S1U2 Pin Diode Switch, Single Pole, Single Throw, Absorptive

S1U2 Pin Diode Switch
Single Pole, Single Throw
Absorptive
Features:
•
Incorporated TTL-compatible driver for
convenient system integration and operates
from +5 V and -15 V DC power supplies.
•
DC blocks at all RF ports.
•
Ruggedized construction.
•
RoHS-compliant versions available.
•
Hermetic versions available.
Specifications:
Parameter
Specification
Units
0.5 – 2
GHz
Insertion Loss (max)
1.5
dB
VSWR (max) 50 ohms
1.6
ratio
Isolation (min)
80
dB
Switching Speed (max)
100
nsec
1
W
Frequency Range
CW RF Power, Operating (max)
Notes:
Mechanical Specifications:
DC Bias: (Standard) +5 V +/-0.5 V @ 50 mA max
-15 V +/- 3 V @ 50 mA max
DC Bias: (-5 option) +5 V +/- 0.5 V @ 60 mA max
-5 V +/ -0.5 V @ 60 mA max
DC Bias: (-12 option) +15 V +/- 3 V @ 50 mA max
-15 V +/- 3 V @ 50 mA max
Control: TTL 0 = Low Loss
TTL 1 = Isolation
Absorptive Switch: 50 ohm termination present at both RF ports
(in isolation mode).
Switching speed is defined as 50% TTL to 90% RF (t-on) and 50%
TTL to 10% RF (t-off).
Case Style:
S1 Outline
Finish: Gold Plate per MIL-G-45204
Bias & Control Pins: ø0.02” x 0.15” long
Weight:
20 g max
Mounting:
ø0.10” through holes
(4) places
Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65 °C to +100 °C, 10 cycles
Hermetically-sealed switches are fine and gross leak checked per
MIL-STD-883, Method 1014.
Optional High-Rel screening available upon request. Contact the
factory to discuss your screening requirements.
Environmental Specifications:
MIL-E-5400, MIL-STD-202, MIL-E-16400
Operating Temp:
-55 °C to +85 °C
Storage Temp:
-65 °C to +125 °C
Humidity: MIL-STD-202F, M103, Cond B
Shock: MIL-STD-202F, M213, Cond B
Altitude: MIL-STD-202F, M105, Cond B
Vibration: MIL-STD-202F, M204, Cond B
Thermal Shock: MIL-STD-202F, M107, Cond A
Temperature Cycle:
MIL-STD-202F, M105C, Cond D
SIGNAL & CONTROL SOLUTIONS
Revision Date: 1/20/2014
40 Industrial Way East, Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212, Fax: (732) 460-0214
www.aeroflex.com/ascs, email: [email protected]
S1U2 Pin Diode Switch
SPST, Absorptive
SIGNAL & CONTROL SOLUTIONS
Outline Drawing:
0.15
1.20
0.35
1.00
0.10
0.10
0.45
ACC
J1 SN:
0000
-V
G
DC: J2
WWYY
+V
0.70
E1
0.90
MODEL NUMBER
SMA FEMALE
(2) PLCS.
Ø 0.10 THRU
MOUNTING HOLE
(4) PLCS.
Ø0.020 X 0.15 LG
SOLDER PIN
(4) PLCS.
0.15
0.38
0.15 (3) PLCS.
0.38
REF.
OUTLINE CASE STYLE S1
Part Number Ordering Information:
•
•
•
•
•
•
•
•
Add
Add
Add
Add
Add
Add
Add
Add
“-RC” suffix: RoHS-compliant
“-H” suffix: Hermetic seal
“-5” suffix: +/-5 V DC supplies
“-5-RC” suffix: +/-5 V DC supplies, RoHS-compliant
“-5-H” suffix: +/-5 V DC supplies, Hermetic seal
“-12” suffix: +/-15 V DC supplies
“-12-RC” suffix: +/-15 V DC supplies, RoHS-compliant
“-12-H” suffix: +/-15 V DC supplies, Hermetic seal
ISO 9001:2008 certified
Aeroflex Signal & Control Solutions
Aeroflex Microelectronic Solutions
40 Industrial Way East
Eatontown , NJ 07724 [USA]
Fax: (732) 460-0214
Sales
Phone: (732) 460-0212
[email protected]
www.aeroflex.com/Microwave www.aeroflex.com/ASCS
Aeroflex Signal & Control Solutions reserves the right to make changes to any products
and services herein at any time without notice. Consult Aeroflex or an authorized sales
representative to verify that the information in this data sheet is current before using
this product. Aeroflex does not assume any responsibility or liability arising out of the
application or use of any product or service described herein, except as expressly
agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or
service from Aeroflex convey a license under any patent rights, copyrights, trademark
rights, or any other of the intellectual rights of Aeroflex or of third parties.
Copyright 2014 Aeroflex Signal & Control Solutions. All rights reserved.
Revision Date: 1/20/2014
Our passion for performance is defined by three
attributes represented by these three icons:
solution-minded, performance-driven and customer-focused.