A Business Partner of Renesas Electronics Corporation. OPTOCOUPLERS + S O L I D S TAT E R E L AY S Product Selection Guide www.cel.com 2015 - 2016 California Eastern Laboratories (CEL) is the exclusive sales and marketing partner in the Americas for Compound Semiconductor Devices from Renesas Electronics Corporation, formerly NEC Electronics Corporation. These products include RF components and RFICs, optocouplers, solid state relays, and laser diodes and photo detectors. Renesas Electronics optocouplers and solid state relays are used in a wide variety of markets including Consumer Electronics, Industrial, Power Supply, Also available: Test & Measurement, Datacomm, Lighting Control, Our Application Based Optocoupler Design Guide, Light Durable Goods and more. With over 50 years experience in customer support and fulfillment, CEL is ideally positioned to provide its customers with solutions tailored to meet their specific needs. CEL maintains extensive inventories and provides engineering and applications assistance at its technical centers in Santa Clara, CA and Wauconda, IL. The company supports customers through sales offices, sales representatives and distributors in numerous locations. CEL Headquarters 4590 Patrick Henry Drive Santa Clara, CA 95054 Tel: (408) 919-2500 www.cel.com the most comprehensive tool for selecting the right Optocoupler to use in our focus applications. We have made selecting the right optocoupler as easy as 1-2-3. Download your copy at www.cel.com/Optocouplers Contents Optocouplers Solid State Relays - SSRs Optocoupler Family Overview and Part Numbering system 5 Transistor Output, IC Output Motor Drive Overview 6 Recommended Optocouplers by Application 7 High Speed Digital Optocouplers 9 Digital Optocouplers for IGBT and MOSFET Motor Drive Applications 11-12 Digital High Functionality Optocouplers for Motor Drive Applications 12-13 Isolation Amplifiers, Digital Isolation Amplifiers, Analog 13 14-15 Solid State Relays — Introduction 31 Why Switch from EMRs to SSRs? 31 Package Styles and Safety Certifications 32 SSR Families 32 SSR Part Numbering System 33 Product Lineup 34 SSRs for Power & Industrial Applications single channel, 1500 V r.m.s. isolation voltage 35 dual channel, 1500 V r.m.s. isolation voltage 35 single channel, 1750 V r.m.s. isolation voltage 35 SSRs for Telecom Applications HIgh Speed Analog Optocouplers single channel, 400 V breakdown voltage 36 Single Transistor Optocouplers dual channel, 400 V breakdown voltage 36 DC, general purpose 15-16 AC, general purpose 16 Single Transistor Optocouplers, DC & AC Characterized for Low Input Current (1mA) 17-18 SSRs for ATE & Instrumentation single channel, 500 V r.m.s. isolation voltage SSR Package Dimension Single Transistor Optocouplers, 0.4mm insulation DC, high isolation voltage 19 AC, high isolation voltage 20 Single Transistor Optocouplers, High Performance DC, devices 20 Single Transistor Optocouplers in Mini-Quad Packages 21 Darlington Transistor Optocouplers 22 Darlington Transistor Optocouplers, 0.4mm insulation 23 Darlington Transistor Optocouplers, High VCEO, DC 23 Optocoupler Package Dimensions Mounting Pad Dimensions for Optocouplers & Solid State Relays 24-28 29 All information included in this document is current as of the printed date on back. Information is subject to change without notice. Please refer to datasheets or contact your local CEL representative. For information visit www.cel.com/optocouplers 37 37 Optocouplers Optocoupler Families Overview, Package Styles and Part Numbering System Part Number Description Package Styles Available Package Drawing Page PS23XX Series Transistor Output 4 pin LSOP (2.54mm pin pitch) 24 PS25XX Series Transistor Output 4 and 16 pin DIP and DIP SMT 23-25 PS27XX Series Transistor Output 4 pin SOP (2.54mm pin pitch) 25 PS28XX Series Transistor Output 4,12 and 16 pin SSOP (1.27mm pin pitch) 25-26 PS29XX Series Transistor Output 4 pin Mini Flat (flat lead, 1.27mm pin pitch) 26 PS81XX Series High Speed Analog 5 pin SOP (1.27mm pin pitch) 26 PS83XX Series High Speed Analog 6 pin SDIP SMT 27 PS85XX Series High Speed Analog 8 pin DIP and SMT DIP 24 PS88XX Series High Speed Analog SO8 26 PS91XX Series High Speed Digital 5 pin SOP (1.27mm pin pitch) 26 PS92XX Series High Speed Digital 5 pin SOP (1.27mm pin pitch) 26 PS93XX Series High Speed Digital 6 pin SDIP SMT 27 PS94XX Series High Speed Digital 16 pin SSOP 26 PS95XX Series High Speed Digital 8 pin DIP and SMT DIP 24 PS98XX Series High Speed Digital SO8 26 PS99XX Series High Speed Digital 8-pin LSDIP 27 Channels Configuration Indentifier 1 One Channel 2 Two Channel 4 Four Channel CTR Rank This is intended to explain existing part numbers and is not to be used to create part numbers since not all combinations are available. Blank Standard Part Pb-Free A or C Alternate Die Version A SnBi Plating D High Temperature Version AX NiPdAu Plating Package Style Tape & Reel Options Blank Thru-Hole DIP, SOP, SSOP or Renesas Mini Flat E3 Small Reel L SMT DIP F3 Large Reel L1 Thru-Hole DIP, Gull Wing* L2,L3,L4 SMT DIP Gull Wing* (see package drawings) For details, download: http://www.cel.com/pdf/misc/tape_reel.pdf *8mm