EURO QUARTZ 5 x 3.2mm SMD Clock Oscillator XO53 Series Oscillators 1.0MHz to 125.0MHz FEATURES Page 1 of 2 Miniature 5.0 x 3.2 x 1.2mm package, small footprint Frequency Range 156kHz to 160MHz Tristate function standard Supply voltage 1.0, 1.2, 1.5, 1.8, 2.5, 3.3 or 5.0 Volts DESCRIPTION The XO53 microminiature oscillators are a small footprint oscillator and fully specified. The oscillator is available with supply voltage of 1.0, 1.2, 1.5, 1.8, 2.5, 3.3 or 5.0 Volts. OUTLINE & DIMENSIONS SPECIFICATION Frequency Range: Supply Voltage: Output Logic: Frequency Stability over Temperature Range 0° to +50°C: -10° to +70°C: -55° to +125°C: Rise/Fall Time: 156kHz to 160MHz 1.0, 1.2, 1.5, 1.8, 2.5, 3.3 or 5.0 Volts LSTTL/HCMOS from ±10ppm from ±15ppm from ±25ppm 10ns max. (10% to 90%Vdd) (frequency dependant) Output Voltage: HIGH ‘1’: 90%Vdd minimum ( ) LOW ‘0’: 10%Vdd maximum ( ) Output Load CMOS: 15pF (50pF available for 3.3V supply) TTL: 10 LSTTL loads Duty Cycle: 50%±5% typical Supply Current: Startup Time 156kHz to 32MHz: 5ms max. 32MHz+ to 125MHz: 10ms max. Ageing: ±5ppm max. per year Phase Jitter RMS: 10ps typical Enable Time: 100ms max. Disable Time: 100ns max. Tristate Function (Pad 1): Output (Pad 3) is active if Pad 1 is not connected or a voltage of 2.2V or greater is applied to Pad 1. Output is high impedance when a voltage of 0.8V or lower is applied to Pad 1. RoHS Status: RoHS Compliant and pB free SOLDER TEMPERATURE PROFILE EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk EURO QUARTZ XO53 Series Oscillators 156kHz to 160MHz 5 x 3.2mm SMD Clock Oscillator Page 2 of 2 SUPPLY VOLTAGE-DEPENDENT PARAMETERS Supply Voltage Frequency Range Logic HIGH '1' (90%Vdd min.) Logic LOW '0' (90% Vdd max.) Current Consumption Rise Time/ Fall Time +1.0VDC±5% Code = 'F' 312kHz~ 60MHz +1.2VDC±5% Code = 'E' 312kHz~ 60MHz +1.5VDC±5% Code = 'D' 312kHz~ 60MHz +1.8VDC±5% Code = 'C' 156kHz~ 160MHz +2.5VDC±5% Code = 'B' 156kHz~ 160MHz +3.3VDC±5% Code = 'A' 156kHz~ 160MHz +5.0VDC±10% Code = '_' 156kHz~ 160MHz 0.90V min. 1.08V min. 1.35V.min 1.62V min. 2.25V min. 2.97V min. 4.5V min. 0.10V max 0.12V max 0.15V max. 0.18V max. 0.25V max. 0.33V max. 0.5V max. [0.3~1.5MHz] 4mA max. [1.5~20MHz] 4mA max [20.1~50MHz] 4mA max. [50.1~60MHz] 12mA max. 6ns max. [0.3~1.5MHz] [0.3~1.5MHz] [1.0~1.5MHz] [0.3~1.5MHz] [0.5~1.5MHz] 4mA max. 4mA max. 5mA max. 5mA max. 5mA max. [1.5~20MHz] [1.5~20MHz] [1.5~20MHz] [1.5~20MHz] [1.5~20MHz] 4mA max. 4mA max. 8mA max. 8mA max. 8mA max. [20.1~50MHz] [20.1~50MHz] [20.1~50MHz] [20.1~50MHz] [20.1~50MHz] 4mA max. 4mA max. 15mA max. 15mA max. 15mA max. [50.1~60MHz] [50.1~60MHz] [50.1~160MHz] [50.1~160MHz] [50.1~75MHz] 12mA max. 12mA max. 22mA max. 25mA max. 35mA max. 6ns max. 6ns max. 7ns max. 7ns max. 10ns max. Measured between 10% ~ 90% of wave form (CL = 15pF) [0.5~1.5MHz] 5mA max. [1.5~20MHz] 8mA max. [20.1~50MHz] 15mA max. [50.1~75MHz] 35mA max. 10ns max. PART NUMBERING ENVIRONMENTAL PERFORMANCE SPECIFICATION RoHS Status: Storage Temperature Range: Humidity: Hermetic Seal: Solderability: Reflow: Vibration: Shock: Compliant -55° to +105°C 85% RH, 85°C for 48 hours Leak rate 2x10-8 ATM -cm3/s max. MIL-STD-202F Method 208E 248°C max. (see diagram) MIL-STD-202F Method 204, 35±5 mins, 50 to 2000Hz MIL-STD-202F Method 213B, test Condition E, 50g 11ms. Example: 27.000MHz XO53050UCTA Frequency Series Designation XO53 Stability* 100 = ±100ppm 050 = ±50ppm 025 = ±25ppm Output CMOS/LSTTL Operating Temp. Range C = Commercial (-10°~70°C) I = Industrial (-40°~+85°C) M = Military (±100ppm -55°~+105°C) Tristate Function Supply Voltage Blank = 5.0 Volts A = 3.3 Volts B = 2.5 Volts C = 1.8 Volts D = 1.5 Volts E = 1.2 Volts F = 1.0 Volts EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk