AZ936 10 AMP LOW PROFILE POWER RELAY FEATURES • • • • • • • High power switching (2000 VA) High sensitivity, 190 mW pickup Low profile (less than .25" height) SPST (1 Form A) DC coils up to 100 VDC UL file E44211, CSA file 702514 TÜV file BL991234205002 CONTACTS GENERAL DATA Arrangement SPST (1 Form A) Ratings Resistive load: Max. switched power: 240 W, 2000 VA Max. switched current: 10 A Max. switched voltage: 250 VAC/110 VDC Rated Load UL, CSA 10 A at 125 VAC, resistive 8 A at 250/30 VDC, resistive 1/10 HP 125 VAC 1/10 HP 250 VAC TÜV 10 A at 125 VAC, resistive 8 A at 250 VAC, 30 VDC, resistive Material Silver tin oxide Resistance < 100 milliohms initially (6 V, 1 A voltage drop method) COIL Power At Pickup Voltage (typical) 190 mW Max. Continuous Dissipation 1.2 W at 20°C (68°F) Temperature Rise 20°C (36°F) at nominal coil voltage Temperature Max. 115°C (239°F) Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 10 A 120 VAC Res. Operate Time (typical) 10 ms at nominal coil voltage Release Time (typical) 2 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 1500 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms contact to contact Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 5% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-42°F) to 115°C (239°F) Vibration 0.062" DA at 10–55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 5 grams NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 3/14/01W AZ936 RELAY ORDERING DATA COIL SPECIFICATIONS SPST-NO (1 Form A) Nominal Coil VDC 3 Must Operate VDC 2.4 ORDER NUMBER Max. Continuous VDC 3.9 Coil Resistance ±10% 30 Unsealed Sealed AZ936–1A–3D AZ936–1A–3DE 5 4.0 6.5 83 AZ936–1A–5D AZ936–1A–5DE 6 4.8 7.8 120 AZ936–1A–6D AZ936–1A–6DE 9 7.2 11.7 270 AZ936–1A–9D AZ936–1A–9DE 12 9.6 15.6 480 AZ936–1A–12D AZ936–1A–12DE 24 19.2 31.2 1920 AZ936–1A–24D AZ936–1A–24DE 48 33.6 52.8 4608 AZ936–1A–48D AZ936–1A–48DE 100 70.0 110.0 20,000 AZ936–1A–100D AZ936–1A–100DE MECHANICAL DATA PC BOARD LAYOUT .083 [2.1] .630 [16.0] .866 [22.0] .065 [1.6] .700 [17.8] 2xø.035 [ø0.9] 2 .252 [6.4] 1 .500 [12.7] .016 [0.4] .142 [3.6] .500 [12.7] 3 2xø.051 [ø1.3] 2x.020 SQ. [0.8] .400 [10.2] VIEWED TOWARD TERMINALS 2 3 4 1 WIRING DIAGRAM 2x.012 [0.3] 4 2 1 2x.040 [1.0] 3 4 VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" 3/14/01W