Creepage versions available for selected parts. For information visit www.cel.com/optocouplers 5 Transistor Output Series Function Input Output 4-Pin DIP, 5KV iso SOP, 3.75KV iso Small SOP, 2.5 KV iso 4-Pin flat lead, 2.5 KV iso 12-Pin SSOP, 1.5 KV iso DC Single PS2501 PS2381 (Long Creepage, 5KV iso) PS2801C PS2911 PS2841 DC Single PS2514 PS2701A PS2811 PS2913 - DC Single PS2561x PS2703 PS2815 – - DC Single - PS2711 PS2861B (3.75KV iso) – - DC Single - PS2761B – – - DC Single - – – – - DC Darlington PS25x2 PS2702 PS2802 – - DC Darlington PS253x PS2733 ( 2.5KV iso ) PS2833 - - AC Single PS25x5 PS2705A PS2805C PS2915 PS2845 AC Single - PS2715 PS2815 – - AC Darlington PS2506 - - - IC Output Function Category Speed Output 8-Pin DIP 8mm Creepage, 5KV iso High-Speed 1Mbps Analog PS8501 PS8101 PS8302L (TA = 110°C) – - High-Speed 1Mbps Analog PS8502 – - – - High-Speed 1Mbps Digital PS9513 PS9113 - PS9822-1/-2 - High-Speed 1Mbps Digital – PS9122 PS9313L (TA = 110°C) – - High-Speed 1Mbps Digital – - – – - High-Speed 10Mbps Digital PS9587 PS9117A / PS9124 PS9317 / PS9324L PS9817A-1/-2 PS9924 High-Speed 15Mbps Digital – PS9121 - PS9821-1/-2 - High-Speed 15Mbps CMOS – PS9151 PS9351L PS9851-1/-2 - High-Speed 15Mbps Totem Pole Output – PS9123 PS9303L (Active High) – - Analog PS8551L4 / PS8551AL4 – – – - Digital PS9551AL4 – – – - Isolation Amplifier 5-Pin SOP, 3.75 KV iso 6-Pin SDIP, 8mm Creepage, 5KV iso 8-Pin Small SOP, 2.5 KV iso 8-Pin LSDIP, 7.5 KV iso Motor Drive 6 8-Pin LSDIP, 14.5mm Creepage – – PS9313L (TA=110°C) – – – PS9306L/PS9307AL – – – – PS9308L PS9332L – PS9531 – PS9331L - PS9905 5-Pin SOP PS9513 PS9113 – – 0.6A PS9506 2.0A 2.5A Motor Drive (Inverter) Isolated Gate Driver 8-Pin SDIP, 8mm Creepage 8-Pin DIP, 8mm Creepage Function 6-Pin SDIP, 8mm Creepage PS9303L (Active high) PS9309L (Active high) 16-Pin SSOP PS9402 For information visit www.cel.com/optocouplers Recommended Optocouplers by Application RS422/485 Interface Isolation The RS485 serial communications standard is commonly used in data acquisition applications. The standard supports 32 drivers and receivers in a 2- or 4-wire differential configuration with cable lengths up to 4000 feet. Galvanic isolation becomes critical in the prevention of ground loops, electrical noise, and power spikes in widely distributed systems. Application Requirements • Wide range of data transfer rates: 1 Mbps to 15 Mbps • High Common Mode Rejection Ratio (CMRR) • Compact size •Repeatability •Reliability Recommended Renesas Optocouplers Tx/Rx Input / Output: PS8302L, PS9122, PS9313L, PS9822-1, 2 (1 Mbps) PS9124, PS9817A-1, 2, PS9324L, PS9587 (10 Mbps) PS9121, PS9821-1, 2, PS9151, PS9351L, PS9851-1,2 (15 Mbps) CAN Interface Isolation Controller Area Network (CAN) is a serial communications bus popular in industrial applications. Point-to-point and multi-point systems use it to coordinate and synchronize events. Isolation is required in these distributed systems to protect against over-voltage transients, prevent ground loops, and reduce signal distortion. Application Requirements • Accurate signal timing • High Common Mode Rejection Ratio (CMRR) • Compact size •Repeatability •Reliability Recommended Renesas Optocouplers PS9151, PS9123, PS9351L, PS9851-1, 2, PS9121 USB 2.0 Interface Isolation USB is an inexpensive, high speed bus-integration interface used in computer-based systems. While the USB standard does not mandate isolation, designers recognize its importance in critical systems. Isolation protects USB interfaces from electrostatic discharge (ESD), ground loops, common mode noise, and EMI interference. Application Requirements • High CMRR • Compact Size • Low power consumption • Data Transfer Rates: up to 15 Mbps •Reliability Recommended Renesas Optocouplers PS9121, PS9123, PS9124, PS9151, PS9351L, PS9821-1, 2, PS9851-1, 2 For information visit www.cel.com/optocouplers 7 Recommended Optocouplers by Application Motor Drive Control Isolation Motor controllers combine low level logic with high voltage, high power electronics like Intelligent Power Modules (IPM). Isolation enables communication between the controllers and the drivers at both the high and low side power modules. Faults and other events are typically transferred across this isolation barrier as well. Application Requirements • • • • Fast response time: <0.8µs High Common Mode Rejection Ratio (CMRR): >10kV/µs Isolation: typically 2500V AC - 5000V AC Long creepage: up to 8mm Recommended Renesas Optocouplers PS9113, PS9513, PS9506, PS9402, PS9905, PS9303L, PS9306L, PS9307AL, PS9308L, PS9309L, PS9313L, PS9331L, PS9332L, PS9531 Power Supply Isolation Power supplies are used in a wide variety of applications. Galvanic isolation is required for safety and to allow independent secondary side isolation. High speed optocouplers are used to transfer gate drive and synchronous rectification signals from the controller to the switching elements. Application Requirements • High temperature: up to 110°C • Fast response time • Low power consumption • Compact size •Repeatability Recommended Renesas Optocouplers Sync: PS8501, PS8101, PS8302L Feedback: PS2381, PS2561D, PS2761B, PS2861B (Transistor