NX7363JB-BC

LASER DIODE
NX7363JB-BC
InGaAsP MQW DC-PBH PULSED LASER DIODE MODULE
1 310 nm OTDR APPLICATION
DESCRIPTION
The NX7363JB-BC is a 1 310 nm Multiple Quantum Well (MQW) structure pulsed laser diode DIP module with
single mode fiber and internal thermoelectric cooler.
It is designed for light sources of optical measurement
equipment (OTDR).
FEATURES
• High output power
Pf = 150 mW MIN. @ IFP = 1 000 mA, PW = 10 s, Duty = 1%
• Long wavelength
C = 1 310 nm
• Internal thermoelectric cooler, thermistor
• Hermetically sealed 14-pin Dual-In-Line Package
• Single mode fiber pigtail
Document No. PL10661EJ01V0DS (1st edition)
Date Published May 2007 NS CP(N)
NX7363JB-BC
PACKAGE DIMENSIONS (UNIT: mm)
OPTICAL FIBER CHARACTERISTICS
Parameter
Specification
Unit
Mode Field Diameter
9.51
m
Cladding Diameter
1252
m
2
%
1.6
%
0.90.1
mm
1 100 to 1 270
nm
30
mm
1 000 MIN.
mm
Maximum Cladding Noncircularity
Maximum Core/Cladding Concentricity
Outer Diameter
Cut-off Wavelength
Minimum Fiber Bending Radius
Fiber Length
Flammability
2
UL1581 VW-1
Data Sheet PL10661EJ01V0DS
NX7363JB-BC
ORDERING INFORMATION
Part Number
Available Connector
NX7363JB-BC-AZ*
With FC-UPC Connector
*Note Please refer to the last page of this data sheet “Compliance with
EU Directives for Pb-Free RoHS Compliance Information.
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Ratings
Unit
IFP
1.2
A
Reverse Voltage
VR
2.0
V
Cooler Current
IC
1.0
A
Cooler Voltage
VC
2.0
V
Thermistor Current
It
0.5
mA
Thermistor Voltage
Vt
12.0
V
Operating Case Temperature
TC
20 to +65
C
Storage Temperature
Tstg
40 to +70
C
Lead Soldering Temperature
Tsld
260 (10 sec.)
C
Pulsed Forward Current
*1
*1 Pulse conditions: Pulse width (PW) = 10 s, Duty = 1%
Data Sheet PL10661EJ01V0DS
3
NX7363JB-BC
ELECTRO-OPTICAL
specified)
CHARACTERISTICS (T LD = 25C, T C = 20 to +65C, unless otherwise
Parameter
Forward Voltage
Symbol
VFP
Conditions
MIN.
TYP.
MAX.
Unit
CW, IF = 30 mA
2.5
4.0
V
35
65
mA
Threshold Current
Ith
CW
Optical Output Power from Fiber
Pf
IFP = 1 000 mA, *1
150

IFP = 600 mA, *1
90

IFP = 400 mA, *1
40
Center Wavelength
C
RMS, IFP = 400, 600, 1 000 mA, *1
Spectral Width

Rise Time
Fall Time
1 290
mW
1 310
1 330
nm
RMS, IFP = 400, 600, 1 000 mA, *1
3.0
7.0
nm
tr
10-90%
1.0
2.0
ns
tf
90-10%
1.4
2.0
ns
*1 PW = 10 s, Duty = 1%
ELECTRO-OPTICAL CHARACTERISTICS
(Applicable to Thermistor and TEC: T LD = 25C, T C = 20 to +65C, unless otherwise specified)
Parameter
Symbol
Conditions
TYP.
MAX.
Unit
9.5
10.0
10.5
k
3 350
3 450
3 550
K
Thermistor Resistance
R
B Constant
B
Cooler Current
IC
T = 40C
0.6
0.8
A
Cooler Voltage
VC
T = 40C
1.1
1.5
V
Cooling Capacity
T
*1
TLD = 25C
MIN.
IC = 0.8 A
*1 T = TC – TLD
4
Data Sheet PL10661EJ01V0DS
40
C
NX7363JB-BC
TYPICAL CHARACTERISTICS (T C = 25C, unless otherwise specified)
Remark The graphs indicate nominal characteristics.
Data Sheet PL10661EJ01V0DS
5
NX7363JB-BC
REFERENCE
Document Name
Opto-Electronics Devices Pamphlet
6
Document No.
PX10160E
Data Sheet PL10661EJ01V0DS
NX7363JB-BC
SAFETY INFORMATION ON THIS PRODUCT
Warning
Laser Beam
A laser beam is emitted from this diode during operation.
The laser beam, visible or invisible, directly or indirectly, may cause injury to the eye or loss of
eyesight.
• Do not look directly into the laser beam.
• Avoid exposure to the laser beam, any reflected or collimated beam.
Caution GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the
following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
Caution Optical Fiber
A glass-fiber is attached on the product. Handle with care.
• When the fiber is broken or damaged, handle carefully to avoid injury from the damaged part
or fragments.