NX7335 Series

LASER DIODE
NX7335 Series
1 310 nm InGaAsP MQW-FP LASER DIODE
COAXIAL MODULE WITH MONITOR PD FOR OTDR APPLICATION
1550nm OTDR APPLICATION
DIODE MODULE
DESCRIPTION
The NX7335 Series is a 1 310 nm Multiple Quantum Well (MQW)
structured Fabry-Perot (FP) laser diode coaxial module with single mode
fiber.
This module is specified to operate under pulsed condition and
designed for light source of Optical Time Domain Reflectometer (OTDR).
NX7335AN-AA
FEATURES
*1
• High output power
Pf = 40 mW @ IFP = 200 mA
• Long wavelength
C = 1 310 nm
• Built-in monitor PD
*1 Pulse Conditions: Pulse width (PW) = 10 s, Duty = 1%
NX7335BN-AA
Document No. PL10756EJ01V0DS (1st edition)
Date Published July 2009 NS
NX7335 Series
PACKAGE DIMENSIONS (UNIT: mm)
2
Data Sheet PL10756EJ01V0DS
NX7335 Series
Data Sheet PL10756EJ01V0DS
3
NX7335 Series
OPTICAL FIBER CHARACTERISTICS
Parameter
Specification
Unit
Mode Field Diameter
9.51
m
Cladding Diameter
1252
m
2
%
1.6
%
0.90.1
mm
1 140 to 1 280
nm
30
mm
1 000 MIN.
mm
Maximum Cladding Noncircularity
Maximum Core/Cladding Concentricity
Outer Diameter
Cut-off Wavelength
Minimum Fiber Bending Radius
Fiber Length
4
Data Sheet PL10756EJ01V0DS
NX7335 Series
ORDERING INFORMATION
Part Number
FIange Type
NX7335AN-AA
without flange
NX7335BN-AA
flat mount flange
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Ratings
Unit
Pulsed Forward Current
IFP
300
mA
Reverse Voltage
VR
2.0
V
Reverse Voltage (monitor PD)
VRM
10
V
Reverse Current (monitor PD)
IFPM
2.0
mA
Operating Case Temperature
TC
0 to +60
C
Storage Temperature
Tstg
40 to +85
C
Lead Soldering Temperature
Tsld
350 (3 sec.)
C
Relative Humidity (noncondensing)
RH
85
%
*1
*1 Pulse Condition: Pulse Width (PW) = 10 s, Duty = 1%
ELECTRO-OPTICAL CHARACTERISTICS (T C = 25C)
Parameter
Forward Voltage
Symbol
VFP
Conditions
MIN.
TYP.
IFP = 200 mA,
MAX.
Unit
3.5
V
30
mA
PW = 10  s, Duty = 1%
Threshold Current
Ith
Optical Output Power from Fiber
Pf
8
IFP = 200 mA,
20
40
1 290
1 310
mW
PW = 10  s, Duty = 1%
Center Wavelength
C
RMS (20 dB), IFP = 200 mA,
1 330
nm
10.0
nm
PW = 10  s, Duty = 1%
Spectral Width

RMS (20 dB), IFP = 200 mA,
PW = 10  s, Duty = 1%
Rise Time
tr
10-90%
0.5
2.0
ns
Fall Time
tf
90-10%
0.5
2.0
ns
15
Forward Current (CW)
Ifcw
Pfcw = 2 mW
Monitor Current
Im
Pfcw = 2 mW, VRM = 2 V
Data Sheet PL10756EJ01V0DS
0.05
mA
2
mA
5
NX7335 Series
ELECTRO-OPTICAL CHARACTERISTICS (T C = 0 to +60C)
Parameter
Optical Output Power from Fiber
Symbol
Pf
Conditions
IFP = 200 mA,
MIN.
TYP.
MAX.
10
Unit
mW
PW = 10  s, Duty = 1%
Center Wavelength
C
RMS (20 dB), IFP = 200 mA,
1 280
1 352
nm
10
nm
PW = 10  s, Duty = 1%
Spectral Width

RMS (20 dB), IFP = 200 mA,
PW = 10  s, Duty = 1%
6
Data Sheet PL10756EJ01V0DS
NX7335 Series
TYPICAL CHARACTERISTICS (T C = 25C, unless otherwise specified)
Remark The graphs indicate nominal characteristics.
Data Sheet PL10756EJ01V0DS
7
NX7335 Series
REFERENCE
Document Name
Opto-Electronics Devices Pamphlet
8
Document No.
PX10160E
Data Sheet PL10756EJ01V0DS
NX7335 Series
SAFETY INFORMATION ON THIS PRODUCT
Warning
Laser Beam
A laser beam is emitted from this diode during operation.
The laser beam, visible or invisible, directly or indirectly, may cause injury to the eye or loss of
eyesight.
• Do not look directly into the laser beam.
• Avoid exposure to the laser beam, any reflected or collimated beam.
Caution GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the
following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
Caution Optical Fiber
A glass-fiber is attached on the product. Handle with care.
• When the fiber is broken or damaged, handle carefully to avoid injury from the damaged part
or fragments.
Data Sheet PL10756EJ01V0DS
9