HALOGEN 30 Volt DC Radial Leaded, PolyTron™ PTC Devices Pb HF FREE PolyTron™ PTR030V Series Agency Information • cURus: Recognized Card: File E343021 (Ihold 0.9-9A) • TUV File: J 50194729 Part Number System/Ordering PT R 030V 0160 -TR PolyTron™ PTC Device Series Radial Leaded Maximum Voltage Current Holding (Ihold) Tape and Reel Packaging and Lead Type Code Lead Codes: TR & BK - Straight Leads, TR1 & BK1 - Kinked Leads TR & TR1 On Reels • 0.90-1.60A - 3000 devices • 1.85-3.00A - 2000 devices • 4.00-9.00A - 1000 devices Radial Leaded Device Description • • • • • • • • PolyTron™ radial leaded thru-hole PTC device Maximum 30 volts Current ratings from 0.90 to 9.00 amps Fast time-to-trip Low resistance Halogen free Lead free RoHS compliant BK & BK1 In Poly Bags • 0.90-1.35A - 1,000 devices • 1.60-6.00A - 500 devices • 7.00-9.00A - 250 devices Applications • • • • • • • Medical equipment White goods Industrial power transmission Telecommunications Computers and peripherals Consumer and automotive electronics Rechargeable battery packs Specifications Catalog Number PTR030V0090 PTR030V0110 PTR030V0135 PTR030V0160 PTR030V0185 PTR030V0250 PTR030V0300 PTR030V0400 PTR030V0500 PTR030V0600 PTR030V0700 PTR030V0800 PTR030V0900 Notes: 0111 Vmax (Vdc) 30 30 30 30 30 30 30 30 30 30 30 30 30 Imax (Amps) 40 40 40 40 40 40 40 40 40 100 100 100 100 Ihold @23°C (Amps) 0.90 1.10 1.35 1.60 1.85 2.50 3.00 4.00 5.00 6.00 7.00 8.00 9.00 Itrip @23°C (Amps) 1.80 2.20 2.70 3.20 3.70 5.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 Pd Typ. (W) 0.6 0.7 0.8 0.9 1.0 1.2 2.0 2.5 3.0 3.5 3.8 4.0 4.2 Time to Trip (Max.) (Amps) (Sec) 4.50 5.90 5.50 6.60 6.75 7.30 8.00 8.00 9.25 8.70 12.50 10.30 15.00 10.80 20.00 12.70 25.00 14.50 30.00 16.00 35.00 17.50 40.00 18.80 45.00 20.00 Resistance (Ω) Agency Initial (Ri) Post Trip (R1) Information Min. Max. Max. cURus TUV 0.070 0.120 0.22 X X 0.050 0.100 0.17 X X 0.040 0.080 0.13 X X 0.030 0.070 0.11 X X 0.030 0.060 0.09 X X 0.020 0.040 0.07 X X 0.020 0.050 0.08 X X 0.010 0.030 0.05 X X 0.010 0.030 0.05 X X 0.005 0.020 0.04 X X 0.005 0.020 0.03 X X 0.005 0.013 0.02 X X 0.005 0.010 0.02 X X Ihold – Hold current: Maximum current device will pass without interruption in 23°C still air. Itrip – Trip current: Minimum current that will switch the device from low resistance to high resistance in 23°C still air. Vmax: Maximum continuous voltage device can withstand without damage at rated current. Imax: Maximum fault current device can withstand without damage at rated voltage. Pd: Power dissipated from device when in the tripped state in 23°C still air. Ri (min.): Minimum resistance of device as supplied at 23°C unless otherwise specified. Ri (max.): Maximum resistance of device as supplied at 23°C unless otherwise specified. R1 (max.): Maximum resistance of device when measured one hour post reflow (SMD) or one hour post trip (radial-leaded device) at 23°C unless otherwise specified. BU-SB11019 Page 1 of 4 Data Sheet 4400 Dimensions - mm Part Number PTR030V0090 PTR030V0110 PTR030V0135 PTR030V0160 PTR030V0185 PTR030V0250 PTR030V0300 PTR030V0400 PTR030V0500 PTR030V0600 PTR030V0700 PTR030V0800 PTR030V0900 A Max. 7.4 7.4 8.9 8.9 10.2 11.4 11.4 14.0 14.0 16.5 19.1 21.6 24.1 B Max Lead Type Straight Kink (-TR) (-TR1) 12.2 12.2 14.2 14.2 13.5 13.5 15.2 15.2 15.7 15.7 18.3 20.5 17.3 21.8 20.1 24.6 24.9 26.6 24.9 29.4 26.7 31.2 29.2 33.7 29.7 34.2 C 5.0±0.8 5.0±0.8 5.0±0.8 5.0±0.8 5.0±0.8 5.0±0.8 5.0±0.8 5.0±0.8 10.0±0.8 10.0±0.8 10.0±0.8 10.0±0.8 10.0±0.8 D Min. 