CB Series Connectors CB Series “PogoPin” Connectors Compact Filter Receptacles for Panel Mounting Planar filter array receptacles use capacitors and ferrite inductors for attenuation of unwanted high frequency noise and interference. Select the appropriate mounting style (jam nut or flange mount) and the desired filter topology (Pi or C). Stainless steel body and jam nut, with black chromate finish. Available with 7 or 10 contacts. Mates to standard CB plug connectors. Solder cup or printed circuit board contacts. A B F C G E 1 D Style 1 Flange mount receptacle for front panel mounting. 2 Style 2 Jam nut receptacle for rear panel mounting. Fits up to 3mm panel thickness. How To Order Voltage (DWV) specifications Current 50 VDC maximum 2.5 Amps maximum Insulation 5000 megohms minimum Resistance Maximum Wire Size #20 AWG Shell Stainless steel w/ black chromate Jam Nut Stainless steel w/ black chromate O-Ring Silicone Interfacial Seal Silicone Contact 240-063 - 02 7 Water MIL-STD-810 Method 512 1 Immersion meter Ingress Protection IP68 Mating Cycles 5000 cycles minimum 02 - Flange Mount Receptacle 07 - Jam Nut Receptacle CODE A B C D E F G 7 Pin 1, 2, 3, 4 10 Pin N, W, X,Y, Z Filter Type 7 -7 Contacts 10-10 Contacts Shell Style Copper alloy, gold plated © 2007 Glenair, Inc. CB Filter Connector Key Position Contact Arrangement C - C Section P - PI Section P C Contact Style P-PC Tail S-Solder Cup CAPACITANCE value PI - SECTION (pF) 38,000 - 56,000 32,000 - 45,000 18,000 - 33,000 8,000 - 12,000 3,300 - 5,000 800 - 1,300 400 - 600 All dimensions in millimeters (mm). Information subject to change without notice. CAGE Code 06324 A 1 Capacitance Value (See Table) C - SECTION (pF) 19,000 - 28,000 16,000 - 22,500 9,000 - 16,500 4,000 - 6,000 1,650 - 2,500 400 - 650 200 - 300 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 16 E-Mail: [email protected] CB Series Connectors CB Series “PogoPin” Connectors Filter Jam Nut Receptacle Dimensions 29.2 MAX 16.2 MAX LOCATION OF POLARIZING COLOR CODE A G F O-RING 3.5 Ø.51 ± 0.05 B 12.8 / -0.1) 12.8(+0 MAX FLATS FLATS C E 3.0 MAX JAM NUT Ø 12.8 MAX. D Ø 1.14 2.0 Ø 17.0 MAX M14 x 0.75 2.5 WASHER Panel cutouts and printed circuit board mounting patterns are shown on page 13. 3.0 MAX PANEL Filter Flange Mount Receptacle Dimensions Ø 3.7/3.3 THRU HOLE 2 PLCS LOCATION OF POLARIZING COLOR CODE 3.5 RAD 3.5 A Ø 18.0 1.5 ± 0.15 Ø.51 ± 0.05 B Ø 13.5 MAX. F C G E Ø 12.8 MAX. D Ø 1.14 25.0 ± 0.1 29.2 MAX. 32.0 MAX. 7 Pin Receptacle Connector Mating Face and Key Positions A G F 2.5 13 MAX. Panel cutouts and printed circuit board mounting patterns are shown on page 13. 10 Pin Receptacle Connector Mating Face and Key Positions 30° B C E B D A G A F K J B H C E D Position A B Color Code 1 2 3 4 120° 130° 135° 165° White Yellow Green Pink 90° 105° 110° 100° © 2007 Glenair, Inc. B A Position A B Color Code N W X Y Z 140° 115° 105° 120° 145° White Blue Violet Chrome Yellow Dark Red All dimensions in millimeters (mm). Information subject to change without notice. CAGE Code 06324 95° 85° 100° 110° 80° Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 17 E-Mail: [email protected] CB Series Connectors CB Series “PogoPin” Connectors 7 Pin Filter Jam Nut Receptacle for Rear Panel Mounting Eliminate unwanted high frequency electrical interference with European standard filtered CB07 connector. Stainless steel body and jam nut, with black chromate finish. Mates to standard CB07 plug connectors. Printed circuit board contacts are gold plated. Watertight when unmated, CB07 filtered connectors offer 5000 cycles of mating and meet harsh environment requirements. 7 Pin Filter Receptacle Polarizing Position 1 (Blue) CB07C1L1F Polarizing Position 2 (Yellow) CB07C2L1F Polarizing Position 3 (Green) CB07C3L1F Polarizing Position 4 (Pink) CB07C4L1F 34.0 16.2 MAX LOCATION OF POLARIZING COLOR CODE A G F B O-RING 1.0 Ø 17.0 D Ø 20.0 MAX M14 x 0.75 2.0 WASHER specifications Capacitance 3000 pF at 25°C,1 KHz, 1Vrms Voltage (DWV) 50 VDC maximum Current 2.5 Amps maximum Insulation Resistance 5000 megohms minimum Shell 3.0 MAX PANEL Panel cutouts and printed circuit board mounting patterns are shown on page 13. Printed Circuit Board Pattern Stainless steel w/ black chromate Jam Nut Stainless steel w/ black chromate O-Ring, Face Seal Silicone Contact Copper alloy, gold plated Water Immersion MIL-STD-810 Method 512 1 meter Ingress Protection IP68 Mating Cycles 5000 Cycles minimum © 2007 Glenair, Inc. 2.7 12.8 / -0.1) 12.8(+0 MAX FLATS FLATS C E 3.0 MAX JAM NUT Connector Mating Face and Key Positions CL 2.6 A 3 3 A 2.6 G C 1.5 B B B C E 1.5 F G F D A CL E D Position A B Color Code 1 2 3 4 120° 130° 135° 165° White Yellow Green Pink All dimensions in millimeters (mm). Information subject to change without notice. CAGE Code 06324 90° 105° 110° 100° Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 18 E-Mail: [email protected]