MSS20,000 Series Zero Bias Schottky Diodes Description Features The Aeroflex / Metelics MSS20,000 series of Schottky diodes is fabricated on P-Type epitaxial substrates for superior 1/f noise performance in microwave zero-bias detector applications up to 40 GHz. • • • Very low 1/f Noise Detector applications to 40 GHz Chip, beam lead or packaged devices Absolute Maximum Ratings Parameters Rating Reverse Voltage 1.0 Volts Forward Current 35 mA Operation Temperature -65 ºC to +150 ºC Storage Temperature -65 ºC to +150 ºC CW Power Dissipation 100 mW, derated linearly to zero at TA = +150 ºC Soldering Temperature (Packaged) + 230 ºC for 5 sec. Chip Electrical Specifications, TA = 25 ºC CJ TSS RV RV γ Frequency MAX TYP MIN MAX TYP MAX pF dBm Ω Ω mV / mW GHz MSS20,046-C15 0.10 -58 1000 2000 5000 18 C15 MSS20,047-C15 0.10 -59 2000 6000 8000 18 C15 MSS20,050-C15 0.15 -58 1000 2000 5000 12 C15 MSS20,051-C15 0.15 -59 2000 6000 8000 12 C15 MSS20,054-C15 0.20 -58 1000 2000 5000 8 C15 MSS20,055-C15 0.20 -59 2000 6000 8000 8 C15 f = 1 MHz f = 10 GHz PIN = -30 dBm VR = 0 V NF = 3dB Video BW = 500 KHz Model Test Conditions Revision Date: 05/20/05 RL = 1 MΩ Outline MSS20,000 Series Zero Bias Silicon Schottky Diodes Beam Lead Electrical Specifications, TA = 25 ºC CJ TSS RV RV γ Frequency MAX TYP MIN MAX TYP MAX pF dBm Ω Ω mV / mW GHz MSS20,140-B10D 0.08 -58 1000 2000 5000 40 B10D MSS20,141-B10D 0.08 -59 2000 6000 8000 40 B10D MSS20,142-B10D 0.10 -58 1000 2000 5000 26 B10D MSS20,143-B10D 0.10 -59 2000 6000 8000 26 B10D MSS20,145-B10D 0.12 -58 1000 2000 5000 18 B10D 2000 6000 8000 18 B10D Model MSS20,146-B10D 0.12 -59 Test Conditions f = 1 MHz VR = 0 V f = 10 GHz NF = 3dB PIN = -30 dBm Video BW = 500 KHz Outline RL = 1 MΩ Packaged Electrical Specifications, TA = 25 ºC CT TSS RV RV γ Frequency MAX TYP MIN MAX TYP MAX pF dBm Ω Ω mV / mW GHz MSS20,046-H27 0.22 -58 1000 2000 5000 18 H27 MSS20,046-E25 0.18 -58 1000 2000 5000 18 E25 MSS20,046-T86 0.28 -58 1000 2000 5000 18 T86 MSS20,047-H27 0.22 -59 2000 6000 8000 18 H27 MSS20,047-E25 0.18 -59 2000 6000 8000 18 E25 MSS20,047-T86 0.28 -59 2000 6000 8000 18 T86 MSS20,050-H27 0.27 -58 1000 2000 5000 12 H27 MSS20,050-E25 0.23 -58 1000 2000 5000 12 E25 MSS20,050-T86 0.33 -58 1000 2000 5000 12 T86 MSS20,051-H27 0.27 -59 2000 6000 8000 12 H27 MSS20,051-E25 0.23 -59 2000 6000 8000 12 E25 MSS20,051-T86 0.33 -59 2000 6000 8000 12 T86 MSS20,054-H27 0.32 -58 1000 2000 5000 8 H27 MSS20,054-E25 0.28 -58 1000 2000 5000 8 E25 MSS20,054-T86 0.38 -58 1000 2000 5000 8 T86 MSS20,055-H27 0.32 -59 2000 6000 8000 8 H27 MSS20,055-E25 0.28 -59 2000 6000 8000 8 E25 MSS20,055-T86 0.38 -59 2000 6000 8000 8 T86 f = 1 MHz VR = 0 V f = 10 GHz NF = 3dB Model Test Conditions 2 Revision Date: 05/20/05 PIN = -30 dBm Video BW = 500 KHz Aeroflex / Metelics, Inc. www.aeroflex-metelics.com RL = 1 MΩ Outline MSS20,000 Series Zero Bias Silicon Schottky Diodes Typical Performance, TA = 25 ºC Figure 1. Figure 2. Detected Output vs. RF Input Po Power Video Resistance stance vs. RF F Input Pow Power 6 (IGHG f = 10 GHz, Tuned at -30 dBm B R L = 1 MΩ M6 ,OWG VOUT VR ( ) M6 M6 M6 M6 f = 10 GHz, H Tuned at -30 dBm R L = 1 MΩ Ω PIN (dBm) PIN (dBm) Figure 3. Detector Output vs. Temperature R V = 2 KΩ Δ VOUT (dB) f = 10 GHz, Tuned at -30 dBm B R L = 1 MΩ Temperature ( ºC) Outline Drawings B10D C 15 C15 B10D 17 [.432] 13 [.330] 6.5 [0.165] 3.5 [0.089] 0.55 [0.014] 0.25 [0.006] Top contact is cathode. Top Contact 1.1 [0.028] 0.9 [0.023] 17 [.432] 13 [.330] 3.5 [0.089] 1.2 [0.030] Cut lead is Anode 31 [0.787] 27 [0.686] 12 [0.305] 9 [0.229] 12 [0.305] 9 [0.229] 6 [0.152] 4 [0.102] Back View Back Contact Aeroflex / Metelics, Inc. www.aeroflex-metelics.com Back Less Than 0.5 [0.013] Lp = 0.1nH Cp = 0.015pF 3 Revision Date: 05/20/05 MSS20,000 Series Zero Bias Silicon Schottky Diodes Outline Drawings E25 (non-hermetic) H27 H27 (hermetic) Cp=0.12pF Lp=0.4nH 55 [1.397] SQ. 45 [1.143] E25 72 [1.829] Dia 65 [1.651] Cp=0.07pF Lp=0.4nH 23 [0.584] 17 [0.432] Cut Lead is Cathode Cut lead is Cathode 18 [0.457] 12 [0.305] 75 [1.905] 65 [1.651] Square Epoxy 130 [3.302] Min. 2 Pls 8 [0.203] 4 [0.102] 5 [0.127] 2Pls 3 [0.076] 50 [1.270] Max. 6 [0.152] 3 [0.076] 14 [0.356] 8 [0.203] Ceramic 35 [0.889] 25 [0.635] T86 T86 Cp=0.18pF Lp=1.0nH 80 [2 032] Min 124 [3.150] Dia. 118 [2.997] (hermetic) 64 [1.626] 60 [1.524] 27 [0.686] Max. Ceramic Body 225 [5.715] 205 [5.207] 64 [1.626] 60 [1.524] 64 [1.626] Dia. 60 [1.524] 83 [2.108] Dia. 77 [1.956] Heat Sink is Cathode except for MSS20, MSS39 and MBD Aeroflex / Metelics Aeroflex Microelectronic Solutions 975 Stewart Drive, Sunnyvale, CA 94085 TEL: 408-737-8181 Fax: 408-733-7645 www.aeroflex-metelics.com [email protected] Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2003 Aeroflex / Metelics. All rights reserved. Revision Date: 05/20/05 attributes represented by these three icons: solution-minded, performance-driven and customer-focused.