DOMINANT Opto Technologies Innovating Illumination Power DomiLED TM DATA SHEET: Power DomiLEDTM InGaN White : DWW-LJG TM With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED™ truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. Features: > > > > > > High brightness surface mount LED. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL), > Display: full color display video notice board. > Industry: white goods (eg: Oven, microwave, etc.). > Lighting: architecture lighting, general lighting, garden light, etc © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 01/10/2014 V7.0 DOMINANT TM InGaN White : DWW-LJG Opto Technologies Innovating Illumination Optical Characteristics (Tj=25˚C) Part Ordering Number Color Viewing Total Flux Luminous Intensity @ IF = 30mA IV (mcd) Angle˚ IF=30mA, mlm (typ) Min. Typ. Max. DWW-LJG-W2X-1 White 120 7000 1400.0 2240.0 2850.0 DWW-LJG-XY1-1 White 120 8900 1800.0 2850.0 3550.0 Not for new design NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 4. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. Electrical Characteristics at Tj=25˚C Vf @ If = 30mA Vr @ Ir = 10uA Part Number Min. (V) Typ. (V) Max. (V) DWW-LJG 2.90 3.25 3.60 Min. (V) 5 Forward voltages, Vf is measured with an accuracy of ± 0.1V. Absolute Maximum Ratings Maximum Value Unit DC forward current 50 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.005) 300 mA 5 V ESD threshold (HBM) 2000 V LED junction temperature 125 ˚C Operating temperature -40 … +110 ˚C Storage temperature -40 … +110 ˚C 200 mW 300 K/W 130 K/W Reverse voltage; Ir (max) = 10µA Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 2 01/10/2014 V7.0 DOMINANT DOMINANT TMTM InGaN InGaNWhite White: :DWW-LJG DWW-LJG Opto Technologies Opto Technologies Innovating Illumination Innovating Illumination DWW,White WhiteColor ColorGrouping Grouping DWW, White Structure White BinBin Structure 0.3900 0.3800 0.3700 PL 0.3600 OL PK 0.3500 NL 0.3400 0.3300 ML NK 0.3200 0.3100 MK LL 0.3000 OK LK KL 0.2900 KK JL 0.2800 0.2700 JK 0.2600 0.2500 0.2400 0.2300 0.2700 0.2800 0.2900 0.3000 0.3100 0.3200 0.3300 0.3400 0.3500 0.3600 0.3700 Chromaticitycoordinate coordinategroups groups are are measured measured with with an Chromaticity an accuracy accuracy of of ±±0.01. 0.01. Bin Bin 11 22 33 44 0.2910 0.2910 0.2680 0.2680 0.3005 0.3005 0.2825 0.2825 0.3045 0.3045 0.2715 0.2715 0.2960 0.2960 0.2955 0.2955 0.3005 0.3005 0.2825 0.2825 0.3100 0.3100 0.2970 0.2970 0.3130 0.3130 0.2840 0.2840 0.3070 0.3070 0.3120 0.3120 0.3100 0.3100 0.2970 0.2970 0.3386 0.3386 0.3426 0.3426 0.3386 0.3386 0.3235 0.3235 0.3386 0.3386 0.3591 0.3591 0.3386 0.3386 0.3426 0.3426 0.3484 0.3484 0.3571 0.3571 0.3484 0.3484 0.3388 0.3388 0.3484 0.3484 0.3730 0.3730 0.3484 0.3484 0.3571 0.3571 0.3205 0.3205 0.2956 0.2956 0.3130 0.3130 0.2840 0.2840 0.3197 0.3197 0.3131 0.3131 0.3100 0.3100 0.2970 0.2970 0.3288 0.3288 