A Product Line of Diodes Incorporated ZXTR2005Z 100V INPUT, 5V 30mA REGULATOR TRANSISTOR Description Features The ZXTR2005Z monolithically integrates a transistor, Zener diode Series Linear Regulator Using Emitter-Follower Stage and resistor to function as a high voltage linear regulator. The device Input Voltage = 10 to 100V regulates with a 5V nominal output at 15mA. It is designed for use in Output Voltage = 5V ± 10% high voltage applications where standard linear regulators cannot be Fully Integrated Into a SOT89 Package used. This function is fully integrated into a SOT89 package, Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2) minimizing PCB area and reducing number of components when Halogen and Antimony Free. “Green” Device (Note 3) compared with a multi-chip discrete solution. Qualified to AEC-Q101 Standards for High Reliability Applications Mechanical Data Supply voltage regulation in: Networking Telecom Case: SOT89 Case Material: Molded Plastic. “Green” Molding Compound UL Flammability Rating 94V-0 Power Over Ethernet (PoE) Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.052 grams (approximate) SOT89 Pin Name VIN GND VOUT Top View Internal Device Schematic Pin Function Input Supply Power Ground Voltage Output Top View Pin-Out Ordering Information (Note 4) Product ZXTR2005Z-7 ZXTR2005Z-13 Notes: Package SOT89 SOT89 Marking 1T3 1T3 Reel size (inches) 7 13 Tape width (mm) 12 12 Quantity per reel 1,000 2,500 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen and Antimony free, "Green" and Lead-Free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com/products/packages.html. Marking Information 1T3 = Product Type Marking Code ZXTR2005Z Document number: DS36231 Rev. 3 - 2 1 of 7 www.diodes.com December 2013 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTR2005Z Absolute Maximum Ratings (Voltage relative to GND, @TA = +25°C, unless otherwise specified.) Characteristic Input Voltage Continuous Input & Output Current Peak Pulsed Input & Output Current Maximum Voltage applied to VOUT Symbol Value VIN -0.3 to 100 Unit V IIN, IOUT 350 mA IIM, IOM 2 A VOUT(max) 11 V Symbol Value Unit IOUT 38 mA IOM 740 150 mA Maximum Current at VIN = 48V (@TA = +25°C, unless otherwise specified.) Characteristic Continuous Output Current (Note 7) Pulsed Output Current (Note 8) (Note 9) Thermal Characteristics Characteristic Symbol (Note 5) Power Dissipation (Note 6) (Note 5) Thermal Resistance, Junction to Ambient (Note 6) Thermal Resistance, Junction to Lead (Note 10) Thermal Resistance, Junction to Case (Note 10) Recommended Operating Junction Temperature Range Maximum Operating Junction and Storage Temperature Range Value 1.7 0.89 59 112 20 15.7 -40 to +125 -65 to +150 PD RθJA RθJL RθJC TJ TJ, TSTG Unit W °C/W °C °C ESD Ratings (Note 11) Characteristics Electrostatic Discharge – Human Body Model Electrostatic Discharge – Machine Model Notes: Symbols ESD HBM ESD MM Value 4,000 400 Unit V V JEDEC Class 3A C 5. For a device mounted with the exposed VIN pad on 50mm x 50mm 1oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured under still air conditions whilst operating in steady-state. 6. Same as note 5, except mounted on 15mm x 15mm 1oz copper. 7. Same as note 5, whilst operating at VIN = 48V. Refer to Safe Operating Area for other Input Voltages. 8. Same as note 5, except measured with a single pulse width = 100µs and VIN = 48V. 9. Same as note 5, except measured with a single pulse width = 10ms and VIN = 48V. 10. RθJL = Thermal resistance from junction to solder-point (on the exposed VIN pad). RθJC = Thermal resistance from junction to the top of case. 11. Refer to JEDEC specification JESD22-A114 and JESD22-A115. ZXTR2005Z Document number: DS36231 Rev. 3 - 2 2 of 7 www.diodes.com December 2013 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTR2005Z Max Power Dissipation (W) 2.5 TJ = 125°C = 150°C 2.0 1.5 50mm x 50mm 1oz Cu 1.0 0.5 15mm x 15mm 1oz Cu 0.0 0 25 50 75 100 125 150 Ambient temperature (°C) Continuous Output Current (mA) Thermal Characteristics and Derating Information Steady state D.C. TA = 25°C TJ 125°C 15mm x 15mm 1oz Cu 100 50mm x 50mm 1oz Cu 10 10 Max Power Dissipation (W) Thermal Resistance (°C/W) 50mm x 50mm 1oz Cu 50 D=0.5 40 30 D=0.2 Single Pulse 20 D=0.05 10 D=0.1 0 100µ 1m 10m 100m 1 10 100 1k D=0.2 Single Pulse D=0.05 1 10 100 1k 10k Max Power Dissipation (W) Thermal Resistance (°C/W) 60 0 100µ 1m 10m 100m 50mm x 50mm 1oz Cu 10 1 100µ 1m 10m 100m 1 10 100 1k 50 Single Pulse TA = 25°C TJ 125°C 10 15mm x 15mm 1oz Cu 1 0.1 100µ 1m 10m 100m 1 10 100 1k Pulse Width (s) Transient Thermal Impedance Document number: DS36231 Rev. 3 - 2 90 100 TJ 125°C Pulse Width (s) ZXTR2005Z 80 Pulse Power Dissipation D=0.5 D=0.1 70 Pulse Width (s) 15mm x 15mm 1oz Cu 20 60 Single Pulse TA = 25°C 10k 120 40 50 50 Transient Thermal Impedance 80 40 Safe Operating Area Pulse Width (s) 100 30 Input Voltage (V) Derating Curve 60 20 Pulse Power Dissipation 3 of 7 www.diodes.com December 2013 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTR2005Z Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Symbol Min Typ Max Unit VOUT 4.5 5.0 5.5 V VOUT — 195 300 mV VOUT/T — 7.0 — mV/°C Load Regulation (Notes 12 & 14) VOUT — -185 -205 -350 -400 mV Minimum Value of Input Voltage Required to Maintain Line Regulation VIN(MIN) 10 — — V — IQ — — 260 550 500 900 µA VIN = 48V, IOUT = 10µA VIN = 100V, IOUT = 10µA Vin/Vout — 45 — dB COUT = 100nF, IOUT = 15mA, VOUT = 5V, VIN = 10 to 100V, f = 100Hz Output Voltage (Note 12) Line Regulation (Notes 12 & 13) Temperature Coefficient Quiescent Current Power Supply Rejection Ratio Notes: Test Condition VIN = 48V, IOUT = 15mA VIN = 10 to 72V, IOUT = 15mA TJ = -40°C to +125°C VIN = 48V, IOUT = 15mA IOUT = 0.1 to 30mA, VIN = 48V IOUT = 0.1 to 100mA, VIN = 48V 12. Measured under pulsed conditions. Pulse width ≤ 300μs. Duty cycle ≤ 2%. 13. Line regulation VOUT = VOUT(@ VIN = 72V) – VOUT(@ VIN = 10V) 14. Load regulation VOUT = VOUT(@ IOUT = 30mA) – VOUT(@ IOUT = 0.1mA) VOUT = VOUT(@ IOUT = 100mA) – VOUT(@ IOUT = 0.1mA) Typical Application Circuit Pin Functions Pin Name Pin Function Notes VIN Input Supply To maintain output regulation the input voltage can vary from 10V to 100V with respect to the GND pin. It is recommended to connect a 1µF capacitor to GND. GND Power Ground VOUT Voltage Output ZXTR2005Z Document number: DS36231 Rev. 3 - 2 This pin should be tied to the system ground. Outputs a regulated 5V. It is recommended to connect a 10µF capacitor to GND. Minimum of 10µA must be drawn from VOUT to maintain regulation. The pin can be pulled high to a maximum of 11V with respect to ground. 4 of 7 www.diodes.com December 2013 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTR2005Z 70 VOUT 60 50 VIN 40 30 20 10 -5µ 0 5µ 10µ Time (s) 5.2 5.1 5.0 4.9 4.8 VIN =18 to 48V 4.7 IOUT= 15mA 4.6 Slew Rate=5V/s 4.5 COUT = 100nF 4.4 4.3 4.2 15µ 20µ 5.6 80 5.4 70 5.2 50 5.0 4.8 Slew Rate=1A/s COUT = 100nF VIN =10V 4.6 4.4 IOUT 4.2 4.0 -4µ 400 T J = 125°C 200 T J = 85°C T J = 100°C T J = 25°C 0 -200 T J = -40°C -400 -600 10 20 30 40 50 60 70 80 0 2µ 4µ 6µ 90 100 VIN = 48V 600 8µ 0 10µ T J = 125°C 400 T J = 100°C 200 T J = 85°C 0 -200 -400 T J = 25°C T J = -40°C -600 0.1 20 40 60 80 100 IOUT Output Current (mA) Line Regulation (Note 15) Load Regulation (Note 16) 700 800 VIN = 48V 600 IQ Quiescent Current (A) VOUT Output Voltage (mV) 10 800 VIN Input Voltage (V) Notes: 20 Load transient response VOUT Output Voltage (mV) VOUT Output Voltage (mV) 600 -2µ 30 Time (s) IOUT = 15mA 800 40 IOUT = 0 to 30mA Line transient response 1000 60 VOUT IOUT Output Current (mA) VIN Input Voltage (V) 80 VOUT Output Voltage (V) Typical Electrical Characteristics (@TA = +25°C, unless otherwise specified.) 600 IOUT = 15mA 400 IOUT = 10µA T J = 100°C 500 T J = 125°C T J = 85°C 400 200 300 0 T J = 25°C T J = -40°C 200 -200 100 -400 -600 -40 -25 0 25 50 75 100 125 0 10 20 30 40 50 60 70 80 Junction temperature (°C) VIN Input Voltage (V) Temperature Coefficient (Note 17) Quiescent Current 90 100 15. Line regulation ∆VOUT = VOUT – VOUT(@ VIN = 10V, IOUT = 15mA, TJ = +25°C) 16. Load regulation ∆VOUT = VOUT – VOUT(@ VIN = 48V, IOUT = 0.1mA, TJ = +25°C) 17. Temperature Coefficient ∆VOUT = VOUT – VOUT(@ VIN = 48V, IOUT = 15mA, TJ = +25°C) ZXTR2005Z Document number: DS36231 Rev. 3 - 2 5 of 7 www.diodes.com December 2013 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTR2005Z Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. D1 0 .20 R0 C 1 SOT89 Dim Min Max A 1.40 1.60 B 0.44 0.62 B1 0.35 0.54 C 0.35 0.44 D 4.40 4.60 D1 1.62 1.83 E 2.29 2.60 e 1.50 Typ H 3.94 4.25 H1 2.63 2.93 L 0.89 1.20 All Dimensions in mm H H E B1 L B e 8° (4X) A D Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. X1 Dimensions Value (in mm) X 0.900 X1 1.733 X2 0.416 Y 1.300 Y1 4.600 Y2 1.475 Y3 0.950 Y4 1.125 C 1.500 X2 (2x) Y1 Y3 Y4 Y2 Y C X (3x) ZXTR2005Z Document number: DS36231 Rev. 3 - 2 6 of 7 www.diodes.com December 2013 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTR2005Z IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2013, Diodes Incorporated www.diodes.com ZXTR2005Z Document number: DS36231 Rev. 3 - 2 7 of 7 www.diodes.com December 2013 © Diodes Incorporated