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 E Max. 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 F 0.5±0.02 0.5±0.02 0.5±0.02 0.5±0.02 0.5±0.02 0.5±0.02 0.8±0.02 0.8±0.02 0.8±0.02 0.8±0.02 0.8±0.02 0.8±0.02 0.8±0.02 Style 1 Figure/ Lead Style Straight Kink TR TR1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 Style 2 Time-to-Trip Curves at 23°C A 1000 B C D E F H I G K L MN A:PTR030V0090 B:PTR030V0110 C :PTR030V0135 D :PTR030V0160 100 E:PTR030V0185 T IM E IN SEC O N D S F :PTR030V0250 H :PTR030V0300 I:PTR030V0400 J :PTR030V0500 10 K:PTR030V0600 L:PTR030V0700 M :PTR030V0800 N :PTR030V0900 1 0 .1 0 .0 1 0 .1 0111 BU-SB11019 1 F au lt Cu rre n t (A) 10 Page 2 of 4 100 Data Sheet 4400 Thermal Derating Curve P erc entage of D erated C urrent 180.0 160.0 140.0 120.0 100.0 80.0 60.0 40.0 20.0 0.0 -40 -20 0 20 40 Tem perature (°C) Recommended Wave Solder Profile. P re h e a tin g So ld e rin g 60 Environmental Specifications Characteristic Operating Temperature Range Surface Temperature Trip State Thermal Shock Co o lin g 260°C max T e m p e ra ture No te 2 Solvent Resistance Humidity Age Test No te 3 130 ± 200°C No te 1 T am b t 3 0 ~9 0 se c Notes: <1 se c 80 Storage Temperature Range Storage Duration Storage Relative Humidity Storage Conditions Value -40°C to +85°C 125°C max. +85°C to -40°C , 10 cycles, 5% typical resistance change MIL-STD-202 Method 215, no change +85°C, 85% R.H., 1000 hours ±5% typical resistance change. Specified temperature (23°C ± 3°C) -10°C to +40°C One year < _75% Keep away from corrosive atmosphere and sunlight <1 0 sec T im e 1. (1-3)°C/sec 2. Approximately 200°C/sec 3. 5°C/sec Maximum Recommended Reworking Conditions with Soldering Iron Material Composition • Soldering Iron Tip Temperature: 360°C max. • Solder Time: 3 seconds max. • Distance from Thermistor: 2mm min. • Lead material: - PTR030V0090-PTR030V0250 Tin-plated copper clad steel - PTR030V0300-PTR030V0900 Tin-plated copper • Insulating material: Cured epoxy resin meeting UL 94V0 requirements 0111 BU-SB11019 Page 3 of 4 Data Sheet 4400 Packaging/Taping Specifications Description Sprocket hole pitch Ordinate to adjacent component lead PTR030V0090~PTR030V0300 Ordinate to adjacent component lead PTR030V0400 Ordinate to adjacent component lead PTR030V0500~PTR030V0900 Device pitch PTR030V0090~PTR030V0300 Device pitch PTR030V0400~PTR030V0900 Lead spacing Carrier tape width Top distance between tape edges Hold-down tape width Sprocket hole position Abscissa to top PTR030V0090~PTR030V0300 Abscissa to top PTR030V0400~PTR030V0900 Abscissa to plane (straight lead) Abscissa to plane (kinked lead) Sprocket hole diameter Lead protrusion Tape thickness Body lateral deviation Body tape plane deviation Reel width Reel diameter Arbor hole diameter Core diameter * See Dimensions table. Figure 1 - PTR030V0090-PTR030V0400 IEC Mark P0 Dimension Tolerance (mm) (mm) 12.7 0.3 P1 3.6 1.0 P1 3.45 1.0 P1 P P C W W0 W1 W2 H1 H1 H H0 D0 L1 t Δh Δp W3 7.3 12.7 25.4 * 18 3.0 12 9.0 32.2 47.5 18.0 16.0 4 1 0.9 0 0 56 340 31 80 1.0 1.0 1.0 -1.0 Max. 1.0 +0.75/-0.5 Max. Max. +2/-0 ±0.5 ±0.2 Max. Max. ±1.0 ±0 1.3 Max. ±10 ±1 Min. n0 n Figure 2 - PTR030V0500-PTR030V0900 Reel Specifications The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Life Support Policy: Cooper Bussmann does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. © 2011 Cooper Bussmann www.cooperbussmann.com 0111 BU-SB11019 Page 4 of 4 Data Sheet 4400