Ethernet Extenders over Coaxial Cable ED3341 Series Hardened 10/100BASE-TX Ethernet Extender over Coaxial Cable UL508 Overview The ED3341 Series Ethernet Extender enables the extension of Ethernet connectivity over existing coaxial cable allowing legacy infrastructure to be leveraged for IP networks and extending the Ethernet distance limitations of 100 meters. Upgrading an existing legacy control or surveillance system to a new IP-based system is a complicated task, especially when existing cable infrastructure is an old coaxial cable. EtherWAN’s ED3341 Series provides Ethernet connection and extension over these existing coaxial cables, minimizing the expense of pulling new cable infrastructure. The ED3341 Series is built with hardened specifications, providing wide temperature operation range from -40°C to 75°C to overcome severe outdoor environments. Incorporating VDSL technology, the ED3341’s BNC extender ports provide long distance transmission with 75Mbps rate at 200 meters, or 1Mbps at 2600 meters; 10 speed LED indicators in the front panel provide easy lookup for the connection speed. Spotlight •UL508 Certification ◦◦ Specific design for industrial communication applications with UL508 safety certification •EN50121-4 and EN50155 Certification ◦◦ Specific design for railway environment application •Wide Operating Temperature ◦◦ -40°C to 75°C wide operating temperature range design is suitable for installation in outdoor cabinet ED3341 1 www.EtherWAN.com rev. A3 Hardware Specifications Technology Speed / Distance Reference •IEEE802.3 10BASE-T •IEEE802.3u 100BASE-TX •IEEE802.3x full duplex and flow control Speed Distance 1-5Mbps 2,600M(8,530ft.) 6-10Mbps 2,400M(7,874ft.) Processing Type 11-16Mbps 2,000M(6,561ft.) 17-20Mbps 1,800M(5,905ft.) 21-29Mbps 1,600M(5,249ft.) 30-43Mbps 1,400M(4,593ft.) 44-54Mbps 1,200M(3,937ft.) 55-63Mbps 1,000M(3,280ft.) 64-74Mbps 600M(1,968ft.) 75-85Mbps 200M(656ft.) Standards •Half-duplex back-pressure and IEEE802.3x Full-duplex flow control •Auto Negotiation •Auto MDI/MDIX Power Input Voltage •12VDC (DC Jack) •12 to 48VDC (Terminal Block) Power Consumption •Note: All speed selections are Symmetrical on the DSL and Full-duplex on the Ethernet • 7.2W Max. 0.6A @ 12VDC, 0.15A @ 48VDC Protection Environment •Over current protection •Reverse polarity protection Operating Temperature Mechanical •-40°C to 70°C (-40°F to 158°F) Tested @ -40°C to 85°C (-40°F to 185°F) Casing •Aluminum case •IP30 Storage Temperature Dimensions Ambient Relative Humidity •-40°C to 85°C (-40°F to 185°F) •5% to 95% (non-condensing) •50mm (W) x 110mm (D) x 135mm (H) (1.97" (W) x 4.33" (D) x 5.31" (H)) Regulatory Approvals Weight ISO •0.8Kg (1.76lbs.) •Manufactured in an ISO9001 facility Installation Safety UL508 EMI FCC Part 15B, Class A EN61000-6-4, EN55022, EN61000-3-2 and EN61000-3-3 EMS EN61000-6-2 •DIN-Rail (Top hat type 35mm), Panel or Rack mounting Interface Ethernet Port •Port: One RJ-45 port •Speed: 10/100Mbps •Distance: 100meters (328ft.) •Cable: 10BASE-T: UTP CAT. 3, 4, 5 (2-pair wire) 100BASE-TX: UTP CAT. 5 (4-pair wire) Ethernet Extender Port •EN61000-4-2 (ESD Standards) •EN61000-4-3 (Radiated RFI Standards) •EN61000-4-4 (Burst Standards) •EN61000-4-5 (Surge Standards) •EN61000-4-6 (Induced RFI Standards) •EN61000-4-8 (Magnetic Field Standards) •Port: One 75Ω BNC Port (with F-type connector) •Speed: 1/5/10/20/30/40/50/60/70/75Mbps •Distance: 2600 meters (8,530ft.) •Cable: Coaxial Cable (5C2V/ RG6(=RG6/U)) DIP-Switch •One DIP Switch: Local (CO) or Remote (CPE) Environmental Test Compliance IEC60068-2-6 Fc (Vibration Resistance) IEC60068-2-27 Ea (Shock) FED STD 101C Method 5007.1 (Free fall w/ package) Industrial Compliance EN50121-4 EN50155 LED Indicators •Per Unit: Power Status (Power) •Per Port 10/100TX: Link/Activity, Full-duplex •Line: Error, Link, Local, Remote ED3341 2 www.EtherWAN.com rev. A3 Dimensions 110mm (4.33”) 50mm (1.97”) 135mm (5.31”) Top Front Side Back Bottom Application Diagram ED3341 3 www.EtherWAN.com rev. A3 Ordering Information Model ED3341-00B Hardened 10/100BASE-TX Ethernet Extender Over Coaxial Cable Optional Accessories KP-AA96-480 Panel Mounting Kit MDR-40-48 40W/0.83A DIN-Rail 48VDC Industrial Power Supply (for Terminal Block) DR-30-24 30W/1.5A DIN-Rail 24VDC Industrial Power Supply (for Terminal Block) DR-60-24 60W/2.5A DIN-Rail 24VDC Industrial Power Supply (for Terminal Block) DR-75-24 75W/3.2A DIN-Rail 24VDC Industrial Power Supply (for Terminal Block) DR-120-24 120W/5A DIN-Rail 24VDC Industrial Power Supply (for Terminal Block) 41-136046-X 36W/3A 12VDC Hardened Power Adapter with Open Wire in Aluminum Housing (for Terminal Block) (X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP, 6: SA 41-136044-X 36W/3A 12VDC Hardened Power Adapter with Latched DC Jack in Aluminum Housing (for DC Jack) (X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP, 6: SA ED3341 4 www.EtherWAN.com rev. A3