AZ757 20 AMP MINIATURE POWER RELAY FEATURES • • • • • Low cost 20 Amp switching Quick connect terminals 10 kV Surge UL, CUR file E44211 CONTACTS GENERAL DATA Arrangement SPST (1 Form A) Ratings Resistive load: Max. switched power: 480 W or 5000 VA Max. switched current: 20 A Max. switched voltage: 150* VDC or 400 VAC Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 20 A 250 VAC Res. Operate Time (typical) 8 ms at nominal coil voltage Release Time (typical) 4 ms at nominal coil voltage (with no coil suppression) *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR 20 A at 250 VAC, general use, 100k cycles 16 A at 30 VDC resistive 1.5 HP at 250 VAC, 100k cycles Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Surge 10000 V contact to coil (1.2 x 50 µ s) Material Silver tin oxide Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Resistance < 50 milliohms initially (24 V, 1 A voltage drop method) Dropout Greater than 5% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 130°C (266°F) Vibration 0.062" DA at 10–55 Hz COIL Power At Pickup Voltage (typical) Shock Max. Continuous Dissipation 1.3 W at 20°C (68°F) ambient Temperature Rise 29°C (52°F) at nominal coil voltage Temperature Operating 10 g, 11 ms, 1/2 sine (no false operation) Non-Operating 100 g, 11 ms, 1/2 sine (no damage) 245 mW Enclosure P.B.T. polyester Terminals Tinned copper alloy P. C. & quick connect Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. Max. 130°C (266°F) Class B Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 4.6 grams NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 1/15/13 AZ757 RELAY ORDERING DATA COIL SPECIFICATIONS ORDER NUMBER* Nominal Coil VDC 5 Must Operate VDC 3.5 Max. Continuous VDC 8.0 Coil Resistance ± 10% 50 Form A Unsealed AZ757–1A–5D 6 4.2 9.7 72 AZ757–1A–6D 9 6.3 14.5 162 AZ757–1A–9D 12 8.4 19.3 288 AZ757–1A–12D 18 12.6 29.0 648 AZ757–1A–18D 24 16.8 38.7 1152 AZ757–1A–24D * For Type 1 layout add suffix”1”. For Type 2 layout add suffix “2”. For Type 3 layout add suffix “3”. For Type 4 layout add suffix “4”. When suffix “E” is specified for Epoxy Seal, refer to AZ “Relay Technical Notes” on AZ website - Product Resources. Consult factory for other PCB process conditions that may apply. MECHANICAL DATA Outline Dimensions : Standard Type 1 Standard 0.085 [2.15] 0.236 [6.0] 0.224 [5.7] 0.185 [4.7] 0.020 [0.5] Type 2 0.085 [2.15] 0.020 [0.5] 0.250 [6.35] 0.311 [7.9] 0.085 [2.15] 0.224 [5.7] 0.185 [4.7] 0.236 [6.0] 0.236 [6.0] 0.020 [0.5] PCB Layout 0.224 [5.7] 0.185 [4.7] Standard 0.250 0.311 [6.35] [7.9] 0.250 0.311 [6.35] [7.9] 0.961MAX [24.4] 0.961MAX [24.4] 0.02 0.059 [0.5] [1.5] 0.157 [4.0] 0.898MAX [22.8] 0.02 [0.5] 0.02 [0.5] 0.484MAX [12.3] 0.02 0.059 [0.5] [1.5] 0.898MAX [22.8] 0.157 [4.0] 0.02 0.059 [0.5] [1.5] 0.898MAX [22.8] 0.02 [0.5] 0.02 [0.5] 0.484MAX [12.3] 3-Ø0.079 [2.0] 0.02 [0.5] 0.484MAX [12.3] 0.02 [0.5] Type 1 0.661 [16.8] Type 3 0.020 [0.5] Type 4 0.185 [4.7] 0.250 [6.35] 0.311 [7.9] Type 2 0.961MAX [24.4] 0.661 [16.8] 0.961MAX [24.4] 0.02 0.059 [0.5] [1.5] 0.157 [4.0] 0.898MAX [22.8] 0.02 0.059 [0.5] [1.5] 0.898MAX [22.8] 0.677 [17.2] 0.343 [8.7] 0.157 [4.0] 3-Ø0.079 [2.0] 0.295 [7.5] 0.087 [2.2] 0.224 [5.7] 0.236 [6.0] 0.085 [2.15] 0.295 [7.5] 0.295 [7.5] 0.173 [4.4] 0.295 [7.5] 0.087 [2.2] 0.157 [4.0] 0.661 [16.8] 0.661 [16.8] 0.295 [7.5] 0.024 [0.6] 0.961MAX [24.4] 0.677 [17.2] 0.024 [0.6] 0.677 [17.2] 0.484MAX [12.3] 0.484MAX [12.3] 0.02 [0.5] 0.173 [4.4] 4-Ø0.079 [2.0] 0.295 [7.5] 0.02 [0.5] 0.677 [17.2] 0.343 [8.7] 0.295 [7.5] Type 3,4 0.295 [7.5] 0.047 [1.2] 0.047 [1.2] 0.677 [17.2] 4-Ø0.079 [2.0] Wiring Diagram Type 1 Standard (Top view) (Top view) 0.343 [8.7] Type 3 Type 2 (Top view) (Top view) 0.295 [7.5] Type 4 0.047 [1.2] (Bottom view) (Bottom view) (Bottom view) (Bottom view) (Bottom view) Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 1/15/13