Optocouplers) 802.3af Power over Ethernet (PoE) PoE offers a simple, reliable, cost effective solution for power transmission. It can deliver 13W of power over existing Ethernet cabling in applications ranging from industrial IT to home office networks. To ensure safety, the 802.3af standard requires 1500V AC of galvanic isolation between the main switch circuitry and the Media Dependent Interface (RJ-45 terminal). The communication from the switch to the PSE chip occurs over an isolated I2C bus. Application Requirements • • • • • • • 3.3V and 5V operation 1500VAC minimum isolation Small size Standard Mode (100 Kbps data rate) Fast Mode (400 Kbps data rate) Fast Mode + (1Mbps) High Speed (3.4 Mbps) Recommended Renesas Optocouplers PS9122 (Standard Mode) PS9121, PS9122 (Fast Mode) PS9121, PS9821-1, 2, PS9123 (High Speed) PS9122, PS9822 (Fast Mode +) PS2841-4, PS2911 (Transistor Optocouplers) 8 For information visit www.cel.com/optocouplers High Speed Digital Optocouplers Package Part Number Speed (Mpbs) Vcc Range (V) Recommended Absolute Max Rating BV (Vr.m.s.) IO (mA) IF (mA) Typical tPHL (ns) tPLH (ns) Safety Certification1 Isolation for measurement equipment, plasma display panels and factory automation equipment Single channel, open collector output SOP5 PS9117A 10 4.5 to 5.5 3750 25 30 40 45 UL, VDE ,CSA SOP5 PS9121 15 2.7 to 3.6 3750 25 30 40 45 UL, VDE, CSA SOP52 PS9122 1 3750 20 25 500 max 700 max UL, VDE SOP5 PS9124 10 3750 25 25 40 45 UL, CSA, VDE N = 2.7 to 3.6 L = 4.5 to 5.5 3.3 to 5.0 Single channel, CMOS output, -40 to 100°C operation Isolation for measurement equipment, plasma display panels and factory automation equipment PS9351L SOP5 PS9151 SDIP6 Gull Wing PS9351L SDIP6 8mm Creepage PS9351L2 PS9123 15 4.5 to 5.5 3750 2 20 35 35 UL, VDE 15 4.5 to 5.5 5000 2 25 30 35 UL, CSA, VDE Single channel, totem pole output, -40 to 100°C operation SDIP6 Gull Wing PS9303L SDIP6 8mm Creepage PS9303L2 SOP5 PS9123 Isolation for IPM Drives, Inverters 1 4.5 to 20 5000 25 20 185 240 UL, CSA, VDE 15 4.5 to 5.5 3750 13 20 28 32 UL, CSA, VDE Isolation for measurement equipment, plasma display panels and factory automation equipment Single channel, open collector output SDIP6 Gull Wing PS9317L SDIP6 8mm Creepage PS9317L2 SDIP6 Gull Wing PS9324L SDIP6 8mm Creepage PS9324L2 10 4.5 to 5.5 5000 25 30 40 35 UL, CSA, VDE 10 2.7 to 5.5 5000 25 25 40 50 UL ,CSA, SEMKO, VDE NOTES: 1. Other safety certifications available, see data sheet. 2. –40 to 100°C operation. For information visit www.cel.com/optocouplers Continued next page 9 High Speed Digital Optocouplers Continued... Package Part Number Speed (Mpbs) Vcc Range (V) Recommended Absolute Max Rating BV (Vr.m.s.) IO (mA) DIP8 Thru-Hole 8mm Creepage tPHL (ns) tPLH (ns) Safety Certification1 Isolation for measurement equipment, plasma display panels and factory automation equipment Single channel, open collector output DIP8 Thru-Hole IF (mA) Typical PS9587 PS9587L1 10 4.5 to 5.5 5000 25 30 35 45 UL, VDE, CSA, BSI, SEMKO, NEMKO, DEMKO, FIMKO SMT DIP8 8mm Creepage PS9587L2 SMT DIP8 Gull Wing PS9587L3 SO8 PS9817A-1 10 4.5 to 5.5 2500 25 20 40 45 UL, VDE SO8 PS9821-1 15 2.7 to 3.6 2500 25 20 45 50 UL, VDE SO8 PS9822-1 1 N = 2.7 to 3.6 L = 4.5 to 5.5 2500 25 20 500 max 700 max UL, VDE 8pin LSDIP PS9924 10 2.7 to 5.5 7500 25 25 45 40 UL, CSA, SEMKO, VDE Isolation for measurement equipment, plasma display panels and factory automation equipment Two channel, open collector output SO8 PS9817A-2 10 4.5 to 5.5 2500 25 15 40 45 UL, VDE SO8 PS9821-2 15 2.7 to 3.6 2500 25 15 45 50 UL, VDE SO8 PS9822-2 1 N = 2.7 to 3.6 L = 4.5 to 5.5 2500 25 15 500 max 700 max UL, VDE Isolation for measurement equipment, plasma display panels and factory automation equipment Single channel, CMOS output SO8 PS9851-1 15 4.5 to 5.5 2500 2 PS9851-2 15 34 37 UL, VDE Isolation for measurement equipment, plasma display panels and factory automation equipment Two channel, CMOS output SO8 20 4.5 to 5.5 2500 2 20 34 37 UL, VDE NOTES: 1. Other safety certifications available, see datasheet. 10 For information visit www.cel.com/optocouplers Digital Optocouplers for IGBT and MOSFET Motor Drive Applications Part Number SHIELD SHIELD Package PS9531 Vcc Range (V) tPHL- tPLH (ns) max Typical tPHL (ns) tPLH (ns) Safety Certification BV (Vr.m.s.) Single channel for MOSFET, IGBT driver isolation Features - 2.5A Output Current, High CMR (25K-50KV/us), UVLO (Under Voltage Lockout) protection with hysteresis SDIP6 Gull Wing PS9331L SDIP6 Gull Wing 8mm Creepage PS9331L2 DIP8 Thru-Hole PS9531 DIP8 Thru-Hole 8mm Creepage PS9531L1 SMT DIP8 Gull Wing 8mm Creepage PS9531L2 SMT DIP8 Gull Wing PS9531L3 8-Pin LSDIP Gull Wing PS9905 15 to 30 90 105 80 5000 UL, CSA, SEMKO, VDE 15 to 30 90 100 80 5000 UL, VDE, CSA, SEMKO 15 to 30 100 100 90 7500 UL, CSA, SEMKO, VDE 300 180 180 5000 UL, VDE, CSA Single channel for MOSFET, IGBT driver isolation Features - 0.6A Output Current, High CMR(25kV/us) DIP8 Thru-Hole PS9506 DIP8 Thru-Hole 8mm Creepage PS9506L1 SMT DIP8 Gull Wing 8mm Creepage PS9506L2 SMT DIP8 Gull Wing PS9506L3 SHIELD SHIELD VCLAMP PS9332L Single channel for MOSFET, IGBT driver isolation, Industrial inverter, induction