Master Catalog ED3141 Series Hardened 10/100BASE-TX Ethernet Extender Wide Temp ITS Value UL508 Specific design for industrial communication applications with UL508 safety certification ISA 12.12.01 (UL1604) Certified for Class I, Division 2 Classified for use in hazardous locations Alternative long-distance Ethernet solution to reduce infrastructure cost and shorten the project schedule by using existing copper wires Features Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment Ethernet Extender (RJ-11 and Terminal Block) Port: Symmetrical on the VDSL, High-speed Full-duplex up to 100Mbps communications link over existing copper telephone wire Ten speeds with speed indicator LEDs on front panel of unit, Operates transparent to higher layer protocols such as TCP/IP ▪ Up to 50Mbps @ about 300meters (984ft.), Ethernet Port: 10/100Mbps-Full/Half-duplex, Auto-Negotiation, ▪ 1Mbps @ about 1,900meters (6,232ft.) Auto-MDI/MDIX Redundant power inputs with Terminal Block and DC Jack Support DIP switch to select Local or Remote side -40°C to 75°C (-40°F to 167°F) operating temperature range Hardened aluminum case Supports DIN-Rail , Panel, and Rack Mounting installation Ordering Information ED3141-00B Hardened 10/100BASE-TX Ethernet Extender Power Supply : (Optional) *Option A - The Terminal Block type external power supplies are not included. Please order the following part numbers: DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X (X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP **Option B - The external power adapters and power cords are not included. Please order the following part numbers: 41-136044-X (X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP Installation Type : Optional Panel mount kit, part number: KP-AA96-480 223 IEEE802.3x 2 Transparent to higher layer protocols Processing Type Half-duplex back-pressure and IEEE802.3x Full-duplex 3 4 flow control 5 NOTE: All speed selections are Symmetrical on the DSL. Power Input Input Voltage: 12 to 30VDC (Terminal Block); 12VDC (DC Jack) Power Consumption 4.2W Max. 0.35A @ 12VDC, 0.175A @ 24VDC Overload Current Protection Reverse Polarity Protection Environment Operating Temperature -40°C to 75°C (-40°F to 167°F) Tested @ -40°C to 85°C (-40°F to 185°F) Present Storage Temperature -40°C to 85°C (-40°F to 185°F) Ambient Relative Humidity 5% to 95% (non-condensing) Present Regulatory Approvals Mechanical Casing Aluminum case IP30 Dimensions 50mm (W) x 110mm (D) x 135mm (H) (1.97" (W) x 4.33" (D) x 5.31" (H)) Weight 0.8Kg (1.76lbs.) Installation DIN-Rail (Top hat type 35mm), Panel, Rack Mounting ISO Manufactured in an ISO9001 facility Safety UL508 ISA 12.12.01, Class I, Division 2 Classified for use in hazardous locations EMI FCC Part 15, Class A EN61000-6-3 - EN55022 - EN61000-3-2 - EN61000-3-3 EMS EN61000-6-2 - EN61000-4-2 (ESD Standards) Contact: + / - 4KV Air: + / - 8KV - EN61000-4-3 (Radiated RFI Standards) 10V/m, 80 to 1000MHz; 80% AM - EN61000-4-4 (Burst Standards) Signal Ports: + / - 4KV D.C. Power Ports: + / - 4KV - EN61000-4-5 (Surge Standards) Signal Ports: + / - 1KV; Line-to-Line D.C. Power Ports: + / - 0.5KV; Line-to-earth - EN61000-4-6 (Induced RFI Standards) Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM - EN61000-4-8 (Magnetic Field Standards) 30A/m @ 50, 60Hz Interface Ethernet Port Port: One RJ-45 port, 10/100BASE-TX Full/Half-duple Auto-Negotiation, Auto-MDI/MDIX PoE Port: complies with IEEE802.3af and IEEE802.3at standard Speed: 10/100Mbps Distance: 100meters (328ft.) Cable: 10BASE-T: UTP CAT. 3, 4, 5 (2-pair wire) 100BASE-TX: UTP CAT. 5 (4-pair wire) Ethernet Extender Port Ethernet Extenders Protocols Distance 1,900m(6,232ft.) 1,800m(5,904ft.) 1,600m(5,294ft.) 1,400m(4,593ft.) 1,200m(3,936ft.) 1,000m(3,280ft.) 800m(2,624ft.) 700m(2,296ft.) 600m(1,968ft.) 300m(984ft.) Port: One RJ-11 and Terminal Block port Speed: 1/3/5/10/15/20/25/30/40/50Mbps Distance: 1900meters (6,232ft.) Cable: Telephone wire 24 AWG (0.5mm diameter, 1-pair DIP switch One DIP Switch: Local (CO) or Remote (CPE) LED Indicators Per Unit: Power Status (Power) IEC60068-2-6 Fc (Vibration Resistance) 5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/ Transport) IEC60068-2-27 Ea (Shock) 25g @ 11ms (Half-Sine Shock Pulse; Operation) 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) FED STD 101C Method 5007.1 (Free fall w/ package) -Tested with Cross Weight and Drop High standard table Environmental Test Compliance wire) or larger Wireless Devices 1 IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, Speed 1Mbps 3Mbps 5Mbps 10Mbps 15Mbps 20Mbps 25Mbps 30Mbps 40Mbps 50Mbps Serial Device Servers Standards LED Green Amber Green Amber Green Amber Green Amber Green Amber LED Indicators Accessories Technology Ethernet Switches Specifications 03 Media Converters Ethernet Extenders Per Port: 10/100TX: Link/Activity, Full-duplex Line: Error, Link, Local, Remote Diagrams Unit: mm 135 50 - - 110 + + Loc Loc Rmt Rmt er1 2 Top w Po 3 Back D Side er Front er GND w Po w Po Bottom www.etherwan.com 224