NX8313UD

LASER DIODE
NX8313UD
1 310 nm FOR LONG HAUL 2.5 Gb/s
InGaAsP MQW-DFB LASER DIODE TOSA
DESCRIPTION
The NX8313UD is a 1 310 nm Multiple Quantum Well (MQW) structured
Distributed Feed-Back (DFB) laser diode TOSA (transmitter optical subassembly) with InGaAs monitor PIN-PD in a receptacle type package
designed for SFF/SFP transceiver with LC duplex receptacle.
APPLICATION
• STM-16 (L-16.1), SONET OC-48 (LR-1)
FEATURES
• Internal optical isolator
• Optical output power
Pf = 2.0 mW
• Low threshold current
lth = 10 mA TYP. @ TC = 25C
• Wide operating temperature range TC = 40 to +85C
• InGaAs monitor PIN-PD
• Small package
Document No. PL10645EJ01V0DS (1st edition)
Date Published November 2006 NS CP(K)
 3.8 mm TOSA (Total length 12.0 mm MAX.)
NX8313UD
PACKAGE DIMENSIONS (UNIT : mm)
2
Preliminary Data Sheet PL10645EJ01V0DS
NX8313UD
ORDERING INFORMATION
Part Number
NX8313UD-AZ
Package
Pin Connections
 3.8 mm TOSA
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Ratings
Unit
Optical Output Power from Fiber
Pf
5.0
mW
Forward Current of LD
IF
150
mA
Reverse Voltage of LD
VR
2.0
V
Forward Current of PD
IF
2.0
mA
Reverse Voltage of PD
VR
15
V
Operating Case Temperature
TC
40 to +85
C
Storage Temperature
Tstg
40 to +85
C
Lead Soldering Temperature
Tsld
350 (3 sec.)
C
Preliminary Data Sheet PL10645EJ01V0DS
3
NX8313UD
ELECTRO-OPTICAL CHARACTERISTICS (T C = 40 to +85C, unless otherwise specified)
Parameter
Symbol
Operating Voltage
Vop
Threshold Current
Ith
Optical Output Power from Fiber
Modulation Current
Pf
Side Mode Suppression Ratio
CW
2
CW, TC = 25C
4
CW
Imod
d

Peak Emission Wavelength
MIN.
CW, Pf = 2.0 mW

Differential Efficiency
Conditions
p
SMSR
MAX.
Unit
1.2
1.6
V
50
mA
10
20
2.0
CW, Pf = 2.0 mW
7
CW, Pf = 2.0 mW, TC = 25C
9
CW, Pf = 2.0 mW
0.04
CW, Pf = 2.0 mW, TC = 25C
0.07
CW, Pf = 2.0 mW, RMS (20 dB)
1 280
CW, Pf = 2.0 mW
TYP.
mW
50
20
30
0.29
0.10
mA
W/A
0.20
1 335
30
nm
dB
Rise Time
tr
Ib = Ith, 10-90%
200
ps
Fall Time
tf
Ib = Ith, 90-10%
200
ps
Monitor Current
Im
CW, VR = 1.5 V, Pf = 1.0 mW
2 000
A
Monitor Dark Current
ID
VR = 1.5 V
500
nA
VR = 1.5 V, TC = 25C
50
100

CW, Im = const. (@ Pf = 2.0 mW)
1.0
1.0
dB
Repeatability

With master pigtail
1.0
1.0
dB
Optical Isolation
Is
CW, Pf = 2.0 mW
20
Tracking Error
*1
*1 Tracking Error: 
4
Preliminary Data Sheet PL10645EJ01V0DS
dB
NX8313UD
REFERENCE
Document Name
Opto-Electronics Devices Pamphlet
*1
Document No.
PX10160E
*1 Published by the former NEC Compound Semiconductor Devices, Ltd.
Preliminary Data Sheet PL10645EJ01V0DS
5
NX8313UD
SAFETY INFORMATION ON THIS PRODUCT
Warning
Laser Beam
A laser beam is emitted from this diode during operation.
The laser beam, visible or invisible, directly or indirectly, may cause injury to the eye or loss of
eyesight.
• Do not look directly into the laser beam.
• Avoid exposure to the laser beam, any reflected or collimated beam.
Caution GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the
following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
Caution Optical Fiber
A glass-fiber is attached on the product. Handle with care.
• When the fiber is broken or damaged, handle carefully to avoid injury from the damaged part
or fragments.