Bussmann® 1BS101 Modular Fuseblocks 0-600V, 100 Amps Mounting Dimensions mm (inches) Catalog Symbol: 1BS101 Voltage Rating: 600V Current Rating: 100A Base: Molded black phenolic, 150°C Mounting Studs: Zinc-plated steel ⁄Ω¢∑ - 20 ≈ ⁄Ω™∑ hex head bolt Nut: Zinc-plated steel Washer: Zinc-plated steel ⁄Ω¢∑ Belleville washer Connector: Tin-plated aluminum Wire Range: Single #2/0 through single #14AWG Wire Types: Copper or aluminum Stranded or solid Withstand Rating: 200,000A RMS. SYM. or the interrupting rating of the fuse used, whichever is smaller. Dovetail Interlock: Dovetail interlock feature on each side of the base allows mounting multiple poles adjacent to one another. Torque Requirements: Conductor Set Screw: 120 lbs-in Fuse Mounting Bolt: 70 lbs-in Agency Approvals: U.L. Recognized, Guide No. IZLT2, File No. E14853 CSA Certified, Class 6225-01, File 47235 Catalog No. FWA 70A-100A FWH 35B-60B FWH 70B-100B FWX 35A-60A FWX 70A-100A KAC 1-30 KAC 35-60 KAC 70-100 KBC 35-60 KBC 70-100 LPJ 70SP-100SP JJS 70-100 JKS 70-100 80-100L14C 80-100L09C “A” 49.3 58.9 72.4 59.4 59.7 63.5 88.9 105.7 88.9 93.0 95.5 59.9 96.3 89.9 112.0 “B” (1.94) (2.32) (2.85) (2.34) (2.35) (2.50) (3.50) (4.16) (3.50) (3.66) (3.76) (2.36) (3.79) (3.54) (4.41) 16.0 25.6 39.1 26.1 26.4 30.2 55.6 72.3 55.6 59.6 62.2 26.6 62.9 56.6 78.7 (0.63) (1.01) (1.54) (1.03) (1.04) (1.19) (2.19) (2.85) (2.19) (2.35) (2.45) (1.05) (2.48) (2.23) (3.10) “C” 95.4 (3.75) 104.9 (4.13) 118.3 (4.66) 105.4 (4.15) 105.6 (4.16) 109.4 (4.31) 134.8 (5.31) 151.6 (5.97) 134.8 (5.31) 138.9 (5.47) 141.4 (5.57) 105.9 (4.17) 142.2 (5.60) 135.8 (5.35) 157.9 (6.22) Dimensions CL 44.7 (1.76) BLOCK NO. 1BS101 This block is furnished with an interlocking dovetail feature as shown. When mounting multiple fuseblocks side by side, center-tocenter distance between mounting holes each pole is 44.58 (1.755). CL 11.4 CLEARANCE FOR SCREW HEAD (.45) Maximum fuse blade width is 25.40 (1.000). 5.1 X 7.7 MOUNTING HOLE SLOT FOR #10 SCREW (.20) (.30) INTERLOCKING DOVETAIL TAB 11.2 (.44) 'A' REF. 16.8 (.66) 22.4 (.88) 10.4 (.41) 50.8 (2.00) 34.8 (1.37) 26.7 (1.05) 10.4 (.41) 7.1 (.28) 39.62 (1.560) 7.6 (.30) 5.1 (.20) 'B' REF. 39.62 (1.560) MOUNTING SURFACE 6.4 (.25) ANTI-ROTATION PIN 3.3 (.13) 9.4 (.37) 44.5 (1.75) 'C' REF. MOUNTING HOLE ARRANGEMENT 39.62 (1.560) 5.16 DIA. (.203) 39.62 (1.560) 9.53 DIA. (.375) CE logo denotes compliance with European Union Low Voltage Directive (50-1000 Vac, 75-1500 Vdc). Refer to BIF document #8002 or contact Bussmann Application Engineering at 314-527-1270 for more information. The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-16-98 SB98107 Rev. A Form No. 1BS101 Page 1 of 1 BIF Doc #1206