A Business Partner of Renesas Electronics Corporation. NE5550279A Data Sheet R09DS0033EJ0200 Rev.2.00 Jul 04, 2012 Silicon Power LDMOS FET FEATURES • • • • • High Output Power : Pout = 33.0 dBm TYP. (VDS = 7.5 V, IDset = 40 mA, f = 460 MHz, Pin = 15 dBm) High power added efficiency : ηadd = 68% TYP. (VDS = 7.5 V, IDset = 40 mA, f = 460 MHz, Pin = 15 dBm) High Linear gain : GL = 22.5 dB TYP. (VDS = 7.5 V, IDset = 40 mA, f = 460 MHz, Pin = 0 dBm) High ESD tolerance Suitable for VHF to UHF-BAND Class-AB power amplifier. APPLICATIONS • • • 150 MHz Band Radio System 460 MHz Band Radio System 900 MHz Band Radio System ORDERING INFORMATION Part Number NE5550279A Order Number NE5550279A-A NE5550279A-T1 NE5550279A-T1-A Package 79A (Pb Free) Marking W7 Supplying Form • 12 mm wide embossed taping • Gate pin faces the perforation side of the tape 12 mm wide embossed taping Gate pin faces the perforation side of the tape Qty 1 kpcs/reel NE5550279A-T1A NE5550279A-T1A-A 12 mm wide embossed taping Gate pin faces the perforation side of the tape Qty 5 kpcs/reel Remark To order evaluation samples, please contact your nearby sales office. Part number for sample order: NE5550279A-A • • • • • • ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Operation in excess of any one of these parameters may result in permanent damage. Parameter Drain to Source Voltage Gate to Source Voltage Drain Current Drain Current (50% Duty Pulsed) Total Power Dissipation Note Channel Temperature Storage Temperature Note: Value at TC = 25°C Symbol VDS VGS IDS IDS-pulse Ratings 30 6.0 0.6 1.2 Unit V V A A Ptot Tch Tstg 6.25 150 −55 to +150 W °C °C CAUTION Observe precautions when handling because these devices are sensitive to electrostatic discharge. The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. R09DS0033EJ0200 Rev.2.00 Jul 04, 2012 Page 1 of 7 A Business Partner of Renesas Electronics Corporation. NE5550279A RECOMMENDED OPERATING RANGE (TA = 25°C) Parameter Drain to Source Voltage Gate to Source Voltage Drain Current Input Power Symbol VDS VGS IDS Pin Test Conditions f = 460 MHz, VDS = 7.5 V MIN. − 1.65 − − TYP. 7.5 2.20 0.4 15 MAX. 9.0 2.85 − 20 Unit V V A dBm ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) <R> Parameter DC Characteristics Gate to Source Leakage Current Drain to Source Leakage Current (Zero Gate Voltage Drain Current) Gate Threshold Voltage Drain to Source Breakdown Voltage Transconductance Thermal Resistance RF Characteristics Output Power Drain Current Power Drain Efficiency Power Added Efficiency Linear Gain Symbol IGSS IDSS Vth BVDSS Gm Rth Pout IDS ηd ηadd GL Note Test Conditions MIN. TYP. MAX. Unit − − − − 100 10 nA μA VDS = 7.5 V, IDS = 1.0 mA IDS = 10 μA VDS = 7.5 V, IDS = 140±20 mA Channel to Case 1.15 25 0.36 − 1.65 38 0.44 20.0 2.25 − 0.58 − V V S °C/W f = 460 MHz, VDS = 7.5 V, Pin = 15 dBm, IDset = 40 mA (RF OFF) 31.5 − − − − 33.0 0.38 70 68 22.5 − − − − − dBm A % % dB VGS = 6.0 V VDS = 25 V Note: Pin = 0 dBm Remark DC performance is 100% testing. RF performance is testing several samples per wafer. Wafer rejection criteria for standard devices is 1 reject for several samples. R09DS0033EJ0200 Rev.2.00 Jul 04, 2012 Page 2 of 7 A Business Partner of Renesas Electronics Corporation. NE5550279A TEST CIRCUIT SCHEMATIC FOR 460 MHz VGS VDS R1 C1 L1 C1 IN 50 Ω OUT C10 L2 C11 C12 L3 L4 FET NE5550279A C14 C13 C22 C20 50 Ω C21 COMPONENTS OF TEST CIRCUIT FOR MEASURING ELECTRICAL CHARACTERISTICS Symbol C1 C10 C11 Value 1 μF 22 pF 1.2 pF Type GRM188B31C105KA92 GRM1882C1H220JA01 ATC100A1R2JW Maker Murata Murata C12 4.7 pF ATC100A4R7BW American Technical Ceramics C13 15 pF ATC100A150BW American Technical Ceramics C14 12 pF ATC100A120BW American Technical Ceramics C20 10 pF ATC100A100JW American Technical Ceramics C21 3.9 pF ATC100A3R9BW American Technical Ceramics C22 100 pF ATC100A101JW R1 2 kΩ American Technical Ceramics KOA L1 L2 L3 123 nH 10 nH 9.8 nH L4 PCB SMA Connecter 20 nH − − American Technical Ceramics 1/10 W Chip Resistor RK73B1JTTD202J φ 0.5 mm, φ D = 3 mm, 10 Turns LQW18AN10NG00 φ 0.4 mm, φ D = 1.6 mm, 3 Turns Ohesangyou Murata Ohesangyou φ 0.5 mm, φ D = 3 mm, 2 Turns R4775, t = 0.4 mm, εr = 4.5, size = 30 × 48 mm WAKA 01K0790-20 Ohesangyou Panasonic WAKA COMPONENT LAYOUT OF TEST CIRCUIT FOR 460 MHz C1 C1 C12 C10 C11 R09DS0033EJ0200 Rev.2.00 Jul 04, 2012 L2 C13 R1 C14 L1 C21 C20 L4 C22 L3 Page 3 of 7 A Business Partner of Renesas Electronics Corporation. NE5550279A TYPICAL CHARACTERISTICS 1 (TA = 25°C) R: f = 460 MHz, VDS = 3.6/4.5/6/7.5/9 V, IDset = 40 mA, Pin = −10 to 20 dBm IM: f1 = 460 MHz, f2 = 461 MHz, VDS = 3.6/4.5/6/7.5/9 V, IDset = 40 mA, Pout (2 tone) = 8 to 32 dBm POWER GAIN, POWER ADDED EFFICIENCY vs. INPUT POWER Output Power Pout (dBm) 30 25 0.9 0.8 30 0.7 20 0.6 15 0.5 10 0.4 5 0.3 0 0.2 –5 0.1 –10 –15 –10 –5 0 5 10 15 20 25 15 30 10 20 5 10 –10 3rd/5th Order Intermodulation Distortion IM3/IM5 (dBc) 2f0 - 3.6 V 2f0 - 4.5 V 2f0 - 6.0 V 2f0 - 7.5 V 2f0 - 9.0 V 2nd Harmonics 2f0 (dBc) 3rd Harmonics 3f0 (dBc) –30 –50 3f0 - 3.6 V 3f0 - 4.5 V 3f0 - 6.0 V 3f0 - 7.5 V 3f0 - 9.0 V –60 –70 5 10 15 20 25 30 –5 0 5 10 15 0 25 20 IM3/IM5 vs. 2 TONES OUTPUT POWER 0 –20 –40 50 Input Power Pin (dBm) 2f0, 3f0 vs. OUTPUT POWER –10 60 40 Input Power Pin (dBm) 0 70 20 0 –15 0 25 80 Gp - 3.6 V Gp - 4.5 V Gp - 6.0 V Gp - 7.5 V Gp - 9.0 V D add - 3.6 V D add - 4.5 V D add - 6.0 V D add - 7.5 V D add - 9.0 V 35 Power Gain GP (dB) 35 40 1 Pout - 3.6 V Pout - 4.5 V Pout - 6.0 V Pout - 7.5 V Pout - 9.0 V IDS - 3.6 V IDS - 4.5 V IDS - 6.0 V IDS - 7.5 V IDS - 9.0 V Drain Current IDS (A) 40 Power Added Efficiency η add (%) OUTPUT POWER, DRAIN CURRENT vs. INPUT POWER 35 40 Output Power Pout (dBm) IM3 - 3.6 V IM3 - 4.5 V IM3 - 6.0 V IM3 - 7.5 V IM3 - 9.0 V IM5 - 3.6 V IM5 - 4.5 V IM5 - 6.0 V IM5 - 7.5 V IM5 - 9.0 V –10 –20 –30 –40 –50 –60 –70 5 10 15 20 25 30 35 2 Tones Output Power Pout (2 tone) (dBm) Remark The graphs indicate nominal characteristics. R09DS0033EJ0200 Rev.2.00 Jul 04, 2012 Page 4 of 7 A Business Partner of Renesas Electronics Corporation. NE5550279A S-PARAMETERS S-parameters and noise parameters are provided on our web site in a form (S2P) that enables direct import of the parameters to microwave circuit simulators without the need for keyboard inputs. Click here to download S-parameters. [Products] → [RF Devices] → [Device Parameters] URL http://www.renesas.com/products/microwave/ R09DS0033EJ0200 Rev.2.00 Jul 04, 2012 Page 5 of 7 A Business Partner of Renesas Electronics Corporation. NE5550279A PACKAGE DIMENSIONS 79A (UNIT: mm) 1.0 MAX. 0.8±0.15 W Drain Gate Drain 0.4±0.15 1.2 MAX. Source 4.4 MAX. Source 27001 1.5±0.2 7 Gate 0.6±0.15 5.7 MAX. (Bottom View) 4.2 MAX. 0.8 MAX. 5.7 MAX. 0.9±0.2 0.2±0.1 3.6±0.2 79A PACKAGE RECOMMENDED P.C.B. LAYOUT (UNIT: mm) 4.0 1.7 Source Stop up the hole with a rosin or something to avoid solder flow. Drain 1.2 0.5 1.0 5.9 Gate Through Hole: φ 0.2 × 33 0.5 0.5 6.1 R09DS0033EJ0200 Rev.2.00 Jul 04, 2012 Page 6 of 7 A Business Partner of Renesas Electronics Corporation. NE5550279A RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220°C