0.3081 0.3081 0.3205 0.3205 0.2956 0.2956 0.3288 0.3288 0.3282 0.3282 0.3197 0.3197 0.3131 0.3131 0.3582 0.3582 0.3715 0.3715 0.3582 0.3582 0.3542 0.3542 0.3582 0.3582 0.3792 0.3792 0.3582 0.3582 0.3715 0.3715 JKJK Cx Cx Cy Cy 0.2960 0.2960 0.2590 0.2590 JLJL Cx Cx Cy Cy KKKK Cx Cx Cy Cy 0.291 0.291 0.2680 0.2680 0.3045 0.3045 KLKL Cx Cx Cy Cy NK NK Cx Cx Cy Cy NLNL Cx Cx Cy Cy OK OK Cx Cx Cy Cy OLOL Cx Cx Cy Cy LKLK Cx Cx Cy Cy LLLL Cx Cx Cy Cy MK MK Cx Cx Cy Cy ML ML Cx Cx Cy Cy PKPK Cx Cx Cy Cy PLPL Cx Cx Cy Cy 0.2850 0.2850 0.2790 0.2790 0.3005 0.3005 0.2825 0.2825 0.2715 0.2715 0.3005 0.3005 0.2960 0.2960 0.2955 0.2955 0.2825 0.2825 0.3288 0.3288 0.3288 0.3288 0.3282 0.3282 0.3081 0.3081 0.3288 0.3288 0.3288 0.3288 0.3453 0.3453 0.3282 0.3282 0.3386 0.3386 0.3386 0.3386 0.3426 0.3426 0.3235 0.3235 0.3386 0.3386 0.3386 0.3386 0.3591 0.3591 0.3426 0.3426 0.3100 0.3100 0.3197 0.3197 0.3131 0.3131 0.2970 0.2970 0.3070 0.3070 0.3189 0.3189 0.3302 0.3302 0.3120 0.3120 0.3197 0.3197 0.3288 0.3288 0.3282 0.3282 0.3131 0.3131 0.3189 0.3189 0.3288 0.3288 0.3452 0.3452 0.3302 0.3302 0.3484 0.3484 0.3484 0.3484 0.3571 0.3571 0.3388 0.3388 0.3484 0.3484 0.3484 0.3484 0.3730 0.3730 0.3571 0.3571 InGaN wavelength very sensitivetotodrive drivecurrent. current.Operating Operating at at lower lower current current is performance. InGaN wavelength is is very sensitive is not not recommended recommendedand andmay mayyield yieldunpredictable unpredictable performance. Current pulsing should usedfor fordimming dimmingpurposes. purposes. Current pulsing should bebe used 3 3 01/10/2014 V7.0 23/01/2014 V5.0 DOMINANT TM InGaN White : DWW-LJG Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group W2 1400.0 ... 1800.0 X1 1800.0 ... 2240.0 X2 2240.0 ... 2850.0 Y1 2850.0 ... 3550.0 Luminous intensity is measured with an accuracy of ± 11%. 4 01/10/2014 V7.0 DOMINANT DOMINANT Opto Technologies TM TM InGaN DOMINANT InGaNWhite White: :DWW-LJG DWW-LJG TM Opto Technologies Innovating Illumination Opto Technologies Innovating Illumination Innovating Illumination Forward Current Vs Forward Voltage Relative Intensity Vs Forward Current 60 2.5 Relative Intensity; Normalized at 30mA Forward Current, mA Relative Intensity; Normalized at 30mA Relative Intensity Vs Forward Current 2 1.5 1 0.5 0 0 10 20 30 40 50 60 70 80 90 100 2.5 50 2 40 30 1.5 20 1 10 0.5 0 0 2.5 0 Forward Current, mA 3 10 20 3.5 30 40 50 4 60 70 Forward Voltage, V 4.5 80 90 100 Forward Current, mA Relative Intensity Vs Wavelength Forward Current Vs Ambient Temperature 1 0.9 60 50 Relative Relative Intensity Intensity Forward Current; mA Forward Current; mA 60 Forward Current Vs Ambient Temperature 40 30 20 10 0 0 0.8 50 0.7 0.6 40 0.5 30 0.4 0.3 20 0.2 0.1 10 0 300 0 400 10 20 30 40 50 60 70 80 90 100 110 120 0 Ambient Temperature 450 500 550 700 600 650 900 700 750 1100 800 10 20 30 40 50 60 70 80 90 100 110 120 