BD2626 Dual Band 2-Way SMT Power Divider 2400~2900MHz WCDMA, WiBro & LTE Device Features Typical Isolation = 25.0 dB Typical Insertion Loss = 0.6 dB MSL 1 moisture rating Small Size and Low Profile Lead-free/RoHS-compliant SOT-26 Plastic Package BD26XX(XX=Wafer number) Product Description Typical Performance1 BeRex’s Divider BD2626 is designed for WCDMA WiBro & LTE band with low Insertion Loss and Isolation. This chip is fully passivated for enhanced performance and reliability and packaged in RoHS-compliant with SOT-26 surface mount package. Parameter Min Frequency Range Insertion Loss 2400 Isolation 21.5 Typical 0.6 Max Unit 2900 0.8 MHz dB 28.0 dB IRL(S11) -26.0 -29.0 dBm ORL(S22/S33) Amplitude Balance Phase Balance -23.0 0.1 0.75 -26.0 0.15 1.5 dBm dB deg *All specifications apply to the following test conditions, 1. Device performance _ measured on BeRex E/B at 25°C, 50ohm system. 2. Insertion Loss: Above 3.0dB. Applications Absolute Maximum Ratings Base station Infrastructure Commercial/Industrial/Military wireless system Parameter Input Power Storage Temperature Operating Temperature Rating 1.5W CW dBm -55 to +155°C -40 to +85°C Operation of this device above any of these parameters may result in permanent damage. Evaluation Board Drawing Function Block Diagram Pins 2,4 and 6 must be DC and RF grounded. BeRex ●website: www.berex.com ●email: [email protected] 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2013 BeRex Rev. B BD2626 Dual Band 2-Way SMT Power Divider 2400~2900MHz WCDMA, WiBro & LTE Typical Test Data BeRex Parameters Unit WCDMA, WiBro & LTE Frequency Range MHz 2400 2500 2650 2800 2900 Insertion Loss dB 0.61 0.59 0.61 0.66 0.64 Isolation dB 23.3 25.1 28.2 25.8 22.0 IRL(S11) dB -21.8 -23.6 -26.4 -29.0 -27.7 ORL(S22,S33) dB -22.6 -23.1 -23.0 -22.2 -21.3 Phase Diff. deg 0.75 0.75 0.75 0.75 0.75 Amplitude Balance dB 0.07 0.07 0.07 0.09 0.09 Insertion Loss vs. Frequency Isolation vs. Frequency IRL vs. Frequency ORL vs. Frequency ●website: www.berex.com ●email: [email protected] 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2013 BeRex Rev. B BD2626 Dual Band 2-Way SMT Power Divider 2400~2900MHz WCDMA, WiBro & LTE Package Outline Drawing Suggested PCB Land Pattern and PAD Layout PCB Land Pattern PCB Mounting Ø0.8 2.3 0.4 0.9 0.65 2.2 Ø0.8 Note : All dimension _ millimeters PCB lay out _ on BeRex website BeRex ●website: www.berex.com ●email: [email protected] 3 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2013 BeRex Rev. B BD2626 Dual Band 2-Way SMT Power Divider 2400~2900MHz WCDMA, WiBro & LTE Package Marking XX = Wafer No. Tape & Reel SOT-26 Packaging information: Tape Width (mm): 8 Reel Size (inches): 7 Device Cavity Pitch (mm): 4 Devices Per Reel: 3000 Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating MSL Rating: Level 3 at +265°C convection reflow Standard: JEDEC Standard J-STD-020 NATO CAGE code: 2 BeRex N 9 6 F ●website: www.berex.com ●email: [email protected] 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2013 BeRex Rev. B