ACSM-2034 Bolt Channel Schottky Detector Features: • Contains hermetically sealed modules, internal RF matching, DC return, and RF bypass capacitor. • The video port is protected from static or transient charges. • Input impedance matching. • Models may be chosen for broadband RF performance of for optimized narrow bands Specifications: Parameter Specification Frequency Range (min) Units 12 – 18 GHz Sensitivity (min) 1800 mV/mW Flatness vs. Frequency (max) 0.75 ±dB Typical TSS -51 dBm Nominal Video Capacitance 12 pF Notes: SCREENING: Maximum input power: +20 dBm Internal Visual per MIL-STD-883, Method 2017 Sensitivity is measured into an open circuit load (>10 k ohm). Temperature Cycle: -65°C to +100°C, 10 cycles Standard bias is 100 uA. Video capacitance is used for RF bypass. This value can be changed if required for video response time. Contact the factory for more information. OPTIONAL HIGH-REL SCREENING (Ref MIL-PRF-38534): Stabilization Bake per MIL-STD-883, Method 1008 Temperature Cycle per MIL-STD-883, Method 1010 Environmental Specifications: Designed to meet: Constant Acceleration per MIL-STD-883, Method 2001 MIL-E-5400, MIL-STD-202, MIL-E-16400 Burn-in per MIL-STD-883, Method 1015 Operating Temp: -55°C to +125°C Leak Test per MIL-STD-883, Method 1014 Storage Temp: -65°C to +150°C External Visual per MIL-STD-883, Method 2009 Humidity: MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F, M105, Cond B Vibration: MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F, M107, Cond A Temperature Cycle: MIL-STD-202F, M105C, Cond D SIGNAL & CONTROL SOLUTIONS Revision Date: 10/3/2013 40 Industrial Way East, Eatontown , NJ 07724 [USA] Phone: (732) 460-0212, Fax: (732) 460-0214 www.aeroflex.com/ascs, email: [email protected] ACSM-2034 Bolt Channel Schottky Detector SIGNAL & CONTROL SOLUTIONS Outline Drawing: 0.280±.005 0.079±.002 Ø0.096±.003 THRU (2) PLCS. 0.160 DETAIL NOT TO SCALE 0.020 MIN 0.004 MIN 0.135±.010 (2) PLCS. 0.080±.001 COLORED DOT INPUT (2) PLCS. 0.205±.003 0.126±.004 SEE DETAIL 0.062±.002 STANDARD CASE STYLE C3 (Optional Case Styles – C8, C15) Part Number Ordering Information: • • • • Add Add Add Add desired polarity suffix: “N” for Negative, “P” for Positive (Ex: ACSM-2034N) “Z” for zero biased schottky option (Ex: ACSM-2034NZ) case style suffix: “M51” (Ex: ACSM-2034NZM51) “-RC” suffix: RoHS-compliant (Ex: ACSM-2034NZM51-RC) Notes (Continued): • • • This part number is also available with a zero bias schottky diode. Due to higher impedance, the zero bias schottky will exhibit less sensitive TSS (typically a 3 dB reduction) The temperature performance of the zero bias schottky is poor when operating at low input power levels. ISO 9001:2008 certified Aeroflex Signal & Control Solutions Aeroflex Microelectronic Solutions 40 Industrial Way East Eatontown , NJ 07724 [USA] Fax: (732) 460-0214 Sales Phone: (732) 460-0212 [email protected] www.aeroflex.com/Microwave www.aeroflex.com/ASCS Aeroflex Signal & Control Solutions reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2013 Aeroflex Signal & Control Solutions. All rights reserved. Revision Date: 10/3/2013 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.