S3K2R Pin Diode Switch Single Pole, Three Throw Reflective Features: • Incorporated TTL-compatible driver for convenient system integration and operates from +5 V and -15 V DC power supplies. • DC blocks at all RF ports. • Ruggedized construction. • RoHS-compliant versions available. • Hermetic versions available. Specifications: Parameter Specification Units 12 – 18 GHz Insertion Loss (max) 3.0 dB VSWR (max) 50 ohms 2.0 ratio Isolation (min) 60 dB Switching Speed (max) 100 nsec CW RF Power, Operating (max) 0.5 W Frequency Range Notes: Mechanical Specifications: DC Bias: (Standard) +5 V +/- 0.5 V @ 120 mA max -15 V +/- 3 V @ 50 mA max DC Bias: (-5 option) +5 V +/- 0.5 V @ 150 mA max -5 V +/- 0.5 V @ 60 mA max DC Bias: (-12 option) +15 V +/- 3 V @ 120 mA max -15 V +/- 3 V @ 50 mA max Control: TTL 0 = Low Loss TTL 1 = Isolation E1 controls J2 – J1 E2 controls J3 – J1 E3 controls J4 – J1 Switching speed is defined as 50% TTL to 90% RF (t-on) and 50% TTL to 10% RF (t-off). Environmental Specifications: MIL-E-5400, MIL-STD-202, MIL-E-16400 Operating Temp: -55 °C to +85 °C Storage Temp: -65 °C to +125 °C Humidity: MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F, M105, Cond B Vibration: MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F, M107, Cond A Temperature Cycle: MIL-STD-202F, M105C, Cond D SIGNAL & CONTROL SOLUTIONS Revision Date: 2/23/2014 Case Style: S3 Outline Finish: Gold Plate per MIL-G-45204 Chem film per MIL-C-5541 Bias & Control Pins: ø0.02” x 0.15” long Weight: 35 g max Mounting: ø0.10” through holes (4) places Screening: Internal Visual per MIL-STD-883, Method 2017 Temperature Cycle: -65 °C to +100 °C, 10 cycles Hermetically-sealed switches are fine and gross leak checked per MIL-STD-883, Method 1014. Optional High-Rel screening available upon request. Contact the factory to discuss your screening requirements. 40 Industrial Way East, Eatontown , NJ 07724 [USA] Phone: (732) 460-0212, Fax: (732) 460-0214 www.aeroflex.com/ascs, email: [email protected] S3K2R Pin Diode Switch, SP3T, Reflective SIGNAL & CONTROL SOLUTIONS Outline Drawing: 0.40 0.20 0.40 0.15 TYP. 0.15 TYP. 1.20 1.000 0.10 MODEL NUMBER 0.10 +V 1.20 1.000 J2 J1 -V 0.40 0.60 (2) PLCS. G E3 ACC E1 SN: 0000 0.40 0.50 Ø0.020 X 0.15 LG SOLDER PIN (6) PLCS. J4 DC: WWYY J3 E2 SMA FEMALE (4) PLCS. Ø0.100 THRU MOUNTING HOLE (4) PLCS. 0.60 (2) PLCS. 0.38 REF 0.40 OUTLINE CASE STYLE S3 Part Number Ordering Information: • • • • • • • • Add Add Add Add Add Add Add Add “-RC” suffix: RoHS-compliant “-H” suffix: Hermetic seal “-5” suffix: +/-5 V DC supplies “-5-RC” suffix: +/-5 V DC supplies, RoHS-compliant “-5-H” suffix: +/-5 V DC supplies, Hermetic seal “-12” suffix: +/-15 V DC supplies “-12-RC” suffix: +/-15 V DC supplies, RoHS-compliant “-12-H” suffix: +/-15 V DC supplies, Hermetic seal ISO 9001:2008 certified Aeroflex Signal & Control Solutions Aeroflex Microelectronic Solutions 40 Industrial Way East Eatontown , NJ 07724 [USA] Fax: (732) 460-0214 Sales Phone: (732) 460-0212 [email protected] www.aeroflex.com/Microwave www.aeroflex.com/ASCS Aeroflex Signal & Control Solutions reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2014 Aeroflex Signal & Control Solutions. All rights reserved. Revision Date: 2/23/2014 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.