AZ2701 30 AMP POWER RELAY FEATURES 30 Amp switching 30 Amp AC7a approved 900 Amp Short curcyut cyrrent (carrying) PC mount and quick connect terminals Dielectric strength 4000Vrms Standard (2.4 mm) and wide contact gap (3.0 mm) available • UL, CUR file E44211 • TÜV certifcate R50164753 • • • • • • CONTACTS Arrangement SPST (1 Form X) DPST (2 Form X) Ratings Resistive load: Max. switched power: 840W or 8310VA Max. switched current: 30A Max. switched voltage: 300 VDC* or 400 VAC GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1 x 106 1 x 105 at rated load precautions must be taken. Please contact the factory. Operate Time (max) 30ms at nominal coil voltage Rated Load 30A at 277 VAC, resistive 30k cycles [1][2] Release Time (max) UL, CUR 25A at 277 VAC, resistive, 100k cycles [2] 25A at 240 VAC, resistive, 100k cycles [1] 3HP at 240 VAC, 6k cycles [1] 1.5HP at 120 VAC, 6k cycles [1] TV-10 at 120 VAC, 6k cycles [1] 105 LRA / 20.5 FLA at 240 VAC, 100k cycles [1] 30ms at nominal coil voltage (with no coil suppression) Dielectric Strength 4000Vrms coil to contact (at sea level for 1 min.) 2000Vrms between open contacts *Note: If switching voltage is greater than 30 VDC, special SPST (1 Form X) 10A at 120 VAC, tungsten, 6k cycles [1][2] 3HP at 240 VAC, 100k cycles [2] 1.5HP at 120 VAC, 100k cycles [2] DPST (2 Form X) 10A at 277 VAC, tungsten, 6k cycles [2] 10A at 120 VAC, tungsten, 6k cycles [1] 2HP at 277 VAC, 75k cycles [2] 1HP at 125 VAC, 30k cycles [2] TÜV 27A at 240VAC, cos phi 0.8, 50k cycles [1][2] 25A at 240VAC, cos phi 0.4, 50k cycles [1][2] Material [1] Silver cadmium oxide, [2] silver tin oxide Resistance < 100 milliohms initially (24V, 1A voltage drop method) COIL Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 5% of nominal coil voltage (DC) Greater than 15% of nominal coil voltage (AC) Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) - Class B -40°C (-40°F) to 105°C (221°F) - Class F -40°C (-40°F) to 130°C (266°F) - Class B -40°C (-40°F) to 155°C (311°F) - Class F Vibration 0.062" DA at 10–55 Hz Shock 10g, 11ms, 1/2 sine (no false operation) Operating Non-Operating 100g, 11ms, 1/2 sine (no damage) Enclosure P.B.T. polyester Terminals Tinned copper alloy, Quick connect tabs Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. Power At Pickup Voltage (typical) 1.08W (DC) 1.7VA (AC) Max. Continuous Dissipation 3.8 W at 20°C (68°F) ambient Temperature Rise 50°C (90°F) at nominal coil voltage Temperature Max. 130°C (266°F) - Class B Max. 155°C (311°F) - Class F Weight 120 grams NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 8/17/15 AZ2701 RELAY ORDERING DATA COIL SPECIFICATIONS – DC COIL Nominal Coil VDC 3 6 12 24 48 100 110 200 Must Operate VDC 2.25 4.50 9.00 18.00 36.0 75.0 82.5 150.0 ORDER NUMBER* Max. Continuous VDC 4.2 8.4 16.8 33.7 67.5 140.5 154.7 282.4 Coil Resistance ± 10% 5 19 75 300 1200 5200 6300 21000 COIL SPECIFICATIONS – AC COIL 1 Form X 2 Form X AZ2701–1A–3D AZ2701–1A–6D AZ2701–1A–12D AZ2701–1A–24D AZ2701–1A–48D AZ2701–1A–100D AZ2701–1A–110D AZ2701–1A–200D AZ2701–2A–3D AZ2701–2A–6D AZ2701–2A–12D AZ2701–2A–24D AZ2701–2A–48D AZ2701–2A–100D AZ2701–2A–110D AZ2701–2A–200D ORDER NUMBER* Nominal Coil Must Operate Max. Continuous Coil Current 1 Form X VAC VAC VAC mA ± 10% 6 4.80 6.6 319 AZ2701–1A–6A 12 9.60 13.2 160 AZ2701–1A–12A 24 19.2 26.4 80 AZ2701–1A–24A 48 38.4 52.8 40 AZ2701–1A–48A 120 96.0 132.0 23 AZ2701–1A–120A 220 176.0 242.0 10 AZ2701–1A–220A 9 240 192.0 264.0 AZ2701–1A–240A *For silver tin oxide add suffix “T.” For wide contact gap add “W”. For Class F add suffix “F”. 2 Form X AZ2701–2A–6A AZ2701–2A–12A AZ2701–2A–24A AZ2701–2A–48A AZ2701–2A–120A AZ2701–2A–220A AZ2701–2A–240A MECHANICAL DATA MOUNTING HOLE LAYOUT 1.418 [36.0] 2 x ø.177 [ø4.5] 2.087 [53.0] 1.575 [40.0] .433 [11.0] ø.071 [ø1.8] WIRING DIAGRAMS .250 x .032 [6.3 x 0.81] 1 0 1 0 2 4 1.319 [33.5] 2 4 6 8 6 8 2 FORM X 0 1 1.989 [50.5] 2.067 [52.5] 4 6 1 FORM X Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 8/17/15