heating Features - 2.0A Output Current, High CMR (25K-50kV/us), UVLO (Under Voltage Lock Out) protection with hysteresis SDIP6 Gull Wing PS9308L SDIP6 Gull Wing 8mm Creepage PS9308L2 SDIP8 Gull Wing PS9332L SDIP8 Gull Wing 8mm Creepage PS9332L2 Vs VLED Fault Desat Cathode Vcc2 VEE Anode VO Anode Vclamp Cathode 15 to 30 100 100 80 5000 UL, CSA, SEMKO, VDE 15 to 30 90 110 75 5000 UL,CSA, SEMKO, VDE VE Vcc1 Vs 10 to 30 VEE 16 pin SSOP Single channel for MOSFET, IGBT driver isolation, Industrial inverter, induction heating Features - 2.5A Output Current, High CMR(25kV/us), UVLO (Under Voltage Lock Out) protection with hysteresis, desaturation detection, Miller clamping PS9402 15 to 30 100 200 200 5000 UL, CSA, VDE Continued next page For information visit www.cel.com/optocouplers 11 Digital Optocouplers for IGBT and MOSFET Motor Drive Applications Continued... Motor Drive Isolation Motor drive applications demand more voltage and current than most ICs and microcontrollers can provide. A variety of devices have been developed to address the problem such as IGBTs, MOSFETs and Intelligent Power Modules (IPMs). These high power drivers use optocouplers to isolate other ICs and components from the power spikes and electrical noise that their motors generate. Package Part Number Vcc Range (V) Typical tPHL- tPLH (ns) max tPHL (ns) tPLH (ns) BV (Vr.m.s.) Safety Certification Single channel for MOSFET, IGBT driver isolation PS9307AL Features - 0.6A Output Current, High CMR 6 pin SDIP Gull Wing PS9306L 6 pin SDIP Gull Wing 8 mm Creepage PS9306L2 6 pin SDIP Gull Wing PS9307AL 6 pin SDIP Gull Wing 8mm Creepage PS9307AL2 10 to 30 300 180 180 5000 UL, VDE, CSA, SEMKO 10 to 30 80 100 100 5000 UL, CSA, VDE Digital High Functionality Optocouplers for Motor Drive Applications Package Part Number Vcc Range (V) Recommended Absolute Max Rating BV (Vr.m.s.) IO (mA) IF (mA) PS9113 SDIP6 Gull Wing 3 PS9313L SDIP6 Gull Wing 8mm Creepage 3 PS9313L2 tPLH (ns) Safety Certification1 Isolation for intelligent power module drivers, inverters Single channel, open collector output, high temp operation SOP5 2 Typical tPHL (ns) 4.5 to 20 3750 15 25 250 520 UL, VDE, CSA 4.5 to 20 5000 15 25 240 460 UL, VDE, CSA Continued next page 12 For information visit www.cel.com/optocouplers Digital High Functionality Optocouplers for Motor Drive Applications Continued... Package Part Number Vcc Range (V) Recommended Absolute Max Rating BV (Vr.m.s.) IO (mA) IF (mA) PS9513 DIP8 Thru-Hole 8mm Creepage PS9513L1 SMT DIP8 Gull Wing 8mm Creepage PS9513L2 SMT DIP8 Gull Wing PS9513L3 SHIELD 4.5 to 20 5000 tPHL (ns) Safety Certification1 tPLH (ns) Isolation for intelligent power module drivers, inverters Single channel, open co llector output, –40 to 100°C operation DIP8 Thru-Hole Typical 15 25 250 520 UL, VDE, CSA, BSI, SEMKO, NEMKO, DEMKO, FIMKO Isolation for intelligent power module drivers, inverters Single channel, totem pole output PS9309L SMT DIP6 Gull Wing PS9303L SDIP 6 Gull Wing 8mm Creepage PS9303L2 SDID 6 Gull Wing PS9309L SDID 6 Gulling 8mm Creeoage PS9309L2 4.5 to 20 5000 25 20 185 240 UL, CSA, VDE 4.5 to 20 5000 25 20 124 113 UL, CSA, SEMKO, VDE NOTES: 1. Other safety certifications available, see data sheet. 2. –40 to 100°C operation. 3. –40 to 110°C operation. Isolation Amplifier – Digital Package Part Number Vcc Range (V) Recommended Input Supply Current IDD1 (mA max) Output Supply Current IDD2 (mA max) Resolution (ENOB) PS9551AL4 4.5 to 5.5 15 (MHz typ) BV (Vr.m.s.) Safety Certification1 Isolation for intelligent power module drivers, inverters Digital isolation amplifier for motor drive applications SMT DIP8 Gull Wing 8mm Creepage Output Clock Frequency 15 12 10 5000 UL, CSA, VDE, SEMKO NOTES: 1. Other safety certifications available, see data sheet. For information visit www.cel.com/optocouplers 13 Isolation Amplifier – Analog Package Part Number Absolute Max Rating BV (Vr.m.s.) Input Supply Current IDD1 (mA max) Vcc (V) Output Supply Current IDD2 (mA max) Output Bandwidth Gain V/V (typ) (kHz typ) Gain Error (%) Safety Certification1 Analog isolation amplifier for motor drive applications, –40 to 100°C operation SMT DIP8 Gull Wing 8mm Creepage PS8551L4 5000 5.5 20 16 100 8 ±3% UL, CSA, BSI, VDE, SEMKO SMT DIP8 Gull Wing 8mm Creepage PS8551AL4 5000 5.5 16 16 100 8 ±1% UL, CSA, VDE, SEMKO NOTES: 1. Other safety certifications available, see data sheet. High Speed Analog Optocouplers Absolute Max Ratings Package Part Number Speed (Mbps) Typical BV Vcc IC IF (Vr.m.s.) (V) (mA) (mA) tPHL (ns) tPLH (ns) CTR 1 (N = Full range) Rank (%) Safety Certification 2 Single channel for power supplies, inverters, computers, peripherals, –55 to 100°C operation SOP5 PS8101 1 3750 35 8 25 500 600 N = 15 to 35 K = 20 to 35 UL, CSA, VDE Single channel for power supplies, inverters, computers, peripherals, –55 to 110°C operation SDIP6 SMT Gull Wing PS8302L SDIP6 SMT Gull Wing 8mm Creepage PS8302L2 1 5000 35 8 25 300 330 15 min UL, VDE, CSA, SEMKO Single channel for measurement and control equipment, modems, inverters, –55 to 100°C operation DIP8 Thru-Hole PS8501 DIP8 Thru-Hole 8mm Creepage PS8501L1 SMT DIP8 Gull Wing 8mm Creepage PS8501L2 SMT DIP8 