EURO QUARTZ LXOAT OSCILLATORS Low Power Crystal Oscillator 312kHz to 120MHz FEATURES Industry-standard full size DIP for compatibility Low ageing Double hermetically sealed package Full MILITARY testing available Choice of 5.0V or 3.3V supply voltage Optional Enable/Disable or Tristate function OUTLINE & DIMENSIONS DESCRIPTION The LXOAT oscillator is designed as a highly reliable crystal oscillator able to withstand use in sever environments. The double hermetically sealed package provides a permanently precise control of ouput frequency. SPECIFICATION Supply Voltage: Calibration Tolerance: Frequency Stability 0° to +50°C: -10° to +70°C: -40° to +85°C: -55° to +125°C: Supply Current: Output Levels 5.0V (CMOS) VOL: VOH: Start-up Time: Rise/Fall Time: Duty Cycle: Ageing first year: Shock Survival: Vibration Survival: Operating Temperature Ranges Commercial (C): Industrial (I): Military (M): +5.0V±5% or +3.3V±5% ±0.01% (±100ppm) from ±5 to ±30ppm from ±10 to ±50ppm from ±20 to ±100ppm from ±30 to ±100ppm from 4mA to 60mA (frequency dependent) 0.5V max. 4.5V max. 5ms max. 6ns typical, 10ns maximum 60/40% ±10ppm max. 1,000g peak 1.0ms, ½ sine 10g rms 10~2000Hz random The LXOAT oscillator has these pin options available: 'E' (Enable), when pin 1 is LOW (0), the oscillator stops oscillating. 'T' (Tri-state), when pin 1 is LOW, the oscillator continues to run, hoever, the output buffer amplifier stops functioning and output is in a high impedance (Z) state. ENABLE vs TRI-STATE -10° to +70°C -40° to +85°C -55° to +125°C Current consumption when Pin 1 is low Output recovery delay when Pin 1 changes from low to high ABSOLUTE MAXIMUM RATINGS Supply Voltage: Storage Temperature: ENABLE/DISABLE OPTIONS (E/T/N) Enable Tri-State Low High Delayed Immediate -0.3V to +7.0V -55° to +125°C PACKAGING LXOAT oscillators are supplied tube packed. HOW TO ORDER LXOAT OSCILLATORS LXOAT S S if special or custom design (Blank if standard) T 32MHz E = Enable T = Tri-state N = Neither Frequency 100 Calibration Tolerance at 25°C (ppm) / 100 / Total Frequency Tolerance (±ppm) Frequency Stability over temperature range (in ±ppm) ALTERNATIVELY -- / -- - / 200 Total Frequency Tolerance (±ppm) / M Temp. Range C = Commercial I = Industrial M = Military S = Specify / M Temp. Range C = Commercial I = Industrial M = Military S = Specify EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk