A Product Line of Diodes Incorporated FMMT717 12V PNP SILICON LOW SATURATION TRANSISTOR IN SOT23 Features Mechanical Data • • • • • • • • • • • • • • • • • BVCEO > -12V IC = -2.5A Continuous Collector Current ICM = -10A Peak Pulse Current Low Saturation Voltage E.g. -17mV Max @ IC = -100mA. RCE(sat) = 72mΩ at 2.5A for a low equivalent on-resistance 625mW power dissipation hFE characterised up to -10A for high current gain hold-up Complementary NPN Type: FMMT617 Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability PPAP capable (Note 4) • Case: SOT23 Case Material: molded plastic, “Green” molding compound UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish – Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight 0.008 grams (approximate) Application • • • • Gate Driving MOSFETs and IGBTs Load switch Battery charging DC-DC conversion SOT23 E C C B B E Top View Device Symbol Top View Pin-Out Ordering Information (Notes 4 & 5) Product FMMT717TA FMMT717QTA Notes: Compliance AEC-Q101 Automotive Marking 717 717 Reel size (inches) 7 7 Tape width (mm) 8 8 Quantity per reel 3,000 3,000 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen and Antimony free,"Green" and Lead-Free. 3. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally the same, except where specified. 5. For packaging details, go to our website at http://www.diodes.com Marking Information 717 FMMT717 Document Number: DS33116 Rev. 5 - 2 717 = Product type Marking Code 1 of 7 www.diodes.com October 2012 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT717 Maximum Ratings (@TA = +25°C, unless otherwise specified.) Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Base Current Symbol VCBO VCEO VEBO IC ICM IB Value -12 -12 -7 -2.5 -10 -500 Unit V V V A A mA Value 625 806 200 155 194 -55 to +150 Unit mW mW °C/W °C/W °C/W °C Thermal Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Power Dissipation (Note 6) Power Dissipation (Note 7) Thermal Resistance, Junction to Ambient (Note 6) Thermal Resistance, Junction to Ambient (Note 7) Thermal Resistance, Junction to Leads (Note 8) Operating and Storage Temperature Range Symbol PD PD RθJA RθJA RθJL TJ, TSTG ESD Ratings (Note 9) Characteristic Electrostatic Discharge - Human Body Model Electrostatic Discharge - Machine Model Notes: Symbol ESD HBM ESD MM Value ≥ 8,000 ≥ 400 Unit V V JEDEC Class 3B C 6. For a device surface mounted on 25mm X 25mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions; the device is measured when operating in a steady-state condition. 7. Same as note 6, except the device is measured at t ≤ 5 sec. 8. Thermal resistance from junction to solder-point (at the end of the collector lead). 9. Refer to JEDEC specification JESD22-A114 and JESD22-A115. FMMT717 Document Number: DS33116 Rev. 5 - 2 2 of 7 www.diodes.com October 2012 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT717 220 200 T amb=25°C 180 160 140 120 D=0.5 100 80 D=0.1 60 D=0.2 40 D=0.05 20 Single Pulse 0 100µ 1m 10m 100m 1 10 0.7 100 1k Pulse Width (s) Max Power Dissipation (W) Thermal Resistance (°C/W) Thermal Characteristics and Derating information 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0 25 50 75 100 125 150 175 Temperature (°C) Derating Curve Transient Thermal Impedance Maximum Power (W) 100 Single Pulse T amb=25°C 10 1 0.1 100µ 1m 10m 100m 1 10 100 1k Pulse Width (s) Pulse Power Dissipation FMMT717 Document Number: DS33116 Rev. 5 - 2 3 of 7 www.diodes.com October 2012 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT717 Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 10) Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current Collector Emitter Cutoff Current Static Forward Current Transfer Ratio (Note 10) Symbol BVCBO BVCEO BVEBO ICBO IEBO ICES Min -12 -12 -7 - Typ -35 -25 -8.5 - Max -100 -100 -100 475 450 275 100 70 - hFE 300 300 180 60 45 - -10 -100 -110 -180 -17 -140 -170 -220 mV - Unit V V V nA nA nA - Collector-Emitter Saturation Voltage (Note 10) VCE(sat) Base-Emitter Turn-On Voltage (Note 10) Base-Emitter Saturation Voltage (Note 10) Output Capacitance VBE(on) VBE(sat) Cobo - -0.8 -0.9 21 -1.0 -1.0 30 V V pF Transition Frequency fT 80 110 - MHz Turn-On Time Turn-Off Time ton toff - 70 130 - ns ns Notes: Test Condition IC = -100µA IC = -10mA IE = -100µA VCB = -10V VEB = -5V VCE = -10V IC = -10mA, VCE = -2V IC = -100mA, VCE = -2V IC = -2.5A, VCE = -2V IC = -8A, VCE = -2V IC = -10A, VCE = -2V IC = -0.1A, IB = -10mA IC = -1A, IB = -10mA IC = -1.5A, IB = -50mA IC = -2.5A, IB = -50mA IC = -2.5A, VCE = -2V IC = -2.5A, IB = -50mA VCB = -10V, f = 1MHz VCE = -10V, IC = -50mA, f = 100MHz VCC = -6V, IC = -2A IB1 = IB2 = 50mA 10. Measured under pulsed conditions. Pulse width ≤ 300µs. Duty cycle ≤ 2% FMMT717 Document Number: DS33116 Rev. 5 - 2 4 of 7 www.diodes.com October 2012 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT717 Typical Electrical Characteristics (@TA = +25°C, unless otherwise specified.) FMMT717 Document Number: DS33116 Rev. 5 - 2 5 of 7 www.diodes.com October 2012 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT717 Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. A B C H K M K1 D F J L G SOT23 Dim Min Max Typ A 0.37 0.51 0.40 B 1.20 1.40 1.30 C 2.30 2.50 2.40 D 0.89 1.03 0.915 F 0.45 0.60 0.535 G 1.78 2.05 1.83 H 2.80 3.00 2.90 J 0.013 0.10 0.05 K 0.903 1.10 1.00 K1 0.400 L 0.45 0.61 0.55 M 0.085 0.18 0.11 0° 8° α All Dimensions in mm Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. Y Z C X FMMT717 Document Number: DS33116 Rev. 5 - 2 Dimensions Value (in mm) Z 2.9 X 0.8 Y 0.9 2.0 C 1.35 E E 6 of 7 www.diodes.com October 2012 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT717 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2012, Diodes Incorporated www.diodes.com FMMT717 Document Number: DS33116 Rev. 5 - 2 7 of 7 www.diodes.com October 2012 © Diodes Incorporated