Gull Wing PS8501L3 1 5000 35 8 25 220 350 15 min UL, CSA, BSI, VDE, SEMKO Continued next page 14 For information visit www.cel.com/optocouplers High Speed Analog Optocouplers Continued... Absolute Max Ratings Package Part Number Speed (Mbps) Typical BV Vcc IC IF (Vr.m.s.) (V) (mA) (mA) tPHL (ns) tPLH (ns) CTR 1 (N = Full range) Rank (%) Safety Certification 2 Single channel for measurement and control equipment, modems, inverters, –55 to 100°C operation DIP8 Thru-Hole PS8502 DIP8 Thru-Hole 8mm Creepage PS8502L1 SMT DIP8 Gull Wing 8mm Creepage PS8502L2 SMT DIP8 Gull Wing PS8502L3 1 5000 35 8 25 220 350 15 min UL, CSA, BSI, VDE, SEMKO Single Transistor, General Purpose DC Optocouplers Absolute Max Ratings Package Part Number BV (Vr.m.s.) VCEO (V) IF (mA) CTR IC (mA) Single channel DC device for low-speed logic applications (N = Full range) Rank (%) Safety Certification CTR measured @ VCE = 5V, IF = 5mA N = 50 to 400 H = 80 to 160 SMT DIP4 PS2501AL 5000 70 30 30 W = 130 to 260 UL Q = 100 to 200 L = 200 to 400 N = 80 to 600 K = 300 to 600 L = 200 to 400 SMT DIP4 PS2501L-1 5000 80 80 50 M = 80 to 240 D =100 to 300 UL H = 80 to 160 W = 130 to 260 Q = 100 to 200 N = 50 to 300 SOP4 PS2701A 3750 70 30 30 P = 150 to 300 For high temp applications see PS2761B, page 19 L = 100 to 300 SSOP4 N = 50 to 400 UL, CSA, BSI, VDE M = 50 to 150 PS2801C-1 For high temp applications see PS2861B, page 19 2500 80 30 30 L = 100 to 300 M = 100 to 400 UL, VDE, CSA, BSI P = 150 to 300 Continued next page For information visit www.cel.com/optocouplers 15 Single Transistor, General Purpose DC Optocouplers Continued... Absolute Max Ratings Package Part Number BV VCEO (Vr.m.s.) (V) IF (mA) CTR IC (mA) Four channel DC device for low-speed logic applications SSOP16 PS2801C-4 2500 80 (N = Full range) Rank (%) Safety Certification CTR measured @ VCE = 5V, IF = 5mA 30 30 N = 50 to 400 M = 100 to 400 UL, CSA, BSI, VDE Single Transistor, General Purpose AC Optocouplers Absolute Max Ratings Package Part Number BV VCEO (Vr.m.s.) (V) IF (mA) CTR IC (mA) Single channel AC devices with high isolation voltage DIP4 Thru-Hole PS2505-1 SMT DIP4 PS2505L-1 5000 (N = Full range) Rank (%) Safety Certification CTR measured @ VCE = 5V, IF = 5mA 80 ± 80 50 N = 80 to 600 UL N = 50 to 300 PS2705A SOP4 3750 70 ± 30 30 L = 100 to 300 UL, VDE, CSA M = 50 to 150 SSOP4 PS2805C-1 2500 80 ± 30 30 Four channel AC devices with high isolation voltage SSOP16 PS2805C-4 2500 N = 50 to 400 M = 100 to 400 UL, VDE, CSA, BSI CTR measured @ VCE = 5V, IF = 5mA 80 ± 30 30 N = 50 to 400 M = 100 to 400 UL, VDE, CSA, BSI NOTE: Other safety certifications available, see datasheet. 16 For information visit www.cel.com/optocouplers Single Transistor DC & AC Optocouplers, Characterized for low input current (1 mA) Absolute Max Ratings Package Part Number BV VCEO (Vr.m.s.) (V) IF (mA) CTR IC (mA) Single channel DC device optimized for power supply applications (N = Full range) Rank (%) Safety Certification CTR measured @ VCE = 5V, IF = 1mA N = 100 to 400 SOP4 PS2711 3750 40 50 40 K = 200 to 400 L = 150 to 300 UL, VDE M = 100 to 200 N = 100 to 400 SSOP4 PS2811-1 2500 40 50 40 K = 200 to 400 L = 150 to 300 UL, VDE, CSA M = 100 to 200 N = 100 to 400 4 Pin Mini Flat PS2911 2500 40 50 40 K = 200 to 400 L = 150 to 300 UL, VDE, BSI M = 100 to 200 N = 50 to 200 4 Pin Mini Flat PS2913 2500 120 50 30 K = 100 to 200 L = 75 to 150 UL, VDE, BSI M = 50 to 100 For information visit www.cel.com/optocouplers 17 Single Transistor DC & AC Optocouplers, Characterized for low input current (1 mA) Continued... Absolute Max Ratings Package Part Number BV VCEO (Vr.m.s.) (V) IF (mA) CTR IC (mA) Four channel DC device optimized for power supply applications SSOP16 PS2811-4 2500 40 Safety Certification CTR measured @ VCE = 5V, IF = 1mA 50 40 Single channel AC devices optimized for power supply applications N = 100 to 400 UL, VDE, CSA CTR measured @ VCE = 5V, IF = ±1mA SOP4 PS2715 3750 40 ±50 40 N = 100 to 400 UL, VDE, BSI, CSA SSOP4 PS2815-1 2500 40 ±50 40 N = 100 to 400 UL, VDE, CSA 4 Pin Mini Flat PS2915 2500 40 ±50 40 N = 100 to 400 UL, VDE, BSI Four channel AC device optimized for power supply applications SSOP16 18 (N = Full range) Rank (%) PS2815-4 2500 40 CTR measured @ VCE = 5V, IF = ±1mA ±50 40 N = 100 to 400 UL, VDE For information visit www.cel.com/optocouplers Single Transistor DC Optocouplers, Guaranteed 0.4mm Insulation Absolute Max Ratings Package Part Number BV VCEO (Vr.m.s.) (V) IF (mA) CTR IC (mA) Single channel DC devices, high isolation voltage (N = Full range) Rank (%) Safety Certification 1 CTR measured @ VCE = 5V, IF = 5mA N = 50 to 400 4 pin LSOP stretched Gull Wing 8mm Creepage - 40°C to +115°C operation PS2381 5000 80 60 50 L = 100 to 300 M = 50 to 150 UL, VDE, CSA, CQC, SEMKO W = 130 to 260 DIP4 Thru-Hole 110°C operation PS2561D N = 50 to 400 SMT DIP4 110°C operation PS2561DL H = 80 to 160 DIP4 Thru-Hole Gull Wing 110°C operation PS2561DL1 SMT DIP4 Gull Wing 110°C operation PS2561DL2 DIP4 Thru-Hole 110°C operation PS2561F SMT DIP4 Gull Wing 110°C operation PS25561FL 5000 80 40 50 L = 200 to 400 Q = 100 to 200 UL, VDE, BSI, CSA, SEMKO, NEMKO, DEMKO, FIMKO W = 130 to 260 5000 