NX7339BB-AA

Preliminary
NX7339BB-AA
Data Sheet
LASER DIODE
R08DS0005EJ0300
Rev.3.00
Sep 19, 2010
1 310 nm InGaAsP MQW-FP LASER DIODE COAXIAL MODULE FOR OTDR APPLICATION
DESCRIPTION
<R>
The NX7339BB-AA is a 1 310 nm Multiple Quantum Well (MQW) structured
Fabry-Perot (FP) laser diode coaxial module with single mode fiber.
This
module is specified to operate under pulsed condition and designed for light
source of Optical Time Domain Reflectometer (OTDR).
FEATURES
*1
• High output power
Pf = 50 mW @ IFP = 400 mA
• Long wavelength
C = 1 310 nm
*1 Pulse Conditions: Pulse width (PW) = 10 s, Duty = 1%
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
R08DS0005EJ0300 Rev.3.00
Sep 19, 2010
Page 1 of 6
NX7339BB-AA
<R>
Chapter Title
PACKAGE DIMENSIONS (UNIT: mm)
OPTICAL FIBER CHARACTERISTICS
Parameter
Specification
Unit
Mode Field Diameter
9.30.5
m
Cladding Diameter
1252
m
2
%
1.6
%
0.90.1
mm
1 140 to 1 280
nm
30
mm
1 000 MIN.
mm
Maximum Cladding Noncircularity
Maximum Core/Cladding Concentricity
Outer Diameter
Cut-off Wavelength
Minimum Fiber Bending Radius
Fiber Length
<R>
R08DS0005EJ0300 Rev.3.00
Sep 19, 2010
Page 2 of 6
NX7339BB-AA
Chapter Title
ORDERING INFORMATION
Part Number
FIange Type
NX7339BB-AA
flat mount flange
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Ratings
Unit
Pulsed Forward Current
IFP
600
mA
Reverse Voltage
VR
2.0
V
Operating Case Temperature
TC
20 to +60
C
Storage Temperature
Tstg
40 to +85
C
Lead Soldering Temperature
Tsld
350 (3 sec.)
C
Relative Humidity (noncondensing)
RH
85
%
*1
*1
Pulse Condition: Pulse Width (PW) = 10 s, Duty = 1%
ELECTRO-OPTICAL CHARACTERISTICS (T C = 25C)
Parameter
Forward Voltage
Symbol
VFP
Conditions
MIN.
IFP = 400 mA,
TYP.
MAX.
Unit
2.5
4.0
V
20
30
mA
PW = 10  s, Duty = 1%
Threshold Current
Ith
Optical Output Power from Fiber
Pf
IFP = 400 mA,
25
50
mW
1 290
1 310
1 330
nm
4.5
10.0
nm
PW = 10  s, Duty = 1%
Center Wavelength
C
RMS (20 dB), IFP = 400 mA,
PW = 10  s, Duty = 1%
Spectral Width

RMS (20 dB), IFP = 400 mA,
PW = 10  s, Duty = 1%
Rise Time
tr
10-90%
2.0
ns
Fall Time
tf
90-10%
2.0
ns
MAX.
Unit
50
mA
ELECTRO-OPTICAL CHARACTERISTICS (T C = 0 to +60C)
Parameter
Symbol
Threshold Current
Ith
Optical Output Power from Fiber
Pf
Conditions
IFP = 400 mA,
MIN.
TYP.
15
mW
PW = 10  s, Duty = 1%
Center Wavelength
C
RMS (20 dB), IFP = 400 mA,
1 280
1 342.5
nm
PW = 10  s, Duty = 1%
Temperature Dependency of
/T
0.35
nm/C
Center Wavelength
Spectral Width

RMS (20 dB), IFP = 400 mA,
10
nm
PW = 10  s, Duty = 1%
R08DS0005EJ0300 Rev.3.00
Sep 19, 2010
Page 3 of 6
NX7339BB-AA
Chapter Title
TYPICAL CHARACTERISTICS (TC = 25C, unless otherwise specified)
Remark The graphs indicate nominal characteristics.
R08DS0005EJ0300 Rev.3.00
Sep 19, 2010
Page 4 of 6
NX7339BB-AA
Chapter Title
REFERENCE
Document Name
Opto-Electronics Devices Pamphlet
*1
*1
Document No.
PX10160E
Published by the former NEC Electronics Corporation.
R08DS0005EJ0300 Rev.3.00
Sep 19, 2010
Page 5 of 6
NX7339BB-AA
Chapter Title
SAFETY INFORMATION ON THIS PRODUCT
Warning
Laser Beam
A laser beam is emitted from this diode during operation.
The laser beam, visible or invisible, directly or indirectly, may cause injury to the eye or loss of
eyesight.
• Do not look directly into the laser beam.
• Avoid exposure to the laser beam, any reflected or collimated beam.
Caution
GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final dis posal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
Caution
Optical Fiber
A glass-fiber is attached on the product. Handle with care.
R08DS0005EJ0300 Rev.3.00
Sep 19, 2010
• When the fiber is broken or damaged, handle carefully to avoid injury from the damaged part
or fragments.
Page 6 of 6
Revision History
Rev.

3.00
Date
Jul 2006
Sep 19, 2010
NX7339BB-AA Data Sheet
Page

p.1
p.2
Description
Summary
Previous No. : PL10604EJ02V0DS
Modification of photograph
Modification of PACKAGE DIMENSIONS
All trademarks and registered trademarks are the property of their respective owners.
C-1