AZ2800 30 AMP MINIATURE POWER RELAY FEATURES • • • • • • 30 Amp switching capability DPST-NO and DPDT configuration Meets 8 mm creepage, 4 kV dielectric Meets Class F construction Epoxy sealed versions available UL, CUR file E44211, VDE 40023442 CONTACTS GENERAL DATA Arrangement Ratings DPST-N.O. DPDT Resistive load: Max. switched power: 560 W or 8310 VA Max. switched current:30 A N.O, 3 A N.C. Max. switched voltage: 600 VAC or 30 VDC* UL, CUR N.O. 30 A at 277 VAC General Use, 100k cycles 1 Hp at 120 VAC, 100k cycles 2.5 Hp at 240 VAC, 100k cycles 110 LRA/25.3 FLA at 240 VAC (DC coils only), 30k cycles UL, CUR 3 A at 277 VAC General Use, 100k cycles N.C. VDE N.O. 20A 250VAC, N.C. 3A 250VAC *Note: If switching voltage is greater than 30VDC, special precautions must be taken. Please contact the factory. Material Resistance Silver cadmium oxide, silver tin oxide Life Expectancy Mechanical Electrical Minimum operations 5 x 107 1 x 105 at 30 A 120 VAC Res. N.O. Operate Time 15 ms typical 25 ms maximum with bounce Release Time 10 ms typical 25 ms maximum with bounce (with no coil suppression) Dielectric Strength 1500 Vrms contact to contact (at sea level for 1 min.) 4000 Vrms contact to coil 2000 Vrms between contact sets Insulation Resistance 109 ohms minimum at 500 VDC Dropout DC: Greater than 10% of nominal coil voltage AC: Greater than 20% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage DC: -40°C (-40°F) to 95°C (203°F) AC: -40°C (-40°F) to 75°C (167°F) -40°C (-40°F) to 155°C (311°F) <50 milliohms initially (6 V, 1 A voltage drop method) Storage Vibration 0.062" DA at 10–55 Hz Shock Operational, 10 g for 11 ms 1/2 sine pulse (no contact opening > 100usec) Non-destructive, 100 g for 11 ms 1/2 sine pulse Enclosure P.B.T. polyester Terminals Quick connect tabs COIL Power At Pickup Voltage (typical) DC: 0.925 W AC: 2.6 VA Max. Continuous Dissipation DC: 5.0 W at 20°C (68°F) AC: 7.0 VA at 20°C (68°F) Temperature Rise DC: 48°C (86°F) at nominal coil voltage AC: 68° C (122°F) at nominal coil voltage Temperature Max. 155°C (311°F) Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 86 grams NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 3/3/08W AZ2800 RELAY ORDERING DATA COIL SPECIFICATIONS – DC Coil ORDER NUMBER* Nominal Coil VDC 6 Must Operate VDC 4.5 Max. Continuous VDC 10.5 12 9.0 20.7 86 AZ2800–2C–12D 24 18.0 41.8 350 AZ2800–2C–24D 48 36.0 83.4 1390 AZ2800–2C–48D 110 82.5 190.5 7255 AZ2800–2C–110D COIL SPECIFICATIONS – AC Coil Nominal Coil VAC 12 Coil Resistance ± 10% 22 AZ2800–2C–6D 60 Hz [1] ORDER NUMBER* 35.7 AZ2800–2C–24A Max. Continuous VAC 15.6 19.2 31.2 120 96.0 156.0 33.5 830 208 166.4 270.4 19.3 2600 AZ2800–2C–208A 220 176.0 286 18.1 2870 AZ2800–2C–220A 240 192.0 312.0 17.3 3800 AZ2800–2C–240A 277 221.6 360.1 14.5 4700 AZ2800–2C–277A 24 Nominal Current mA ± 10% 325 Coil Resistance ± 10% 9.5 Must Operate VAC 9.6 154 AZ2800–2C–12A AZ2800–2C–120A *Add suffix “E” for epoxy sealed version. Add suffix “K” for 0.187x.020 or “J” for 0.187x.032 QC coil terminals. Substitute '2A” for “2C” to indicate DPST (N.O.) contacts. Add suffix “E” to “2A” or “2C” to indicate AgSNO2 contacts. [1] For 50 Hz coil replace “A” with “A5” (example: “A2280-2C-24A5”). MECHANICAL DATA .31 [8.0] .58 [14.8] WIRING DIAGRAM .18 [4.6] .63 [16.0] 1.36 [34.5] 1.00 [25.4] .15 [3.8] 6 x.250 [6.35] 1.62 [41.1] 2.35 [59.7] 8 x.032 [.81] 0 2 4 3 6 8 7 1 1.04 [26.4] 2 FORM C 2 x DIM "A" DIM. "A" = .250 [6.35] x .032 [.81] THK - STANDARD 0 DIM. "A" = .187 [4.75] x .020 [.51] THK - "K" SUFFIX 8 x.45 [11.4] 2 4 6 8 .13 [3.3] 1 2 FORM A 2.69 [68.4] VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 3/3/08W