80 30 50 K = 300 to 600 UL N = 50 to 400 SOP4 110°C operation PS2761B 3750 70 25 40 K = 200 to 400 M = 50 to 150 UL, BSI L = 100 to 300 N = 50 to 300 SSOP4 110°C operation PS2861B 3750 70 50 50 L= 100 to 300 M = 50 to 150 UL, BSI, CSA, VDE, CQC, SEMKO, NEMKO, DEMKO, FIMKO NOTES: 1. Other safety certifications available, see datasheet. Single Transistor, with internal base-emitter resistor to increase the switching time Absolute Max Ratings Package Part Number BV VCEO (Vr.m.s.) (V) IF (mA) CTR IC (mA) Single channel DC device with internal base-emitter resistor to increase the switching time DIP4 Thru-Hole PS2514 SMT DIP4 PS2514L For information visit www.cel.com/optocouplers 5000 40 (N = Full range) Rank (%) Safety Certification CTR measured @ VCE = 5V, IF = 5mA 30 20 N = 50 to 200 UL, VDE, CSA, CQC 19 Single Transistor AC Optocouplers, Guaranteed 0.4mm Insulation (BSI) Absolute Max Ratings Package Part Number BV VCEO (Vr.m.s.) (V) IF (mA) CTR IC (mA) Single channel AC devices, high isolation voltage DIP4 Thru-Hole PS2565 SMT DIP4 PS2565L DIP4 Thru-Hole Gull Wing PS2565L1 SMT DIP4 Gull Wing PS2565L2 (N = Full range) Rank (%) Safety Certification 1 CTR measured @ VCE = 5V, IF = 5mA UL, VDE, BSI, CSA, 5000 80 ±80 50 N = 80 to 400 SEMKO, NEMKO, DEMKO, FIMKO NOTES: 1. Other safety certifications available, see datasheet. Single Transistor, High Performance DC Optocouplers Absolute Max Ratings Package Part Number BV (Vr.m.s.) VCEO (V) IF (mA) CTR IC (mA) Single channel DC devices, high VCE (N = Full range) Rank (%) Safety Certification CTR measured @ VCE and IF as noted VCE = 5V, IF = 5mA N = 50 to 400 SOP4 PS2703 3750 120 50 30 K = 200 to 400 L = 100 to 300 UL, VDE, BSI, CSA M = 50 to 150 VCE = 5V, IF = 1mA N = 50 to 200 4 Pin Mini Flat PS2913 2500 120 50 30 K = 100 to 200 UL, VDE, BSI L = 75 to 150 M = 50 to 100 20 For information visit www.cel.com/optocouplers Single Transistor Optocouplers in Miniature Quad Packages Absolute Max Ratings Package Part Number BV VCEO (Vr.m.s.) (V) IF (mA) CTR IC (mA) Four channel, DC devices PS2841-4A Safety Certification CTR measured @ VCE = 0.4V, IF = 1mA PS2841-4B SSOP12 PS2841-4A SSOP12 PS2841-4B 1500 70 20 20 Four channel, AC device SSOP12 (N = Full range) Rank (%) PS2845-4A For information visit www.cel.com/optocouplers N = 100 to 400 UL CTR measured @ VCE = 0.4V, IF = 1mA 1500 70 ±20 20 N = 100 to 400 UL 21 Darlington Transistor, General Purpose Optocouplers Absolute Max Ratings Package Part Number BV VCEO (Vr.m.s.) (V) IF (mA) CTR IC (mA) Single channel DC devices, high isolation voltage DIP4 Thru-Hole Safety Certification CTR measured @ VCE = 2V, IF = 1mA N = 200 min PS2502-1 5000 SMT DIP4 (N = Full range) Rank (%) 40 80 200 PS2502L-1 K = 2000 min L = 700 to 3400 UL M = 200 to 1000 N = 200 min SOP4 PS2702-1 3750 40 50 200 K = 2000 min L = 700 to 3400 UL, VDE, BSI, CSA M = 200 to 1000 N = 200 min SSOP4 PS2802-1 2500 40 50 90 K = 2000 min L = 700 to 3400 UL, VDE, BSI, CSA M = 200 to 1000 Four channel DC devices, high isolation voltage SSOP16 PS2802-4 2500 CTR measured @ VCE = 2V, IF = 1mA 40 50 100 Single channel AC device, high isolation voltage 22 DIP4 Thru-Hole PS2506 SMT DIP4 PS2506L 5000 N = 200 min UL, VDE, BSI, CSA CTR measured @ VCE = 2V, IF = ±1mA 40 ±80 200 N = 200 min UL For information visit www.cel.com/optocouplers Darlington Transistor Optocouplers, Guaranteed 0.4mm insulation (BSI) Absolute Max Ratings Package Part Number BV VCEO (Vr.m.s.) (V) IF (mA) CTR IC (mA) Single channel DC device, high isolation voltage DIP4 Thru-Hole PS2562 SMT DIP4 PS2562L DIP4 Thru-Hole Gull Wing PS2562L1 SMT DIP4 Gull Wing PS2562L2 (N = Full range) Rank (%) Safety Certification 1 CTR measured @ VCE = 2V, IF = 1mA N = 200 min 5000 40 80 200 K = 2000 to 3400 L = 700 to 3400 UL, VDE, BSI, CSA, NEMKO, SEMKO, DEMKO, FIMKO M = 200 to 1000 NOTES: 1. Other safety certifications available, see datasheet. Darlington Transistor, High VCEO DC Optocouplers Absolute Max Ratings Package Part Number BV VCEO (Vr.m.s.) (V) IF (mA) CTR IC (mA) Single channel DC devices Safety Certification 1 CTR measured @ VCE = 2V, IF = 1mA DIP4 Thru-Hole PS2533 SMT DIP4 PS2533L SOP4 SSOP4 5000 350 80 150 N = 1500 to 6500 UL, VDE, BSI, CSA PS2733 2500 350 50 150 N = 1500 min UL, VDE, BSI, CSA PS2833-1 2500 350 50 60 N = 400 to 4500 UL, VDE, CSA Four channel DC device SSOP16 (N = Full range) Rank (%) PS2833-4 CTR measured @ VCE = 2V, IF = 1mA 2500 350 50 60 Single channel DC devices N = 400 to 4500 UL CTR measured @ VCE = 2V, IF = 1mA DIP4 Thru-Hole PS2535 SMT DIP4 Gull Wing PS2535L For information visit www.cel.com/optocouplers 5000 350 50 120 N = 400 to 5500 L = 1500 to 5500 UL, VDE, BSI 23 Optocoupler Package Dimensions Dimensions in millimeters. Dimensions are nominal, please refer to datasheets. DIP4 Thru-Hole L — SMT DIP4 L1 — DIP4 Thru-Hole Gull Wing L2 — SMT DIP4 Gull Wing L1 — DIP4 Thru-Hole Gull Wing with 8mm Creepage L2 — SMT DIP4 Gull Wing with 8mm Creepage 24 For information visit www.cel.com/optocouplers Optocoupler Package Dimensions Continued... 4-Pin LSOP Dimensions in millimeters. Dimensions are nominal, please refer to datasheets. 