AZ8512 MICROMINIATURE POLARIZED RELAY FEATURES • Microminiature size: Height: .212 inches (5.4 mm); Length: .551 inches (14.0 mm); Width: .354 inches (9.0 mm) • Low power consumption • Meets FCC Part 68.302 1500 V lightning surge • Surface mount type with “L” shaped terminals • Single side stable and latching available • UL, CUR file E43203 CONTACTS Arrangement Ratings GENERAL DATA DPDT (2 Form C) Resistive load: Max. switched power: 30 W or 62.5 VA Max. switched current: 2A Max. switched voltage: 110 VDC or 125 VAC Rated Load UL 2 A at 30 VDC resistive (100K cycles, 40°C) 1 A at 30 VDC resistive (200K cycles, 70°C) 0.5 A at 125 VAC resistive (100K cycles, 70°C) Material AgNi + Au plated Resistance < 100 milliohms initially COIL (Polarized) Power At Pickup Voltage (typical) 79mW Single Side Stable 56mW 1 Coil Latching 113mW 2 Coils Latching Temperature Max. 105°C (221°F) Life Expectancy Mechanical Electrical Minimum operations 1 x 108 2 x 105 at 1A, 30 VDC resistive 1 x 105 at 0.5A, 125VAC resistive Operate Time (typical) 3 ms at nominal coil voltage Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) Dropout Greater than 10% of nominal coil voltage Dielectric Strength (at sea level) 1000 Vrms between contact sets 750 Vrms across contacts 1000 Vrms contact to coil Meets FCC part 68.302 1500 V lightning surge Insulation Resistance 1000 megohms min. at 25°C, 500 VDC, 50% RH Humidity 5% to 85% RH Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 70°C (185°F) Vibration Functional Destructive .118” DA 10 to 55 Hz .197” DA 10 to 55Hz Shock Functional Destructive NOTES 1. 2. 3. 4. All values at 20°C (68°F). Relay has fixed coil polarity. Relay may pull in with less than “Must Operate” value. Relay adjustment may be affected if undue pressure is exerted on relay case. 5. For complete isolation between the relay’s magnetic fields, it is recommended that a .197" (5.0 mm) space be provided between adjacent relays. 6. Specifications subject to change without notice. 50 G 100 G Enclosure Plastic sealed Terminals copper alloy, DIP, SMT Weight 1.5 grams 06/01/15 AZ8512 RELAY ORDERING DATA COIL SPECIFICATIONS - SINGLE SIDE STABLE Nominal Coil VDC 1.5 Must Operate VDC 1.13 Max Continuous VDC 2.25 Coil Resistance ± 10% 16 ORDER NUMBER* AZ8512–1.5 2.4 1.8 3.6 41.3 AZ8512–2.4 3 4.5 2.25 3.38 4.5 6.7 64.3 145 AZ8512–3 AZ8512–4.5 5 3.75 7.5 178 AZ8512–5 6 4.5 9.0 257 AZ8512–6 9 6.75 13.5 579 AZ8512–9 12 9.0 18.0 1028 AZ8512–12 24 18.0 36.0 2880 AZ8512–24 *Add suffix “S” after AZ8512 for surface mount. Add suffix “TR” for tape & reel package (600 relays per reel) COIL SPECIFICATIONS - 1 COIL LATCHING Nominal Coil VDC 1.5 Must Operate VDC 1.13 Max Continuous VDC 2.25 Coil Resistance ± 10% 22.5 ORDER NUMBER* AZ8512P1–1.5 2.4 1.8 3.6 58 AZ8512P1–2.4 3 4.5 2.25 3.38 4.5 6.7 90 203 AZ8512P1–3 AZ8512P1–4.5 5 3.75 7.5 250 AZ8512P1–5 6 4.5 9.0 360 AZ8512P1–6 9 6.75 13.5 810 AZ8512P1–9 12 9.0 18.0 1440 AZ8512P1–12 24 18.0 36.0 3840 AZ8512P1–24 *Add suffix “S” after AZ8512P1 for surface mount. Add suffix “TR” for tape & reel package (600 relays per reel) COIL SPECIFICATIONS - 2 COIL LATCHING Nominal Coil VDC 1.5 Must Operate VDC 1.13 Max Continuous VDC 2.25 Coil Resistance ± 10% 11.3 ORDER NUMBER* AZ8512P2–1.5 2.4 1.8 3.6 29 AZ8512P2–2.4 3 4.5 2.25 3.38 4.5 6.7 45 101 AZ8512P2–3 AZ8512P2–4.5 5 3.75 7.5 125 AZ8512P2–5 6 4.5 9.0 180 AZ8512P2–6 9 6.75 13.5 405 AZ8512P2–9 12 9.0 18.0 720 AZ8512P2–12 24 18.0 36.0 1920 AZ8512P2–24 *Add suffix “S” after AZ8512P2 for surface mount. Add suffix “TR” for tape & reel package (600 relays per reel) 06/01/15 AZ8512 MECHANICAL DATA Wiring Diagram 06/01/15 AZ8512 Reel Dimensions Direction of Relay Insertion Tape Dimensions Characteristic Curves Recommended Temperature/Time Reflow Soldering Profile 06/01/15