Bussmann® Printed Circuit Board Fuseholders HB Series For ⁄Ω¢∑ ≈ 1⁄Ω¢∑ and 5mm ≈ 20mm Fuses Model Fuse Size Cat. No. (Carrier & Body) Agency Listings Horizontal Mount Dimensions (±.005∑, ±.13mm) 0.444 " (11.2mm) ⁄Ω¢∑ ≈ 1⁄Ω¢∑ 5mm ≈ 20mm Vertical Mount With Stability Pins HBH-I U.L. CSA VDE SEMKO 1.77" (45.0mm) 0.460" 0.469" 0.490" (11.1mm) (12.0mm) (12.0mm) 0.050" Dia. 3 Holes (1.3mm) 0.600" 0.700" 0.200" (5.1mm) 0.240" 0.040" (1.0mm) (6.1mm) HBH-M Mounting Dimensions (17.8mm) 0.250" 0.135"min (3.4mm min) (15.2mm) (6.4mm) Panel PC Board 0.200" (5.0mm) U.L. CSA VDE SEMKO HBV-M 0.510" 0.100" Dia. 4 Holes 0.200" (2.54mm) (5.0mm) (13.0mm) 0.531" (13.5mm) 1.855" (47.0mm) HBW 5mm ≈ 20mm HBV-I HBV ⁄Ω¢∑ ≈ 1⁄Ω¢∑ 0.400" 0.050" Dia. 2 Holes (1.3mm) Panel Vertical Mount Without Stability Pins 5mm ≈ 20mm HBW-I U.L. CSA VDE SEMKO PC Board 0.531" 0.040" (13.5mm) (1.05mm) ⁄Ω¢∑ ≈ 1⁄Ω¢∑ 0.050" Dia. 2 Holes (1.3mm) 0.580" (14.9mm) (10.0mm) Panel 0.400" (10.0mm) PC Board HBW-M NOTE: Carriers do not fit panel-mounted fuseholders. Catalog Symbol: HBH, HBV, HBW Specifications Temperature Rating (RTI): Body: 150°C Knob: 130°C PC Board Fuseholders Electrical Ratings: U.L. — 16A @ 250V; CSA — 12A @ 250V; VDE — 10A @ 250V; SEMKO — 10A @ 250V; (CSA) Insulation resistance — 10,000 megohm at 500 Vdc. Contact resistance — less than 0.005 ohms @ 20mV. Dielectric strength — over 200 volts/mil. Molded Material: High dielectric molded phenolic with a U.L. 94 VO flammability rating. Fuse Carrier & Knob: Spring-loaded, bayonet type. Brass tin-plated. Screwdriver slotted. Mounting: “Kicked” terminals (all models) and stabilizer pins on HBV model for increased stability. Environmental: Ambient temperature — (–40°C to +85°C). Agency Approvals: U.L. Recognized, Guide IZLT2, File E14853; CSA Certified, Class 6225-01, File 47235 VDE — 41421; SEMKO — 9308147 (HBH, HBV) 9222106 (HBW) CE logo denotes compliance with European Union Low Voltage Directive (50-1000 Vac, 75-1500 Vdc). Refer to BIF document #8002 or contact Bussmann Application Engineering at 636-527-1270 for more information. 1-18-00 N99207 Rev. A General Information: • Both vertical and horizontal mounting features. • Fuse carriers for 5mm ≈ 20mm and ⁄Ω¢∑ ≈ 1⁄Ω¢∑ fuses. Color coded for easy identification: gray for ⁄Ω¢∑ fuses; black for 5mm fuses. • Fuse carriers are interchangeable. • “Kicked” terminals for optimum wave-soldering. Stabilizes holder for consistent high quality soldering with in-wide tolerance PC board hole tooling. • Anti-wicking terminals. • The line-side terminal is an exclusive closed element design. • Prevents solder flux from “wicking-up” into the holder body. • Corner pins integral to the HBV holder body give additional stability to holders for wave-soldering and reduce mechanical stress that might be imposed on contact pins during service. Individual Components — PC Board Fuseholders Fuseholder Body Only Cat. No. BK/HBH BK/HBV BK/HBW Fuseholder Carrier Only BK/FBI BK/FBM Body Type Horizontal Mount Vertical Mount w/Stability Pins Vertical Mount w/o Stability Pins ⁄Ω¢∑ ≈ 1⁄Ω¢∑ 5mm ≈ 20mm Form No. HB Series Page 1 of 1 BIF Doc #2118