8-Pin SDIP DIP8 Thru-Hole L — SMT DIP8 L1 — DIP8 Thru-Hole with 8mm Creepage L2 — SMT DIP8 Gull Wing with 8mm Creepage For information visit www.cel.com/optocouplers 25 Optocoupler Package Dimensions Continued... Dimensions in millimeters. Dimensions are nominal, please refer to datasheets. L3 — SMT DIP8 Gull Wing L4 — SMT DIP8 Gull Wing with 8mm Creepage DIP16 Thru-Hole L — SMT DIP16 SOP4 2.54mm pin pitch SSOP4 1.27mm pin pitch 26 For information visit www.cel.com/optocouplers Optocoupler Package Dimensions Continued... Dimensions in millimeters. Dimensions are nominal, please refer to datasheets. SOP5 1.27mm pin pitch SOP5 1.27mm pin pitch with 5.5mm Creepage S08 1.27mm pin pitch SSOP12 Mini Quad 1.27mm pin pitch SSOP16 1.27mm pin pitch 4-Pin Mini Flat For information visit www.cel.com/optocouplers 27 Optocoupler Package Dimensions Continued... Dimensions in millimeters. Dimensions are nominal, please refer to datasheets. L — SDIP6 SMT Gull Wing L2 — SDIP6 SMT Gull Wing with 8mm Creepage 8-Pin LSDIP 16-Pin SSOP 28 For information visit www.cel.com/optocouplers Mounting Pad Dimensions for Optocouplers & Solid State Relays Package A B1 B2 C D Surface Mount DIP, SOP and SSOP Packages (mm) DIP (SMT) 4, 6, 8, 12, 16 Pin 8.2 - 2.54 1.7 2.2 DIP (L2 – SMT) 4, 6, 8, 16 Pin 10.2 - 2.54 1.7 2.2 SOP 4, 8, 16 Pin 6.25 - 2.54 0.8 1.45 SOP 5 Pin 6.25 1.27 2.54 0.8 1.45 SSOP 4, 16 Pin 1.27mm Pitch 6.25 - 1.27 0.8 1.45 SSOP 8 Pin (SO-8) 1.27mm Pitch 5.25 - 1.27 0.8 1.45 SSOP 12 Pin 0.8mm Pitch 6.25 - 0.8 0.5 1.45 LSDIP 8 Pin 16.6 - 1.27 0.9 2 SDIP 6 Pin 9.2 - 1.27 0.8 2.2 Package A B C Mini Flat Packages (mm) Optocoupler Version PS29xx, 1.27mm Pitch 4.14 4.7 5.7 SSR Version PS78xx, 1.27mm Pitch 3.6 4.4 5.3 NOTES: The Mini Flat package meets the 4.0mm air distance and outer creepage requirement. All dimensions are subject to change without notice. Please contact CEL to ensure that you have the latest version of this document. For information visit www.cel.com/optocouplers 29 Solid State Relays Solid State Relays — Introduction Solid State Relays (SSRs) are semiconductor-based switching devices that operate optically rather than mechanically. They incorporate three major components: A GaAs LED on the input side, a photovoltaic diode array, and a FET switch on the output side. Renesas Solid State Relays are available in a standard Normally Open configuration: FORM A “Normally Open” In a FORM A relay, when no input current is present, the FET switch on the output side is nonconductive, or “open.” When current is applied, the LED lights and the photovoltaic diode array responds by producing a voltage that’s applied to the gates of the FET. When the gates’ voltage threshold is reached the FET switch becomes conductive - or closes - effectively switching the relay’s load. When the current is removed, the light stops and blocking diodes prevent charge from leaving the gates of the FET. As voltage from the photovoltaic array is reduced across the blocking diodes, it reaches a level that triggers a thyristor. The charge is then quickly removed from the gates and the FET goes nonconductive — returning the relay to its Normally Open state. Why switch from Electro-Mechanical Relays (EMRs) to Solid State Relays? • No moving parts • High resistance to shock and vibration • No arcing or contact bounce • No Cross Talk • Extremely fast • Will switch AC or DC, output conduction is unrelated to input current levels • Stable RON over the life of the device • Proven reliability: 150X better than EMRs CEL offers a wide variety of Renesas SSRs for a broad range of applications: These include low CxR devices for high frequency signal control, low RON devices for high current control, and devices designed specifically to handle high voltages. SSR input logic is compatible with a variety of control schemes and can be driven directly by low voltage microcontrollers. With Renesas’s broad product offering, it’s easy to find an SSR that meets your specific needs. Applications: • Telecom/Datacom • Test & Measurement • Programmable Logic Control • Instrumentation • Power Switching • Motor Drive Interfaces For information visit www.cel.com/optocouplers 31 Package Styles Renesas SSRs are available in a variety of industry-standard DIP and SOP packages. Many are pin-for-pin compatible with other devices on the market. For space-constrained designs Renesas offers a number of relays in a 4.6 x 2.64 x 1.85 mm Mini Flat-Lead package. The smallest in the industry, it enables extremely high placement densities, while its shortened signal paths help minimize the parasitic effects of the traces. See pages 37 and 38 for package drawings and dimensions. Manufacturing and Safety Certification Renesas Mini Flat-Lead SSR package is the industry’s smallest Renesas production line is located at Kyushu Denshi, Japan, where all processes,from initial die loading to final QA and package marking, are fully-automated. This helps to speed production and lower manufacturing costs, while assuring the superior quality and consistency you’ve come to expect from Renesas. Renesas SSRs are typically UL, CSA, BSI and VDE Part 2 certified. Other international certifications are also available, please refer to