AZ9731F

AZ9731F
30 AMP MINI-ISO
AUTOMOTIVE RELAY WITH
FUSE
FEATURES
• Quick connect terminals
• 30 Amp contact rating (30A Fuse)
• Blade fuse design
• Steel mounting bracket
• ISO/TS 16949, ISO14001
GENERAL DATA
CONTACTS
Resistive load:
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 30 A 14 VDC Res.
Max. switched power: 420 W
Operate Time (max.)
7 ms at nominal coil voltage
Release Time (max.)
5 ms at nominal coil voltage
Arrangement
SPST (1 Form A)
Ratings
Max. switched current: 30 A
Max. switched voltage: 75 VDC
Material
Silver tin oxide
50Hz 750 Vrms coil to contact
Dielectric Strength
(at sea level for 1 min.) 50Hz 500 Vrms contact to contact
Resistance
< 50 milliohms initially
(24 V, 1 A voltage drop method)
Insulation Resistance
100 megohms min. at 500 VDC, 20°C
50% RH
Dropout
Greater than 20% of nominal coil voltage
Ambient Temperature
Operating
Storage
-40°C (-40°F) to 85°C (185°F)
-55°C (-67°F) to 155°C (311°F)
Vibration
1.27mm DA at 10-40 Hz
Shock Resistance
147m/s2
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy
0.25 Quick Connect
COIL
Power
At Pickup Voltage
(typical)
760 mW
Max. Continuous
Dissipation
3.0 W at 20°C (68°F)
Temperature Rise
70°C (126°F) at nominal coil voltage (30A)
Temperature
Max. 105°C (311°F)
At nominal coil voltage
11ms
Note: Allow suitable slack on leads when wiring, and do
not subject the terminals to excessive force.
Weight
32 grams
RELAY ORDERING DATA
COIL SPECIFICATIONS
Nominal Coil
VDC
6
12
24
Must Operate
VDC
3.9
7.8
15.6
Max. Continuous
VDC
7.8
15.6
31.2
Coil Resistance
± 10%
20
80
320
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
6/11/14
AZ9731F
RELAY ORDERING DATA
AZ97 31F-1A-12 D
6D - 6 Volt coil
12D - 12 Volt coil
24D - 24 Volt coil
Form A - SPNO Single pole normally open
Basic series designation - AZ9731F
MECHANICAL DATA
NOTES: Dimension are in millimeters. Inch equivalents are given for general information only. Tolerance: ± .010"
6/11/14