or higher Preheating time at 120 to 180°C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) : 260°C or below : 10 seconds or less : 60 seconds or less : 120±30 seconds : 3 times : 0.2% (Wt.) or below Condition Symbol IR260 Wave Soldering Peak temperature (molten solder temperature) : 260°C or below Time at peak temperature : 10 seconds or less Preheating temperature (package surface temperature) : 120°C or below Maximum number of flow processes : 1 time Maximum chlorine content of rosin flux (% mass) : 0.2% (Wt.) or below WS260 Partial Heating Peak temperature (terminal temperature) : 350°C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2% (Wt.) or below HS350 CAUTION Do not use different soldering methods together (except for partial heating). R09DS0033EJ0200 Rev.2.00 Jul 04, 2012 Page 7 of 7 Revision History Rev. Date NE5550279A Data Sheet Description Summary Page 1.00 Mar 28, 2012 − 2.00 Jul 04, 2012 p.2 First edition issued Modification of ELECTRICAL CHARACTERISTICS All trademarks and registered trademarks are the property of their respective owners. C-1 NOTICE 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. California Eastern Laboratories and Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. California Eastern Laboratories has used reasonable care in preparing the information included in this document, but California Eastern Laboratories does not warrant that such information is error free. California Eastern Laboratories and Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 3. California Eastern Laboratories and Renesas Electronics do not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of California Eastern Laboratories or Renesas Electronics or others. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. 5. Renesas Electronics products are classified according to the following two quality grades: “Standard” and “High Quality”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. “Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. California Eastern Laboratories and Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by California Eastern Laboratories or Renesas Electronics. 6. You should use the Renesas Electronics products described in this document within the range specified by California Eastern Laboratories, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. California Eastern Laboratories shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. Please contact a California Eastern Laboratories sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. California Eastern Laboratories and Renesas Electronics assume no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. It is the responsibility of the buyer or distributor of California Eastern Laboratories, who distributes, disposes of, or otherwise places the Renesas Electronics product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. 11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of California Eastern Laboratories. 12. Please contact a California Eastern Laboratories sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. NOTE 1: “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. NOTE 2: “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics. NOTE 3: Products and product information are subject to change without notice. CEL Headquarters • 4590 Patrick Henry Drive, Santa Clara, CA 95054 • Phone (408) 919-2500 • www.cel.com For a complete list of sales offices, representatives and distributors, Please visit our website: www.cel.com/contactus