A=Surface mount leads Type A with Hi-Temp insulator
SMT-B=Surface mount leads Type B with Hi-Temp insulator
HT=Hi-Temp insulator for Hi-Temp soldering processes
up to 260°C (Add this option for thru-hole products only.
All SMT products are manufactured with Hi-Temp insulators)
312
L=Low profile 1.50 mm insulator thickness
www.adam-tech.com
.100" PIN HEADERS
.100" [2.54] CENTERLINE
PH SERIES
PH1
A = .100 [2.54] X No. of Positions.
B = .100 [2.54] X No. of Spaces.
SINGLE ROW
.098 [2.50]
PIN 1
ph1-16-ua
A
B
Recommended PCB Layout
C
B
.098 [2.50]
D
.100 [2.54]
.025 [0.64] SQ.
.100 [2.54]
ø .040 [1.02]
PH2
A = .100 [2.54] X No. of Positions per row.
B = .100 [2.54] X No. of Spaces.
dual ROW
PIN 2
.197 [5.00]
PIN 1
ph2-32-ua
A
B
Recommended PCB Layout
C
B
.098 [2.50]
D
.100 [2.54]
.100 [2.54]
.025 [0.64] SQ.
.100 [2.54]
ø.040 [1.02]
.100 [2.54]
PH3
A = .100 [2.54] X No. of Positions per row.
B = .100 [2.54] X No. of Spaces.
Triple ROW
PIN 3
.295
[7.50]
PIN 2
PIN 1
ph3-48-ua
.200
[5.08]
A
B
Recommended PCB Layout
C
B
.098 [2.50]
D
.100 [2.54]
.025 [0.64] SQ.
.100 [2.54]
www.adam-tech.com
.100 [2.54]
.200
[5.08]
.100 [2.54]
ø.040 [1.02]
313
.100" PIN HEADERS
.100" [2.54] CENTERLINE
PH SERIES
PH1RB
PH1RA & PH1RB - SINGLE ROW
.098 [2.50]
Single Row
PIN 1
A
B
ph1rb-16-ua
.153
[3.90]
C
C
Recommended PCB Layout
.098 [2.50]
.100 [2.54]
B
.025 [0.64] SQ.
D
D
PH1RA
A = .100 [2.54] X No. of Positions.
B = .100 [2.54] X No. of Spaces.
.100 [2.54]
ø.040
[1.02]
PH2Ra
A = .100 [2.54] X No. of Positions per row.
B = .100 [2.54] X No. of Spaces.
Dual Row
PIN 2
PH2RA - DUAL ROW
.197 [5.00]
PIN 1
A
B
ph2ra-32-ua
.100 [2.54]
PCB LAYOUT
C
Recommended PCB Layout
.098 [2.50]
B
.153 [3.90]
.100 [2.54]
.100 [2.54]
D
.025 [0.64] SQ.
.100 [2.54]
A = .100 [2.54] X No. of Positions per row.
B = .100 [2.54] X No. of Spaces.
ø.040 [1.02]
PH3Ra
Triple Row
PIN 3
PIN 2
PH3RA - TRIPLE ROW
.295 [7.50]
PIN 1
ph3ra-48-ua
A
B
.100 [2.54]
C
.098 [2.50]
PCB LAYOUT
Recommended PCB Layout
B
.153 [3.90]
.100 [2.54]
.100 [2.54]
314
.025 [0.64] SQ.
D
www.adam-tech.com
.200
[5.08]
.100 [2.54]
ø.040 [1.02]
.100" PIN HEADERS
.100" [2.54] SURFACE MOUNT
PH SERIES
PIN 1
PH1
A = .100 [2.54] X No. of Positions.
B = .100 [2.54] X No. of Spaces.
.098 [2.50]
TYPE B
SMT-Single Row
straight
PIN 1
ph1-15-ua-smt-b
.098 [2.50]
TYPE A
Recommended PCB Layout
A
B
B
.100 [2.54]
C
.098 [2.50]
.100 [2.54
.130 [3.30]
.216
[5.50]
.197
[5.00]
.025
[0.64] SQ
B
.100 [2.54]
.039
[1.00]
.039
[1.00]
.079 [2.00]
RECOMENDED PCB LAYOUT
TYPE A
SMT-A
PH2
A = .100 [2.54] X No. of Positions per row.
B = .100 [2.54] X No. of Spaces.
PIN 2
SMT-Dual Row
straight
.197 [5.00]
PIN 1
TYPE
B
SMT-B
ph2-26-UA-SMT
A
B
.100 [2.54]
B
.100 [2.54]
.039 [1.00]
C
.098 [2.50]
.100 [2.54]
.130 [3.30]
.295
[7.50]
.025 [0.64] SQ.
.315
[8.00]
.079 [2.00]
Recommended
PCB
Layout
RECOMENDED PCB
LAYOUT
PH1RB
A = .100 [2.54] X No. of Positions.
B = .100 [2.54] X No. of Spaces.
PIN 1
SMT-Single Row
right angle
.098 [2.50]
A
B
ph1RB-10-ua-smt
C
B
.100 [2.54]
.039 [1.00]
.098 [2.50]
.180 [4.57]
.100 [2.54]
Recommended
PCB
Layout
RECOMENDED PCB
LAYOUT
PIN 2
.197 [5.00]
PIN 1
.079 [2.00]
0.154
[3.90]
A
B
PH2rA
A = .100 [2.54] X No. of Positions per row.
B = .100 [2.54] X No. of Spaces.
.100 [2.54]
SMT-dual Row
right angle
ph2RA-20-ua-smt
C
B
.100 [2.54]
.039 [1.00]
.098 [2.50]
.180 [4.57]
.216
[5.50]
.100 [2.54]
.079 [2.00]
Recommended
PCB Layout
RECOMENDED PCB LAYOUT
www.adam-tech.com
315
.100" PIN HEADERS
Dual Insulator .100" [2.54] CENTERLINE
DPH SERIES
DPH-1
.098
[2.50]
.098
[2.50]
B
.098
[2.50]
B
.098
[2.50]
C
C
E
E
D
.100
[2.54]
.100 [2.54]
B
.217
[5.50]
.100
[2.54]
ø.040
[1.02]
B
RECOMENDED PCB LAYOUT
DPH-2
.040
[1.00]
Dph-1-12-u-.200/smt/.220-A
Recommended PCB Layout
Recommended PCB Layout
.197
[5.00]
.025 [0.64] SQ.
.100
[2.54]
.025 [0.64] SQ.
RECOMMENDED PAD LAYOUT
DPH-2-SMT
A
A
.197 [5.00]
.197 [5.00]
.100
[2.54]
B
.098
[2.50]
B
.100
[2.54]
.098
[2.50]
C
C
E
E
D
.100
[2.54]
.100
[2.54]
DPH-1-SMT
.098 [2.50]
A
.098 [2.50]
A
.100
[2.54]
.025
[0.64] SQ.
B
.100 [2.54]
.025 [0.64] SQ.
B
.100
[2.54]
.100 [2.54]
.315
[8.00]
.295
[7.50]
.040 [1.00]
.059
[1.50]
ø.040 [1.02]
Recommended
PCB
Layout
RECOMENDED
PCB
LAYOUT
Dph-2-22-u-.220/.100/.350
Recommended PCB Layout
RECOMENDED PAD LAYOUT
Dph-2-16-u-.250/smt/.300
ORDERING INFORMATION
DPH
2
20
SERIES INDICATOR
DPH =Dual insulator
.100" centerline
NO. OF ROWS
1=Single row
2=Dual row
3=Triple row
POSITIONS
1 thru 40 (single row)
4 thru 80 (dual row)
3 thru 120 (triple row)
A = .100 [2.54] x No. of Positions.
B = .100 [2.54] x No. of Spaces.
316
SG
.XXX"/.XXX"/.XXX"
(C DIM) (D DIM) (E DIM)
PLATING
U = Gold plated
T = Tin plated
SG = Gold plating
in contact
area, tin plating
on solder tails
SPECIFIED IN INCHES AS:
C Dim. / D Dim. / E Dim.
(replace D Dim. with SMT
for surface mount option)
RECOMMENDED PCB LAYOUT
www.adam-tech.com
MINI SHUNTS
.050", 2mm, .100" & .200" CENTERLINE
MS SERIES
Introduction:
Adam Tech MS Series Mini Shunts are available in .050", 2.0mm,
.100" and .200" centerlines. They quickly and easily jump individual
pins on pin headers to perform manual programming on PCB’s. This
series offers a broad range of sizes, shapes and colors. Shunts
are designed with detents at top for easy fingertip installation and
removal. Options include integrated pull tabs and gang types which
are molded in one piece. This series is extremely low cost and
is a highly economical, cost effective solution to replacing PCB
switches. Adam Tech’s shunts are available in Gold or Tin plating.
Features:
Electrically connects two or more pin header posts
Wide variety of bodies and styles to choose from
Superior insulator design provides easy Fingertip extraction
Pull Tab and Ganged options available
Choice of Gold or Tin-plated contact area
Side and end stackable
Mating Options:
Mates with .025" sq. pin headers on .100" centers and all industry
standard pin headers with .025" square post on .100" [2.54mm]
centerlines.
ORDERING INFORMATION
MSB
G
Specifications:
Material:
Insulator: PBT, rated UL94V-0
Insulator Color: Black
Contacts: Phosphor Bronze
Contact Plating:
G = Gold over nickel underplate overall
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 3 Amps max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 1.57 lbs max.
Withdrawal force: .65 lbs min
Mating durability: 50 Cycles Gold
20 Cycles Tin
PLATING
BODY STYLE/HEIGHT
G =Gold plated
MSA =Closed top, .256"
T =Tin plated
MSB =Open top, .236"
MSC =Open top, .177"
MSDA =Closed top, .315"
MSDB =Open top, .315"
MSBH =Handle-top, .531"
HMSA=.050" Mini Shunt (1 x 2)
HMSB=.050" Mini Shunt (2 x 2)
HMSC=.050" Mini Shunt, .118"
MSE =Closed top, 3 position
MST =10 piece strip
MSBG =Ganged, block type
(Specify # of positions, 2 thru 10)
2.00mm Shunts - Pg. 301
Temperature Rating:
Operating temperature: -40°C to +105°C
OPTIONS:
Add designator(s) to end of part number
30 = 30 µin gold plating in contact area
Packaging:
Anti-ESD plastic bags
Safety Agency Approvals:
UL Recognized & CSA Certified, File no. E224053
www.adam-tech.com
STANDARD INSULATOR COLOR IS BLACK
Other insulator colors available
Add designator(s) to end of part number
R =Red *
B =Blue *
W=White *
Y =Yellow *
G =Green *
* Minimum order required
317