AZ9375 SENSITIVE SUBMINIATURE RELAY FEATURES • • • • • • • Extremely small footprint Thin vertical profile only 0.275" (7 mm) wide Dielectric strength 4000 Vrms Type ‘F’ 155°C wire standard 10 Amp switching capability UL, CUR file E44211 TUV R50284629 CONTACTS Arrangement SPST (1 Form A) Ratings Resistive load: Max. switched power: 150 W or 1250 VA Max. switched current: 10 A Max. switched voltage: 30 VDC or 277 VAC Rated Load UL / CSA 10 A at 125 VAC, Res., 100k cycles, 90°C 10 A at 30 VDC, Res., 100k cycles, 90°C 5 A at 250 VAC, Res., 100k cycles, 90°C 1/10 HP at 250 VAC, 100k cycles, 85°C 1.4 FLA / 7.5 LRA at 250 VAC, 100k cycles, 85°C GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 5 million operations 1 X 105 at 5 A, 250 VAC Res. Operate Time (typical) 10 ms at nominal coil voltage Release Time (typical) 4 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 750 Vrms between open contacts (at sea level for 1 min.) 4000 Vrms coil to contact Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Silver nickel Dropout Greater than 10% of nominal coil voltage < 100 milliohms initially (at 6 V, 1 A, voltage drop method) Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 90°C (194°F) -40°C (-40°F) to 105°C (221°F) Vibration 0.062" (1.5 mm) DA at 10–55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. TUV 5 A at 250 VAC, Res., 100k cycles, 90°C 10A at 125 VAC, 30 VDC, Res., 100k cycles, 90°C Material Resistance COIL Power At Pickup Voltage (typical) 113 mW Max. Continuous Dissipation 338 mW at 20°C (68°F) ambient Max. Solder Temp. 270°C (518°F) Temperature Rise 40°C (104°F) at nominal coil voltage Max. Solder Time 5 seconds Max. 105°C (221°F) Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 4 grams Temperature NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 6/17/14 AZ9375 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 3 Must Operate VDC 2.25 Max Continuous VDC 3.9 Coil Resistance ± 10% 45 ORDER NUMBER AZ9375-1A-3DF 5 3.75 6.5 125 AZ9375-1A-5DF 6 4.50 7.8 180 AZ9375-1A-6DF 9 6.75 11.7 405 AZ9375-1A-9DF 12 9.00 15.6 720 AZ9375-1A-12DF 18 13.50 23.4 1620 AZ9375-1A-18DF 24 18.00 31.2 2800 AZ9735-1A-24DF * Add suffix “E” after ‘D’ for sealed version. MECHANICAL DATA Standard Pinning Outline Dimensions 0.185 [4.7] PC BOARD LAYOUT 0.275 [7.0] 0.803 [20.4] 0.453 [11.5] .275 [7.0] 0.59 [15.0] Viewed toward terminals 0.126 [3.2] WIRING DIAGRAM 0.009 [0.24] 0.012 [0.3] 0.453 [11.5] .275 [7.0] 0.02 [0.5] 0.02 [0.5] 0.007 [0.18] 0.185 [4.7] Viewed toward terminals ** Attention: Grid is not 0.1 inch (2.54 mm). ** 6/17/14