data sheets or contact CEL for specifics. Solid State Relay Product Families POWER and INDUSTRIAL APPLICATIONS PS7113 Series High Current, Low RON devices in Thru-Hole and SMT DIP packages PS7206 High Current, Low RON devices in SOP4 packages PS7160, PS7360 Series TELECOM APPLICATIONS (Line Voltage) INSTRUMENTATION and ATE (Automated Test Equipment) 32 600V Load Voltage devices in Thru-Hole and SMT DIP packages PS714x, PS724x, PS734x Series 400V Load Voltage, 120 - 200mA Load Current devices in Thru- Hole and SMT DIP and SOP packages PS7200 Series Low CxR devices in SOP4 packages PS780x Series Low CxR devices ultra-miniature Mini Flat-Lead packages For information visit www.cel.com/optocouplers SSR Part Numbering System Package Style PS71 6 or 8 Pin Thru-Hole & SMT DIP PS72 4 & 8 Pin SOP Form PS73 6 Pin Thru-Hole & SMT DIP 1A Single Channel FORM A (Normally Open) device PS78 4 Pin Mini Flat-Lead 2A Dual Channel FORM A device Configuration Indentifier Pb-Free Variations A SnBi Plating Blank Standard SSR AX NiPdAu Plating A High Voltage/Low Capacitance SSR E High Linearity SSR Tape & Reel Options E3 Small Reel Lead Configuration F3 Large Reel Blank For details, visit: http://www.cel.com/eng/tape_reel.pdf Standard DIP, SOP or Mini Flat-Lead package “L” Designation SMT DIP Gull Wing package For information visit www.cel.com/optocouplers 33 Product Lineup Function 6-pin DIP (1-ch) Standard Normally Open PS7113-1A PS7113-2A PS7141E-1A PS7141E-2A PS7160-1A PS7160-2A Low CxR - - Low On-State Resistance - - Low Offset Voltage - High Isolation Voltage 34 PS7341-1A PS7360-1A 8-pin DIP (2-ch) 4-pin SOP (1-ch) 4-pin Mini Flat Lead PS7241E-1A - - - PS7206-1A PS7804-1A PS720C - 1A PS7802A-1A - - PS7801-1A - - - For information visit www.cel.com/optocouplers SSRs for Power and Industrial Applications In power and industrial applications, 6 pin SSRs can be configured to switch loads in a variety of ways. The Maximum Load Current specifications in the tables below are provided for these configurations: Package Part Number Form Max. Load Current IL (mA) Typical Ratings Breakdown Voltage VL (V) RON (Ω) COUT (pF) Norm. Open tON (ms) tOFF Safety Certification (ms) Single Channel, 1500 Vr.m.s. Isolation Voltage DIP6 Thru-Hole A 350 450 700 100 0.9 250 1.3 0.06 UL, BSI, CSA A 90 130 200 600 42 110 0.8 0.06 UL, BSI, CSA PS7113-1A SMT DIP6 Gull Wing PS7113L-1A DIP6 Thru-Hole PS7160-1A SMT DIP6 Gull Wing PS7160L-1A SOP4 PS720C-1A A 1250 60 0.1 230 2.0 0.05 UL SOP4 PS7206-1A A 600 60 0.6 70 0.4 0.08 UL, BSI A 350 100 0.9 250 1.3 0.06 UL, BSI, CSA A 90 600 42 110 0.8 0.06 UL, BSI, CSA 90 130 200 600 41 110 0.6 0.03 UL, BSI, CSA, VDE, SEMKO, DEMKO, NEMKO, FIMKO Dual Channel, 1500 Vr.m.s. Isolation Voltage DIP8 Thru-Hole PS7113-2A SMT DIP8 Gull Wing PS7113L-2A DIP8 Thru-Hole PS7160-2A SMT DIP8 Gull Wing PS7160L-2A Single Channel, 3750 Vr.m.s. Isolation Voltage DIP6 Thru-Hole PS7360-1A A SMT DIP6 Gull Wing PS7360L-1A For information visit www.cel.com/optocouplers 35 SSRs for Telecom Applications Max Load Current specified using Load Connection Package Part Number (page 35) See individual data sheets for specifications for Load Connections Typical Ratings & Isolation Voltage BV (Vr.m.s.) Max. Load Current IL (mA) RON (Ω) COUT (pF) Norm. Open tON tOFF (ms) (ms) A 1500 120 36 36 0.5 0.07 UL, BSI, SEMKO, DEMKO, NEMKO, FIMKO A 1500 120 22 50 0.5 0.07 UL, BSI, SEMKO, DEMKO, NEMKO, FIMKO A 3750 150 20 65 0.35 0.03 UL, BSI, CSA, SEMKO, DEMKO, FIMKO A 1500 100 36 36 0.4 0.07 UL, BSI Form Safety Certification Single Channel, 400V Breakdown Voltage DIP6 Thru-Hole PS7141E-1A1 SMT DIP6 Gull Wing PS7141EL-1A1 SOP4 PS7241E-1A DIP6 Thru-Hole PS7341-1A SMT DIP6 Gull Wing PS7341L-1A1 Two Channel, 400V Breakdown Voltage DIP8 Thru-Hole PS7141E-2A SMT DIP8Gull Wing PS7141EL-2A NOTES: 1. High Linearity Relay. 36 For information visit www.cel.com/optocouplers SSRs for ATE and Instrumentation Low CxR, miniature SOP and Mini Flat-Lead packages Package Part Number Form Typical Ratings Max. Load Current IL (mA) Breakdown Voltage VL (V) RON (Ω) COUT (pF) Norm. Open tON tOFF (ms) (ms) Safety Certification Single Channel, 500 Vr.m.s. Isolation Voltage 4 Pin Mini Flat-Lead PS7801-1A A 100 40 10.5 1.2 0.02 0.15 UL 4 Pin Mini Flat-Lead PS7802A-1A A 250 40 1.1 11.5 0.05 0.05 UL 4 Pin Mini Flat-Lead PS7804-1A A 400 60 1.1 27 0.15 0.05 UL SSR Package Dimensions Dimensions in millimeters. Dimensions are nominal, please refer to datasheets. DIP6 Thru-Hole For information visit www.cel.com/optocouplers SMT DIP6 Gull Wing 37 SSR Package Dimensions Continued... Dimensions in millimeters. Dimensions are nominal, please refer to datasheets. DIP8 Thru-Hole SMT DIP8 Gull Wing SOP4 4-Pin Mini Flat-Lead 38 For information visit www.cel.com/optocouplers For information visit www.cel.com/optocoupler 39 A Business Partner of Renesas Electronics Corporation. CEL Headquarters 4590 Patrick Henry Drive Santa Clara, CA 95054 Tel: (408) 919-2500 E-mail: [email protected] Learn more www.cel.com/optocouplers © 2015 California Eastern Laboratories 08.2015 / 2M For a complete list of sales offices, representatives and distributors, Please visit our website: www.cel.com/contactus