Wavelength, nm Ambient Temperature Radiation Pattern 0.0200 0.02 0.0100 0.015 0.01 0.0050 50° 0.01 0.005 0.0000 0 60° 0 -0.0050 0 0050 -0.015 90° -0.0200 Chromaticity Coordinate Shift 0.8 Cy 40° 0° 0.8 Cy 50° Cx 10° Delta CX Cx 0.6 20° 1.0 Cx Variables Cy 30° Variables Delta CY 0.6 0.4 -0.01 -0.005 70° -0.0100 -0.01 80° -0.0150 Radiation Pattern Shift ( Tj=25° C ) 1.0 0.03 0.0150 40° ΔCX , Δ CY Chromaticity Coordinate Chromaticity Coordinate Shift 20° 10° 0° 30° 60° 0.4 0.2 -0.02 -0.03 00 70° 0 250 40 300 5 50 15 4 20150 3010 3512 0 10 2 100 6 25 8 200 14 45 16 0.2 80° 50 18 20 90° 0 Forward Current Forward current (mA) (mA) Forward current (mA) 5 5 23/01/2014 V5.0 01/10/2014 V7.0 5 DOMINANT TM InGaN White : DWW-LJG Opto Technologies Innovating Illumination Power DomiLED • InGaN White : DWW-LJG Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Resin Soldering Leads Sn-Sn Plating 6 01/10/2014 V7.0 DOMINANT TM Opto Technologies InGaN White : DWW-LJG Opto Technologies Recommended Solder Pad InGaN White : DWW-LJG DOMINANT Innovating Illumination TM Innovating Illumination Recommended Solder Pad 7 01/10/2014 V7.0 7 23/01/2014 V5.0 DOMINANT DOMINANT DOMINANT TM TM TM InGaNWhite White:::DWW-LJG DWW-LJG InGaN White DWW-LJG InGaN OptoTechnologies Technologies Opto Technologies Opto InnovatingIllumination Illumination Innovating Illumination Innovating Tapingand andorientation orientation Taping and orientation Taping Reelscome comein quantityof of2000 2000units. units. Reels come ininquantity quantity of 2000 units. ••• Reels • Reel diameter is 180 mm. Reel diameter diameter is is 180 180 mm. mm. •• Reel 8 88 23/01/2014V5.0 V5.0 23/01/2014 01/10/2014 V7.0 DOMINANT DOMINANT TM TM InGaN White White::DWW-LJG DWW-LJG InGaN Opto Opto Technologies Technologies Innovating Innovating Illumination Illumination Packaging Packaging Specification Specification 99 01/10/2014V5.0 V7.0 23/01/2014 DOMINANT TM InGaN White : DWW-LJG Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Power DomiLED 1 completed bag (2000pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Power DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 192,000 MAX 10 01/10/2014 V7.0 DOMINANT TM InGaN White : DWW-LJG Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 225 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 11 01/10/2014 V7.0 DOMINANT TM InGaN White : DWW-LJG Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 05 Apr 2012 2 Update Thermal Resistance 13 Mar 2013 2 Update Operating Temperature and Storage Temperature 19 Aug 2013 2 Add new partno: DWW-LJG-XY1-1 05 Sep 2013 2 Typo error on Vf 23 Jan 2014 2 Not for new design: DWW-LJG-W2X-1 20 Jun 2014 5 Add Graph: Chromaticity Coordinate Shift 01 Oct 2014 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 12 01/10/2014 V7.0 DOMINANT TM Opto Technologies InGaN White : DWW-LJG Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM