DOMINANT Opto Technologies Innovating Illumination Power DomiLED TM DATA SHEET: Power DomiLEDTM InGaN : DWZB-DZJG-1 TM With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED™ truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. Features: > > > > > > > High brightness surface mount LED. Long lifetime up to 50,000 hours due to silicone encapsulation. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Applications: > Automotive: Interior applications, eg: switches, telematics, climate control system, dashboard, etc. Exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL) > Signage: full colour display video notice board, signage, special effect lighting. > Industrial: white goods (eg: Oven, microwave, etc.), light bar, illuminated advertising. > Lighting: architecture lighting, general lighting, garden light, channel light. © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 14/03/2014 V.2.0 DOMINANT TM InGaN : DWZB-DZJG-1 Opto Technologies Innovating Illumination Optical Characteristics (Tj=25˚C) Part Ordering Number DWZB-DZJG-WX2-1 Viewing Angle˚ Color Ice Blue Luminous Intensity @ 30mA IV (mcd) Min. Typ. Max. 1125.0 120 1800.0 2850.0 NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Other luminous intensity groups may also be available upon request. 3. Luminous intensity is measured with an accuracy of ± 11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 5. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. Electrical Characteristics at Tj=25˚C Part Number Min. (V) Vf @ If = 30mA Typ. (V) Max. (V) DWZB-DZJG 2.80 3.40 3.80 Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V. Absolute Maximum Ratings Maximum Value Unit DC forward current 50 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 300 mA Not designed for reverse bias V ESD threshold (HBM) 4000 V LED junction temperature 125 ˚C Operating temperature -40 … +110 ˚C Storage temperature -40 … +110 ˚C 200 mW 300 K/W 180 K/W Reverse voltage; Ir (max) = 10µA Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 with pad size >= 16 mm2 per pad) 2 14/03/2014 V.2.0 DOMINANT TM InGaN : DWZB-DZJG-1 Opto Technologies Innovating Illumination Characteristics Symbol Part Number Value Unit Temperature coefficient of VF (typ) IF = 30mA; 0 ˚C <= T <= 100 ˚C TCV DWZB-DZJG -6.00 mV / K Temperature coefficient of IV (typ) TCIV DWZB-DZJG -0.22 %/K Temperature coefficient of Cx (typ) IF = 30mA; 0 ˚C <= T <= 100 ˚C TCCx DWZB-DZJG -0.0001 Temperature coefficient of Cy (typ) IF = 30mA; 0 ˚C <= T <= 100 ˚C TCCy DWZB-DZJG -0.0002 IF = 30mA; 0 ˚C <= T <= 100 ˚C 3 14/03/2014 V.2.0 DOMINANT TM InGaN : DWZB-DZJG-1 Opto Technologies Innovating Illumination DWZB, White Color Grouping Color Bin Structure 0.3400 0.3300 0.3200 8L 8K 8J 0.3100 7L 0.3000 7K 7J 0.2900 6L 6K 0.2800 0.2700 5L 5K 6J 5J 0.2600 4L 0.2500 0.2400 4K 3L 3K 4J 3J 0.2300 0.2200 0.2100 0.1500 0.1600 0.1700 0.1800 0.1900 0.2000 0.2100 0.2200 0.2300 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. 1 2 3 4 Cx 0.1862 0.1921 0.1881 0.1823 Cy 0.2437 0.2431 0.2273 0.2280 Cx 0.1775 0.1862 0.1823 0.1735 Cy 0.2447 0.2437 0.2280 0.2289 Cx 0.1716 0.1775 0.1735 0.1677 Cy 0.2453 0.2447 0.2289 0.2296 Cx 0.1902 0.1960 0.1921 0.1862 Cy 0.2595 0.2588 0.2431 0.2437 Cx 0.1814 0.1902 0.1862 0.1775 Cy 0.2605 0.2595 0.2437 0.2447 Cx 0.1756 0.1814 0.1775 0.1716 Cy 0.2611 0.2605 0.2447 0.2454 Cx 0.1941 0.2000 0.1960 0.1902 Cy 0.2753 0.2746 0.2588 0.2595 Cx 0.1853 0.1941 0.1902 0.1814 Cy 0.2762 0.2753 0.2595 0.2605 Cx 0.1795 0.1853 0.1814 0.1756 Cy 0.2769 0.2605 0.2611 Cx 0.1980 X 0.2762 0.2039 0.2000 0.1941 Cy 0.2910 0.2904 0.2746 0.2753 Cx 0.1893 0.1980 0.1941 0.1853 Cy 0.2920 0.2910 0.2753 0.2762 Cx 0.1830 0.1893 0.1853 0.1795 0.2930 0.2920 0.2762 0.2769 Bin 3J 3K 3L 4J 4K 4L 5J 5K 5L 6J 6K 6L Cy 4 14/03/2014 V.2.0 DOMINANT TM InGaN : DWZB-DZJG-1 Opto Technologies Innovating Illumination 1 2 3 4 Cx 0.2020 0.2080 0.2040 0.1980 Cy 0.3070 0.3060 0.2900 0.2910 Cx 0.1930 0.2020 0.1980 0.1893 Cy 0.3080 0.3070 0.2910 0.2920 Cx 0.1870 0.1930 0.1893 0.1830 Cy 0.3080 0.3080 0.2920 0.2930 Cx 0.2060 0.2120 0.2080 0.2020 Cy 0.3230 0.3220 0.3060 0.3070 Cx 0.1970 0.2060 0.2020 0.1930 Cy 0.3240 0.3230 0.3070 0.3080 Cx 0.1910 0.1970 0.1930 0.1870 Cy 0.3240 0.3240 0.3080 0.3080 Bin 7J 7K 7L 8J 8K 8L InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. X 5 14/03/2014 V.2.0 DOMINANT TM InGaN : DWZB-DZJG-1 Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group W1 1125.0...1400.0 W2 1400.0...1800.0 X1 1800.0...2240.0 X2 2240.0...2850.0 Luminous intensity is measured with an accuracy of ± 11%. Vf Bining (Optional) Vf Bin @ 30 mA Forward Voltage (V) V0 2.70 ... 3.00 V1 3.00 ... 3.30 V2 3.30 ... 3.60 Forward Voltage, Vf is measured with an accuracy of ± 0.1 V. Please consult sales and marketing for special part number to incorporate Vf bining. 6 14/03/2014 V.2.0 DOMINANT TM InGaN : DWZB-DZJG-1 Opto Technologies Innovating Illumination Forward Voltage Vs Forward Current Forward Current Vs Forward Voltage 1.6 2.5 4 60 1.4 3.5 2 1.2 50 3 Forward Current, mA Forward Voltage; V Relative RelativeIntensity; Intensity;Normalized Normalizedatat30mA 30mA Relative Intensity Vs Forward Current Relative Intensity Vs Forward Current 1 1.5 0.8 0.6 1 0.4 0.5 0.2 0 0 0 0 10 20 20 40 30 60 40 80 40 2.5 2 30 1.5 20 1 10 0.5 0 0 50 100 0 2.5 10 3 20 3.5 30 4 40 50 4.5 Forward Current, mA Forward Current, mA Forward Current; mA Forward Voltage, V Maximum Current Vs Ambient Temperature Maximum Forward Current Vs Temperature Relative Intensity Vs Wavelength Relative Multiple Intensity VsPlot Wavelength X-Y Temp. Solder Point, Ts 50 50 45 40 40 35 Relative RelativeIntensity Intensity ForwardCurrent, Current, mA mA Forward 60 55 Temp. Ambient, Ta 30 25 20 20 15 10 10 5 0 0 0 10 20 30 40 50 60 70 80 90 100 110 120 0 10 20 30 40 50 60 70 80 90 100 110 Ambient Temperature Temperature 1 1 0.9 0.9 0.9 0.8 0.8 0.8 0.7 0.7 0.7 0.6 0.6 0.6 0.5 0.5 0.5 0.4 0.4 0.4 0.3 0.3 0.3 0.2 0.2 0.2 0.1 0.1 0.1 0 00 Variables Ice Blue 400 350 400 450 500 450 450 500 550 550 550 600 600 650 650 650 700 750 Wavelength, nm Wavelength, Wavelengthnm 700 750 800 Radiation Pattern 30° 20° 10° 0° 1.0 40° 0.8 50° 0.6 60° 0.4 70° 0.2 80° 90° 0 7 14/03/2014 V.2.0 DOMINANT TM InGaN : DWZB-DZJG-1 Opto Technologies Innovating Illumination Power DomiLED • InGaN : DWZB-DZJG-1 Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Resin Soldering Leads Sn Plating 8 14/03/2014 V.2.0 DOMINANT TM InGaN : DWZB-DZJG-1 Opto Technologies Innovating Illumination Recommended Solder Pad 9 14/03/2014 V.2.0 DOMINANT TM InGaN : DWZB-DZJG-1 Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 10 14/03/2014 V.2.0 DOMINANT TM InGaN : DWZB-DZJG-1 Opto Technologies Innovating Illumination Packaging Specification 11 14/03/2014 V.2.0 DOMINANT TM InGaN : DWZB-DZJG-1 Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Power DomiLED 1 completed bag (2000pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Power DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 192,000 MAX 12 14/03/2014 V.2.0 DOMINANT TM InGaN : DWZB-DZJG-1 Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 225 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 13 14/03/2014 V.2.0 DOMINANT TM InGaN : DWZB-DZJG-1 Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 14 Mar 2013 6 Add Vf Binning Option 14 Mar 2014 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 14 14/03/2014 V.2.0 DOMINANT TM Opto Technologies InGaN : DWZB-DZJG-1 Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM